"Arrived on site to test unit for no power, tested unit for motor is ceased and will need to get replaced, ordering motor and blower, office to reschedule ; ordrng 1 WP694089 (Blower wheel) and 1 279827 (Motor)"

Arrived on site to test unit for not completing wash cycles. Found errors f8e1(no/long fill) and f5e2(lid lock fault). Verified water is filling properly and water lines are correct. Found no obstructions or issue with latch engaging/disengaging. Advised customer control would need to be replaced.

"Arrived on site to test unit for noise. Found coin was caught in basket. Removed coin, noise is no longer present. Job complete."

Arrived on site to test unit for popping sound and back burners not working. Customer had another appliance company perform repairs and advised her to have harness and control replaced. They replaced a burnt convection motor. Checked continuity through harness and found no signs of any breaks or damage. No physical damage to harness. Back burners are working properly. Oven preheated as designed to 350. No current parts recommended as no issues present. Unable to replicate arcing. Job complete.

Arrived on site to test unit for screeching when filling. Found its screeching while in sense mode from drive belt slipping. No signs of gearcase failure. Recommend replacing cam and belt. Office to reschedule. ; ordrng 1 W10721967 (Cam) and 1 WPW10006384 (Belt)