"Arrived onsite for right rear burner not functioning. Replaced element and switch. Unit is now functioning properly. Job complete. Replaced W11171119, WP3149404"

"Updated model number. Arrived on site for unit icemaker not making ice. Upon arrival inspected unit and found ice bin empty. Could not see receiver/emitter light on. Ran ice harvest test and unit did complete cycle. Ran a fill test and unit completed. Did record an E5 error in diagnostics but after power cycling unit and running the icemaker harvest test again the unit showed no error codes. Also, after power cycleHe emitter light was now registering. Customer will monitor . if symptoms persist, recommend returning with control, icemaker, emitter and receiver. No parts installed"

Arrived on site to replace failed gaskets. Replaced right and left RC gaskets. Molded gasket to fit. Tested and unit is functioning properly. Job complete Replaced gaskets W10830162 (2)

"Arrived for sparking at top of control panel. Upon arrival,inspected unit and found dispose has failed. Replaced diode W11256462. Test unit and is operas designed. Job complete"

"Arrived on site for not cooling upon arrival, inspected unit. Compressor turns on buzzes, pulls too many amps then clicks off. Need to have sealed system repair. Ordering compressor, access valve, nitrogen, and R600 kit. Office to reschedule ; ordrng 1 W11547313 (Compressor) and 1 R600kit (R600 kit) and 1 Nitrogen (Nitrogen) and 1 WPW10143759 (UV drier) and 1 W11506635 (Access valve)"