"Arrived on site to install previously ordered parts. Replaced gearcase,agitator, and basket. Calibrated unit. Test unit by running a spin cycle. Unit is operating as designed. No leaks present at this time. Job complete"

Arrived onsite for sealed system repair. Replaced failed compressor and dryer. Pulled vacuum and held. Charged per spec and tested. Unit is running and cooling. Notified customer to give 24hrs and will monitor bottle of water in the freezer. Job complete

"Arrived onsite for unit making lots of noise when in use. Upon arrival inspected unit. Found rollers and idler worn. Also belt was worn. Replaced idler pulley, rollers (2) and belt. Unit is now functioning properly. Job complete"

Arrived on site for unit mute while setting is on. Test unit and there is no sound pressing keys or when timer is done. Found unit is not on WiFi. Connected to WiFi. Power cycled unit and test. Preheat oven and unit sounded when ready. Ran a cook time of 2 minutes and Unit is now responding. Job complete

Arrived on site for lights out and temperature issues in Rc. Upon arriving. Inspected unit found FC module is out. Replaced 1 FC module and FC all of the top RC lights now operate correctly. Checked FC temperature and is 1 degree. Checked RC temperature and is at 42 degrees. Found condenser coil completely blocked with sheet of dust . Cleared condenser coil and monitored temperature. Observed temp drop to 40. Uploaded picture on SD. Unit is operating as designed. Job complete