Arrived on site to test unit for not heating properly. Found bake igniter not sensing flames and would continuously attempt to reignite. Replaced bake igniter(W11524031) and tested unit to 350with no issues. Unit is now working as designed. Job complete.

Arrived on site to test unit for oven not cycling and getting to hot. Found relay to bake element was staying on. Replaced control(W11546066) and d oven sensor(WPW10181986). Verified elements now cycling as designed. Job complete.

Arrived on site to test unit for not cooling. Found crimp fitting was leaking refrigerant. Needing sealed system repair. Needing 2hrs on return visit. Office to reschedule. ; O-emld tckt

Arrived on site to test unit for tripping breaker. Heated unit to multiple Temps with no issues. When heated to 500contacted contractor and stated unit needs to run at 500 for 2hrs. Contractor stated to leave unit running and he would return and shutunit off. Unit working as designed if issue persists recommend breaker replacement. Job complete.

"Arrived on site to test unit for not working properly, tested unit found broken ceramic element holder, replaced and tested unit is now running as designed job complete installed W11724411"