Arrived on site for oven light not turning off and oven not heating . After running some diagnostics test on control and door switch . Found one of the wires on switch was not properly inserted into door switch molex . Reinstalled connection . Light is responding properly . Unit is now heating . No parts installed. No gas leaks detected at time of service . Job complete

"MVW7232HC2 Arrived on site for F8E1 error. Upon arrival, proceeded to enter diagnostics to check both cold and hot water valves. Cold valve energizes but no water coming out. Hot valve is good. Removed hose from valve and found water dribbling. Showed customer and agreed this is a plumbing issue. Customer will take care of plumbing issue and re test. Activated all other individual components and all parts are functioning as designed. No water leaks present at this time. No parts replaced"

"Arrived on site to inspect unit for not starting, but having power. Upon closer inspection found latch not clicking locked as well as wire to drain severed. Reattached wire, and replaced latch, unit is now running as intended. No leaks present at this time. Job complete. USED W11513248"

Arrived on site to inspect burners for shutting off. Upon closer inspection found burners cycling on and off as designed. Informed customer burners cycle on and off to maintain proper temperature. Found all 4 burners cycling and coming back on. Job complete. NO PARTS USED

"WDTA50SAKZ1 Arrived on site for unit not dispensing. Upon arrival, customer stated they will have to manually open dispenser after first initial wash. Proceeded to replace dispenser and control. Re tested and now dispenser opened. Ran a overall checkup diagnostic and now unit is functioning as designed. No water leaks present at this time. W11412300 dispenser and W11672039 control"