Arrived onsite for a wall oven getting a fan error to possibly replace previous ordered parts. I found the red wire on the motor harness had been cut and it arced to the trim around the blower. I replaced the fan and tested. I still had no voltage at the fan but I did have supply voltage on P5 at the appliance manager. I replaced the appliance manager and tested. The oven is working as designed. Call complete.

Arrived onsite for a washer that squeals at the beginning of the rinse cycle. I found the belt loose and stretched out causing the sound. I replaced the belt and tested the machine. The washer is working as designed. Call complete.

Arrived onsite for an ice machine that will not turn on. I found the external drain pump not passing neutral. I replaced the pump and tested the machine. All is working as designed. Call complete.

"Arrived on site for a defective compressor. Replaced compressor assembly,vacuumed system down with sealed system exposed recharged system pressures held ran compressor test good pressure good frost formation on evaporator plate. Reassembled unit ran diagnostics checked all water lines and tubing connections no leaks unit passed all diagnostic test."

Arrived onsite for a refrigerator making a clicking noise periodically. I found the dampener very loud causing the noise. I replaced the dampener and now its quiet and is working as designed. The customer also asked about the compressor noise. I explained the compressor sounds normal and I explained how the compressor can ramp up. The customer understood. Call complete.