Arrived on site to install heating element due to recalled gold colored bushing element and dishwasher. Upon arrival confirmed issue in Maid required repair Denver assembled and tested unit and found unit functioning as designed with no leaks call complete

"Arrived to inspect light always on. I found the oven light would stay on regardless of door position and tested further. Service mode showed the relay was not stuck closed, as the light would go out when commanded within service mode testing. The switch tested correctly, including with and without the harness attached and at the board contacts, there were 233 Ohms, but no documentation to confirm. The right front burner switch had excessive carbon from the contracts and I recommended replacement.

Arrived on site for washer not draining/ spinning water from cloth. Upon arrival gearcase had failed along with hub drive missing/broken inner teeth. Replaced both components and tested unit found no leaks and unit functioning as designed. Call complete

Arrived on site for dishwasher needing previously diagnosed sump. Upon arrival installed required part. Tested unit and found it functioning as designed. Call complete

Arrived on site to follow up on range control replacement. Replaced control and overlay. Ran unit at 350 to verify proper Temps are reached and unit is cycling. Verified all is working as designed.