Appliance Repair Kempner Texas

Appliance Express Rated 4.8 out of 5 stars based on 41 customer reviews

We serviced a
MAYTAG WASHER
Model MVW7232HW
Near Kempner, TX 76539
Tyler
Job Details: 01/20/2023
Arrived on site for washer needing previously diagnosed harness. Upon arrival reconfirmed issue. Installed harness and reassembled and tested unit. Found washer working in diagnostics and a normal wash cycle with cloths in it and no leaks. Call complete
We serviced a
WHIRLPOOL FREEZER
Model WZF34X16DW08
Near Kempner, TX 76539
Tyler
Job Details: 01/13/2023
"Arrived on site for freezer needing previously diagnosed door, nameplate, and silicone. Upon arrimstalled required parts. Found results the same as prior trips with door not fully sealing in top left area with all possible adjustments failing to resolve issue.called techline and spoke with Adrian sr#7735366134. Sent photos of liners and door alignment and determined with aid of techline that unit is warping liner. Whirlpool will reach out to customer on further steps. Call complete"
We serviced a
MAYTAG WASHER
Model MVW7232HW
Near Kempner, TX 76539
Tyler
Job Details: 01/06/2023
Arrived on site for washer not completing cycles. Upon arrival confirmed issue but found no errors in diagnostics. Found control working but clutch was intermittently completing agitation/spin transition. Replaced clutch and slide and got same results. Found intermittent connections within wiring. Will need office to reschedule once availability of harness is known.; ordrng 1 W11130936 (Harness main)
We serviced a
MAYTAG WASHER
Model MVW6230HW2
Near Kempner, TX 76539
Tyler
Job Details: 01/06/2023
Arrived on site for washer not turning on. Upon arrival confirm complaint . Report of findings to techline Kurt sr#7735441513. Was instructed to give information to customer and have them called extended warranty for further assistance . Unit is nonREPAIRABLE at this time Call complete
We serviced a
MAYTAG WASHER
Model MVW7232HW
Near Kempner, TX 76539
Tyler
Job Details: 12/30/2022
"Arrived on site for washer not completed cycles. Upon arrival confirmed issue and found f7e4 in diagnostics.after inspection of rotor, stator and slider and verified parts integrity I then found cause of failure was control not sending any power to motor. Replaced control and found unit could cycle through all settings in normal operation as designed. Call complete"
Robert Domitz
Kempner, Texas
10/21/2022
Very professional. Gave us some good advise.
Overall Experience
Kempner, Texas
07/29/2022
Quick and easy.
Overall Experience
Kempner, Texas
07/17/2022
Overall Experience
Kb from Kempner
Kempner, Texas
06/20/2022
Tyler was very courteous prompt on time and explain the whole process. Very satisfied with his service
Overall Experience
Brent McGlothin
Kempner, Texas
05/09/2022
Tyler was great! Cordial, polite and professional.
Overall Experience