"Arrived on site to convert unit to LP converted unit and tested, unit is now running as designed no leaks detected job complete installed W11581317"

"Arrived on site to test unit for not heating. Found voltage to igniter was correct and gas valve was attempting to open but no gas flow. Replaced flow igniter(279311), coil valve(wpw10328463) and flame sensor(wp338906). Unit is now igniting but noticed flames were way too high. Unit is being supplied LP. Needing LP conversion kit. Office to reschedule. ; ordrng 1 W11581317 (LP conversion)"

"Arrived on site to test unit for no operation, tested unit found unit has power but not turning on, tested all components and found them good, exposed control and found a connection burned on control, replaced control and fixed connection, tested unit unit now running as designed, job complete"

Arrived onsite for will not turn on. Upon arrival inspected unit. Console is not responding. Checked polarity and is good. Got correct voltage from control to console. Need to replace console. Replaced the control panel W11413567 and test unit. Unit operates as designed. Job complete

"Arrived onsite to install previously ordered parts. Replaced control W11546690, harness W11546681, and thermistor WPW10384183. Test unit and unit now goes into defrost . Job complete"