Need Appliance Repair Service? Have a general question?
We love solving problems! Let us know how we can help by reaching out below.
for Creedmoor, TX
Very Nice Technicians
Wanda - Creedmoor, TX
I have a 6 month old Maytag washer that was making noises. Both Technicians who came were very informative and told me what needed repair & found another small issue with the water valve I was unaware of. Of course I will call again if service is needed again. PS I bought an extended warranty as a precaution after talking to the 1st Technician. I hope that I don't have anymore problems but just in case, I'm covered. Thanks for the great service.
Great service and on time.
Marilu - Creedmoor, TX
Nice friendly service
DISHWASHER GE DDT595SSJ0SS Arrived on site to test unit for unit leaking. Test unit and found damaged tub and damaged front panel and console. Missing insulation and kick plate and cover for junction box under unit. Will also need wash motor and drain motor with clamps and gasket for sump. ; ordrng 1 NEEDSAUTHO (NEEDS AUTHO) and 1 TUB (TUB) and 6 WD01X10571 (CLAMPS )s and 1 WD01X21314 (TUB INSULATION ) and 1 WD08X21320 (GASKET ) and 1 WD18X22782 (SUMP) and 1 WD27X23178 (COVER) and 1 WD34X23198 (CONSOLE )
WASHER MAYTAG MVWB835DW4 "Arrived on job for to replace parts. Replaced gearcase, clutch and valve. Tested unit, unit test good. No leaks at this time. Job complete"
WASHER MAYTAG MVWB835DW0 Arrived on job for complaints of not washing found loose connection at pump. Reconnect and test. No leaks detected at time of service
DISHWASHER MAYTAG MDB8969SDE3 Arrived on site to test unit for cancel and start button not working. Test unit and found bad buttons on panel. Replaced panel test unit and un unit and t working correctly. No leaks present at this time job complete