Arrived onsite for unit not completely freezing food and condensation in cabinet. Inspected unit and found doors not closing properly on the right side. Doors is misaligned. Ordering freezer door rail assembly. Office to reschedule ; ordrng 1 WRF555SDFZ16 (Bracket) and 1 WPW10330993 (Bracket right) and 2 W11658402 (Slide)s and 1 WPW10284682 (Adapter left) and 1 WPW10284683 (Adapter left) and 1 12002497 (Gear kit)

"Arrived on site to replace previously diagnosed FC door, verified that the door was needed, replaced door, and tested, water is dispensing and gasket is sealing good, job complete"

Arrived on site to replace previously diagnosed. Removed drier and isolated high and low side. Ran nitrogen through system and found low side(cap tube) drier spitting. Removed evap and and found evap was full of refrigerant after charging system with nitrogen. Replaced evap and ran nitrogen through system found same restriction present on low side from cap tube entering drier. Cut 2 off and put new drier. Vacuumed system and found no improvement with frost pattern on evap(nothing beyond top two coils) after 1hr of running. Called Techline and replaced drier again per recommendations. Ran nitrogen and same spitting happening .obvious restriction within cabinet. Advised customer to contact whirlpool as not confident no further repairs would correct issue. Job complete .

Arrived on site to test unit for not cooling properly. Found evap did not have frost beyond top two coils. Recommend evap replacement for potential restriction. Needing 2hrs and SS tech on return visit. No lock rings needed. Unit is R600a. Office to reschedule. ; ordrng 1 W11598434 (Evap) and 1 W11574734 (Compressor) and 1 WPW10143759 (UV drier) and 1 W11506635 (Access valve)

"Arrived on site to test unit for loud grinding noise. Customer stated they were under the impression unit would be covered under 10yr manufacturer warranty. Advised customer on what parts would be covered if needed(wash basket and drive motor only). Customer denied service and stated they would be looking into replacement. No service provided, no fee collected. Job complete."