Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.
for Mount Calm, TX
Katrina - Mount Calm, TX
Glen - Mount Calm, TX
On time, polite, and solved problem.
DRYER MAYTAG MEDB765FW0 "Arrived on site for a dryer that would not turn on. Inspected unit and work area. Found customers complained of unit humming when trying to start it open the door and the light came on and close the door. Attempted to run another cycle and it ran as designed. The customer and I tested the unit seven more times with clothes and without clothes and the unit is running as designed. I advise the customer since were no longer able to replicate the issue, it is advisable that we not perform any repairs until issue can be found.
DISHWASHER WHIRLPOOL WDF130PAHB0 "Arrived on site for a dishwasher that is not latching correctly. Inspected unit and work area. Customer advised that if they push the door in, they can get it to run but if they just close it normally that the unit will not start. Inspected strike and found a strike in properly installed. Re-fit strike onto proper location and tested unit. Unit is working as designed. Placed unit in diagnostics and found no stored error codes. Call complete."
DISHWASHER WHIRLPOOL WDF330PAHW2 Arrived on site to diagnose a dishwasher that was not washing the dishes properly. Upon further inspection I found that the motor and pump sump assembly head quit working and was no longer turning on the way it was supposed to it was receiving the proper voltage from the main control board so I went ahead and replace the pump and motor retest of the unit and everything is functioning as designed there were no leaks before during or after repair. Call complete
REFRIGERATOR MAYTAG MBF1958XEB6 Arrived onsite and found unit start device failed. Repaired unit charged in full. All checks good.
REFRIGERATOR WHIRLPOOL WRX986SIHZ00 Arrived onsite for customer complaint of French door refrigerator center mullion not closing properly. Found million not springing back. Removed and replaced million. Reassembled. Mullion opens and closed as designed. All water connections were dry at time of service.