Arrived on site for 5e burners being too high when on low. Sett all burners to low. Removed knob and used inner adjustment to regulate low flame. All burners now have a high and low flame. Call complete. No parts

Arrived on site for ice maker not working. Ran diagnostics and found water valve stopping. Full frost pattern on evaporator. All other components pass test. Replaced water valve. Verified operation. Call complete. W10897719

Arrived on site for refrigerator not cooling or over cooling. Customer also says when it is not working she can hear a click every 7 sec. All components working at this test. All pass test. Replaced compressor start device. As this may will click and cause it not to cool. Unit started up as normal. Call complete.

"Arrived on site for moisture building and leaking, found moisture building along the center mullion. Confirmed all door gaskets are sealing. Replaced mullion. Advised customer to turn on humidity control. Verified operation. Call complete. WP12722803AP"

"Arrived on site for oven showing power loss on screen. Says it happens everyday. No errors stored. All components working in test mode. Removed top panel. Verified voltage at 250v. 126v from each leg to ground and neutral. Zero from ground to neutral. Bake pulls 12 amps, broils pulls 16. Replace main control as series of elimination. Verified operation. Advised customer to prevent problems like this unit must be connected to WiFi. Referred to wifi team. Call complete."