Arrived on site for dryer not tumbling. Upon arrival confirmed issue and found after disassembly of unit that the belt had broken. Found no motor or pully faults. Replaced belt and found unit working as designed. Call complete

RANGE WHIRLPOOL WFE505W0JS0 "Arrived on site for arrange that would not power up the control but the burners would still work. Inspected unit and work area. Tested voltage at the terminal block and found 2.47 V going from L1 to neutral, 244 V going from L2 to neutral, and 244 V going from L1 to L2. Checked voltage at the wall and confirmed similar voltage. Spoke to SW and was advised that this was in fact a logical issue. Advise customer to have an electrician come fix his outlet or breaker. Call complete."