"Arrived on site to test unit for not working properly, tested unit found drain pump not turning off,inspected pressure hose and found no issues, replaced control and tested unit is now running as designed no leaks detected job complete installed W11608056"

"Dishwasher model WDF330PAHS4. Arrived on site to test unit for not working properly. Tested unit and found wash motor not engaging, though receiving 120VAC. Replaced sump W11025157. Tested unit; it was now running as designed. No leaks detected. Job complete."

"Arrived on site to test unit for not broken ice bin and ice production not stopping, tested unit found cracked ice bin and ice maker and bail arm working good, replaced ice bin unit is now functioning as designed job complete installed WPW10558424"

"Arrived on site to test unit for no operation. Upon arrival customer stated drain pump constantly runs unless power is removed. Applied power, drain pump immediately engaged indicating a pressure system fault. Entered diagnostics and found F3E1 (pressure system fault) error code stored. Per S code S153EB, followed TSP W11766193. Both model and serial number fall within the rework. Cleared error code and reset control, cycled power, drain pump still immediately engages. Inspected pressure hose, found no kinks, punctures or restrictions. Valve is not leaking. Pressure switch on the control has failed. Replaced control (W11603810) and applied power, drain pump no longer immediately engages. Ran a calibration cycle successfully. Unit is now running as designed, no leaks detected, job complete."

"Arrived on site to test unit for whirring noise. Upon arrival customer stated unit made a loud noise and stopped running, when restarting the cycle, drum did not spin and unit made a whirring noise. Verified issue, drum is not turning but motor is running then shutting off. Gained access to internal components, found belt in good shape. Motor is not spinning due to clothing article in blower wheel housing. Blower wheel has wear marks. Motor is seized. Replaced motor (279827) and blower wheel (WP694089) and tested unit, all components are properly engaging and unit is now running as designed, job complete."