Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.
for Valley Mills, TX
Eugene - Valley Mills, TX
On time and professional. Repairs done quickly. Completely satisfied
Scotty - Valley Mills, TX
WASHER MAYTAG MVWC565FW Arrived on site for a washing machine that wont go past the wash cycle. Inspected unit and work area. Please do an in-service diagnostics and found an F0 E5 (off balance load) and F8 E1 (low/no fill) error codes. Ran the unit through an auto cycle and found the drain hose was installed too far into the PVC pipe in the back causing the unit to siphon water back in after the drain cycle was completed. Shortened drain hose to fit 6 inches into the stand pipe and tested unit. Unit is working as designed. Call complete.
OVEN WHIRLPOOL MER6600FZ2 Arrived on site for range that had issues with the door opening and closing. Inspected unit and work area. Found door bent upwards and not closing due to broken hinge and receiver. Replaced hinges and receiver and tested unit. Unit is working as designed. Call complete.
WASHER MAYTAG MVWB865GW0 "Arrived on site for washer that would not start a cycle. Inspected unit in work area. Placing it in diagnostics and found an F3 E2 (inlet waster temperature fault), F8 E1 (long/no fill), F0 E3 (overload), and F0 E4 (spin limited by water temperature). Cleared codes and tested unit in diagnostics mode. Found issue with hot water valve. Replaced inlet water regulator and tested unit. Unit worked as designed. Call complete."