1910 Arrived on site and replaced previously diagnosed compressor. Charged with 145psi of nitrogen and found no signs of any refrigerant leaks. Vacuumed system and charged to specs with 4.24oz of r134a. Allowed for complete frost pattern development on evap. No signs of any restrictions. Unit now working as designed. Job complete.

Arrived on site and replaced previously diagnosed dual valve and control kit(control and dispenser UI). Ice maker now completed diagnostics properly. Valve opening and closing as designed. No leaks detected. Job complete.

"Arrived on site to inspect unit for FC ice maker not working, door seals ring torn, and a loud noise coming from unit. Upon closer inspection found both French door seals are torn at top section of both doors. Will need to order contol kit and return. Office to reschedule. ; ordrng 1 W11533213 (Control kit) and 1 W11330486 (Panel ui)"

"Arrived on site to inspect unit for drum not rotating during cycle. Upon closer inspection found broken belt, replaced broken belt. Tested unit unit is running as intended."

"Arrived on site to test unit for error code. Found no stored error codes. Completed diagnostics with no issues. Replaced run cap and shift actuator and belt as a precautionary and completed diagnostic cycle again. No signs of gearcase failure, suspension is good. No leaks detected. Job complete."