Joe Z

Appliance Express Rated 5.0 out of 5 stars based on 187 customer reviews

We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Del Valle, TX 78617
Joe Z
Job Details: 04/23/2024
"Arrived onsite for water continues to enter dishwasher and leaks out. Upon arrival,inspected unit. Found water valve weeping and water stream coming from inlet on inside of tub. Unit does drain correctly. Need to replace valve. Turned supply water off. Ordering Water fill valve and control to have on hand. Office to reschedule ; ordrng 1 W11175771 (Valve) and 1 W11305308 (Control)"
We serviced a
WHIRLPOOL RANGE
Model WFE320M0JS3
Near Elgin, TX 78621
Joe Z
Job Details: 04/23/2024
"Arrived on site for not heating correctly, upon arrival, test unit by preheating oven to 350. Used thermocouple to monitor temperatures. Unit preheated correctly then began to heat cycle. Averaged 3 cycles and get an average of 356. Unit is operating as designed. After series of questions with customer, he said all of his foods are cooking correctly. I believe inspector used incorrect thermometer when testing. Unit is operating as designed. Job complete. No parts needed"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF331PAHS1
Near Elgin, TX 78621
Joe Z
Job Details: 04/23/2024
"Arrived on site for not draining, upon arrival,inspected unit and there is water sitting at bottom of tub. Ran drain but motor only hums. Ran diagnostics and get error codeF8-E2 drain motor electrical issue. Drained out all water with shop vac. Removed drain pump and found debris lodged in impeller. replaced Drain pump W10876537. Test unit and fills but wash motor never operates. Am able to drain. Ran diagnostics again and get F4-E3 motor not operating. Need to replace sump and motor. Replaced sump and motor W11025157 and re test unit. Unit is now operating as designed. No leaks present at this time. Job complete"
We serviced a
WHIRLPOOL DRYER
Model WED4850HW0
Near Elgin, TX 78621
Joe Z
Job Details: 04/23/2024
"Arrived on site for unit not powering on. Upon arrival, inspected unit and observed drum light also not operating. Did polarity test and there is zero voltage from both legs. Found breaker on off position. Restored power and test unit. Unit is operating as designed. Job complete"
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Elgin, TX 78621
Joe Z
Job Details: 04/23/2024
Arrived on site to install previously ordered parts. Replaced slider W10734521 and rotor W11260238. Test unit with load of laundry on agitation and spin. All remaining noises are normal for this unit during clockwise to counter clockwise movement during agitation. Unit is operating as designed. No leaks present at this time. Job complete
DM
Round Rock, Texas
04/24/2024
Joe was quick, reliable, and made the whole process easy.
Overall Experience
Lakeway, Texas
04/23/2024
Overall Experience
Charly
Austin, Texas
04/22/2024
Joe was at our door right on time, nocked at our door and identified himself very polite,I passed him in to show our dryer, in 20 to 25 he had finish fixing the job. Thanks Joe.
Overall Experience
Mike Salazar
Austin, Texas
04/18/2024
Joe Z has excellent communication skills. He quickly analyzed the problem with our washer and performed the repair quickly. Very knowledgeable and explained the issued. Thanks
Overall Experience
Mirna
Elgin, Texas
04/18/2024
Excellent service
Overall Experience