Arrived on site to diagnose unit with no power. Tested the unit and found the breaker was turned off. Turned the breaker back on and preheated the oven to 500?F; the breaker did not trip during operation. Advised customer to leave the unit on for an hour and a half to complete the burn-in process. Job complete.

"Arrived on site to test unit for dent. Inspected and identified damage on filter and documented. Filter I received was for the 30 model, this one is the 36 so the filter is too small. No one on site for signature. Ordering correct filter, no parts installed, office to reschedule.; ordrng 1 W11100653 (Filter)"

Arrived on site to diagnose a loud grinding sound during the wash cycle. Placed the unit in test mode and found the drain motor operating normally. Manually turned the wash motor and confirmed a loud grinding noise was present. Replaced the sump and motor assembly. Tested the unit after repair; it is now operating properly with no unusual noises. No leaks detected. Unit is working as designed. Job complete.

"Arrived on site to test unit for noise, turned unit on and noticed a loud squealing noise coming from rollers, replaced all parts from repair kit and tested unit is now running as designed job complete installed 4392067"

"Arrived on site to test unit for not cooling properly, tested unit found defrost failure, heater is not attempting to engage, frost all the way to the bottom, defrosted evaporator replaced heater and control, tested unit heater is now engaging unit is now running as designed no leaks detected job complete installed W11742382, W11557671"