Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.

How can we help? Do you need appliance repair?

Local Reviews
for Mart, TX

Appliance Express Rated 4.0 out of 5 stars based on 1 customer reviews

Map of Mart, TX

Edward




Review of Appliance Express

Jonathan was very professional courteous great personality


Jonathan M.

Jonathan M.

REFRIGERATOR WHIRLPOOL WRF767SDHZ01 Arrived on site for fridge raider that’s not cooling. Inspected unit and work area. Put gauges on the unit and found refrigerant had completely vacated the system. Put unit under a vacuum and found unit slowly leaking in air. Found hole and die dryer. Replaced air dryer and resealed system. Tested unit and unit held a vacuum. Charged unit and unit started at 125 psi on the high side and two psi on the low side and climbed up to 140 psi on the high side and 1 psi on the low side. Unit is working as designed. Call complete.

Near Lakeland Park Cir, Mart, TX 76664
Jonathan M.

Jonathan M.

REFRIGERATOR WHIRLPOOL WRF767SDHZ01 "Arrived on site to install previously diagnosed parts. Inspected unit and work area. Replaced compressor, dye dryer, and coupler and placed unit in a vacuum.Unit held in a vacuum for over seven minutes. Charged unit and pressures got to zero on the low side and 140 psi on the high side. Call complete."

Near Lakeland Park Cir, Mart, TX 76664
Jonathan M.

Jonathan M.

REFRIGERATOR WHIRLPOOL WRF767SDHZ01 Arrived on site for refrigerator that has low ice production. Inspected unit and work area. Customer advised that the issue now is that the unit is warming up in both sections. Found freezer temperatures around 33°F and refrigerator section around 50°F. Placed unit and diagnostics mowed and checked fans. All fans were running. Tested the unit and the compressor test and found the compressor not running and starting device not starting the compressor. Replaced starting device with truck stock and compressor kicked on immediately. Took amp draw and found compressor only pulling between .530 A and .570 A. Unit will need sealed system repair for for repair. Ordering parts in office will need to contact customer for reschedule date due to out of stock parts.; ordrng 1 W10913906 (coupler) and 1 WPW10143759 (dryer) and 1 WPW10466675 (compressor) and 1 WPW10608485 (evaporator)

Near Lakeland Park Cir, Mart, TX 76664
Jonathan M.

Jonathan M.

REFRIGERATOR MAYTAG MSD2542VEB00 "Arrived on site to install previously diagnosed part and check line. Inspected unit and work area Replace starting device and tested unit found a spark a long one of the wires. Condenser fan turned on but compressor did not.. ; ordrng 1 TJ90SF8404 (ACCESS VALVE) and 1 W10139462 (compressor) and 1 WPW10143759 (dryer) and 1 WPW10309395 (harns-wire)"

Near N Commerce St, Mart, TX 76664
Jonathan M.

Jonathan M.

REFRIGERATOR MAYTAG MSD2542VEB00 Arrived on site for refrigerator that’s still not cooling properly. Inspected unit and work area. Found temperature is around 80° in the fridge and freezer. Customer advised that the last repair worked for a couple days but it went right back to where it was. Spoke to CS and was advised that the issue was probably with the thermostat. Replaced thermostat and tested unit. Unit began to cool. Call complete.

Near N Commerce St, Mart, TX 76664
Jonathan M.

Jonathan M.

REFRIGERATOR MAYTAG MSD2542VEB00 "Arrived on site for refrigerator that was intermittently cooling. Inspected unit and work area. Found freezer and refrigerator at proper temperatures. Customer advised that the issue is that sometimes it’s get calls but sometimes it doesn’t and if he reset his refrigerator power, it would work again for a little while and then will just stop working. Found service pointer on said issue W10403998. It’s stated that the issue was with the adaptive defrost control and to replace it. Replaced control and unit is working as designed. Call complete."

Near N Commerce St, Mart, TX 76664
Jonathan M.

Jonathan M.

REFRIGERATOR FRIGIDAIRE FFTR2021TS0 "Arrived on site for refrigerator that was not cooling the refrigerator section. Inspected unit and work area. Found evaporator and drain hole completely frosted over. Found air baffle completely frozen over as well. Tested continuity through the heater and found it within range. Defrosted unit and replaced defrost sensor. Plugged unit ack in and unit is working as designed.

Near N Lumpkin St, Mart, TX 76664
Jonathan M.

Jonathan M.

WASHER MAYTAG MVWC465HW2 Arrived on site for washer that had a broken push to start switch. Inspected unit and work area. Found unit push to start button pushed in and not sitting properly. Removed control and found consul bent upwards not allowing the control to activate to push to start rubber button properly. Adjusted and leveled console for the control to sit properly. Placed control back on and ran unit through a diagnostics test cycle. Unit is working as designed. Call complete.

Near E Navarro St, Mart, TX 76664
Jonathan M.

Jonathan M.

WASHER WHIRLPOOL MVWX655DW1 "Arrived on site for washer that would not start a cycle after going through a fill. Inspected unit and work area. Placed unit in diagnostic mode and found an F7 E5 (shifter fault) and F8 E1 (long/no fill). Inspected unit and found no hot water connection on the hot valve. Unit was placed on a cool cycle and could not draw hot water. Turned water temperature down to tap cold and tested unit. Unit began to run a normal cycle. The unit filled, agitated, and began to fill and agitate more. I placed the unit into a manual test and was able to lock the lid. I tested the spin and agitation several times with no shifter issues. Unit worked as designed. Call complete."

Near N Goddard St, Mart, TX 76664