"Arrived on site to test unit for door issues. Upon arrival customer presented issue, when pulling the door on the left side, door becomes cockeyed and will not slide open and closed easily. Advised customer that is part of the design, there is an empty space on the back of the rail in case the wheel skips on the rail or if the door is accidentally opened cockeyed. When pushed back in the door will go back to its original location. Per manufactures recommendation, advised to only open the FC door in the middle of the handle, do not open from left or right side. Customer also had a concern that the dispenser is not dispensing water. Bled the water lines from any air, dispenser is now dispensing water properly. Unit is now running as designed, no leaks detected, no parts installed, job complete."

"Arrived on site to test unit for leak. Upon arrival customer presented issue, stated every time unit is ran it will leak from the plastic inlet valve assembly. Entered diagnostics and started a cycle, when unit started to fill the inlet assembly immediately started to leak due to crack (image attached). Will need to order inlet assembly for return visit. Ordering part, no parts installed, rescheduled for 10/30.; ordrng 1 W11535094 (Water inlet assembly)"

Arrived on site to replace hinges. Found 1 hinge damaged. Will order hinge and reschedule for 10/16. Will need 2 hour job ; ordrng 1 W10874474 (Hinge) and 1 2hourjob (2 hour job)

"JF42NXFXDE02 Arrived on site for RC not cooling. Upon arrival, found Fc cooling but RC warm. RC fans running. Proceeded to expose compressor area and found loose connection to the stepper valve. Resecured connector and inspected all other connectors. Powered unit back on and now refrigerant is flowing to the evaporator (picture attached). Unit is functioning as designed. No water leaks detected at this time. No parts replaced"

Arrived on site to replace harness. Replaced main harness test unit and unit test good job complete.