"Arrived on site to replace previously diagnosed FC slides, replaced and tested unit is now functioning as designed, job complete"

"Arrived on site to test unit for FC door not opening, tested unit found slides are not rolling properly, need excessive force to pull FC door open, need to replace left and right slides, ordered parts, office to get authorization, rescheduled for 9/28; ordrng 1 W11668671 (Left slide) and 1 W11668671 (Right slide)"

"Arrived on site to test unit for excessive shaking, tested unit found suspension extremely bouncy and drain line at floor level, stated to customer that drain line needs to be installed properly per installation instructions, replaced suspension and tested, unit is now running as designed, no leaks detected job complete"

"Arrived on site to test unit for not spinning clothes out, tested unit found no stored error code, rand diagnostic cycle and found all components activating properly, put unit into high spin wit no issues detected, inspected gear case, no signs failure or oil, activated normal wash cycle and found that spin was deactivated, advised customer to always check spin setting and monitor for improvement, at this time unit is running as designed,no leaks detected job complete"

"Arrived on site to test unit for noise, tested unit found noise coming from fail bearing, wheel ceased up and made a flat spot on rubber, replaced all parts in repair kit, tested unit, noise is now gone unit is running as designed, job complete"