Are you having problems with your dishwasher filling up with too much water or not draining?
This is a common problem people have with their dishwashers, and often it can be something simple that is causing it. In this guide, we will discuss the most likely causes of the problem and how you can fix them.
If your dishwasher is filling up with too much water, two components are most likely to be causing the problem – the water inlet valve and the float switch. If your problem is more your dishwasher is not draining, skip the first two components and start by checking the drain impeller.
The first component to check if your dishwasher is overfilling is the water inlet valve. The water inlet valve opens up to allow water into your dishwasher and then closes once your dishwasher has the correct amount of water. If it becomes faulty, your dishwasher might fill up with too much water or fill up with water when it is turned off.
To check the water inlet valve, you need to:
The float switch tells the dishwasher control board when the dishwasher has enough water in it. If it doesn’t work properly, your dishwasher might overflow with water or fill up with water when it shouldn’t.
To check the float switch, you need to:
The best place to start if your dishwasher is not draining is to check the drain impeller.
To check the drain impeller, you need to:
The drain pump motor turns on when your dishwasher is draining. If it stops working, your dishwasher will not drain correctly.
Here’s how to check the drain pump motor:
The next component to check is the drain solenoid. The solenoid opens the drain valve to allow water to drain out from the dishwasher after the cycle ends.
To check it:
The drain valve can sometimes get blocked, and this stops water from being able to drain out after a cycle.
To check the drain valve, you need to:
This component helps to stop the water from draining back into the dishwasher after it has drained. When it becomes faulty, your dishwasher might stay filled with water.
To check this component, you need to:
The final component to check is the drain hose. As the name suggests, the drain hose carries the dirty water out of the dishwasher at the end of the cycle. When it gets a blockage in it, your dishwasher may not drain.
To check the drain hose, you need to:
Whether it's rising water bills or environmental concerns, people now more than ever want to…
A dryer making a grinding noise while it's running indicates that there is a problem…
Error codes are designed to alert you when there is an issue with your Maytag…
A washer that won’t spin can be incredibly frustrating. Picture this: you’ve gone to get…
Is your GE dishwasher totally failing to turn on? Or perhaps the display is working…
GE washers are usually pretty reliable appliances, but even the most reliable washer has issues…
Leave a Comment