"Arrived on site to test unit for ERR code, tested unit found is acting erratic with ERR error popping up and not powering on, replaced control and test multiple times, unit is now running as designed, if issues persist recommend returning with latch and UI, job complete"

"Arrived on site to replace previously diagnosed ice maker and harness, replaced parts and tested, ice maker completed diagnostic cycle and filled with water, noticed that water pressure is extremely low, removed filter and tested pressures went to normal, advised customer to change filter Asap, for optimal ice maker operation

Arrived on site to test unit for right front burner not working on low and getting stuck on high. Test unit and found and switch. Replaced switch test unit and unit test good job complete.

Arrived on site for water leaking from door ice dispenser. Upon arrival customer mentioned that ice melts overnight and causes drip tray to over fill. checked temperatures in FC and RC and got 3.2 in FC and 38.1 Rc. Inspected sealed system for leaks with light and no leaks present . Inspected dispenser door and is sealing correctly. Found ice cubes under ice container that is causing the issue. Cleared ice and frost from ice container. Advised customer to remove ice container from time to time to be sure there is no ice or frost building up. Unit is operating as designed. No water leaks present at this time.

Arrived on site for rear center burner not fitting correctly. Upon arrival inspected unit and found rear center burner head is incorrect. Replaced rear center burner head with burner head W11084067. Job complete