Freezer Repair
Common Freezer Problems
Freezer is not cold enough or too cold - we can adjust the thermostat or evaluate the temperature control system.
Door does not seal - we will repair or replace the seals to save you money.
Freezer is noisy when running - this could be a sign of motor or compressor problems, we can diagnose and repair the issue.
Local Reviews
for Service
Powered by Fluid LOCALOur Reviews by City
Well done
Donna - New Braunfels, TX
Maytag repair fast!
Chris - Burnet, TX
Clif was courteous and knowledgable.
Andrew H.
DISHWASHER WHIRLPOOL WDF330PAHW2 "Arrived on site to test unit for not draining. Found drain connection not connected. Secured connection now drain motor is operating but not draining. Removed drain pump and found a piece of glass preventing drain pump from draining properly. Removed glass, tested unit, unit is now operating as designed. No leaks detected at time of service. Job complete."
Tommy O.
REFRIGERATOR WHIRLPOOL WRX988SIBM01 "Arrived onsite for freezer and temp not cooling correctly. Upon arrival found unit had proper voltage and polarity going into unit found compressor receiving amps correctly. Unit is not having defrost issues unit will need full sealed system as there is likely a leak. Ordering WPW10143759, W11116006, WPW10608485, 8201675.
Andrew H.
WASHER ELECTROLUX EIFLW55HMB0 "Arrived on site to test unit for small leak underneath door and off balance issues. Big piece of mulch caught in bellow preventing bellow from sealing properly. Removed mulch pice tested unit, unit works good. Put unit into max spin and unit is spinning as designed. Advised customer on load procedures and checking cleaning bellow. No leaks detected. Job complete."