We serviced a
WHIRLPOOL WASHER
Model WTW4816FW
Near Elgin, Texas 78621
Joe Z
Job Details:
10/09/2025
"Arrived on site for washer WTW4816FW for complaint of keeps draining . Upon arrival unit is unplugged . As soon as power is restored , the drain pump begins running continuously. I ran diagnostics and get error code F3-E1 pressure system failure . Need to replace control . model and serial tag is missing. Contacted claims and cannot proceed"
We serviced a
KITCHENAID RANGE
Model KSEG700ESS7
Near Bertram, Texas 78605
Brandon B
Job Details:
10/09/2025
Arrived on site to install ordered parts for a KSEG700ESS7 cooktop. Installed the cooktop w10814036 and took a picture. Customer inspected and approved. No gas leaks detected while on site.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRFF3036RZ00
Near Austin, Texas 78744
Luis
Job Details:
10/09/2025
"Arrived on site for over cooling in fresh food,no light in freezer and no ice. Found a defective light switch sticking and not fully engaging ordering a new light switch will also add sealer between gaps around damper control ; ordrng 1 W11396033 (Switch light) and 1 WPW10317076 (Main control) and 1 212643 (Sealer)"
We serviced a
WHIRLPOOL OVEN
Model WFG505M0BB0
Near Austin, Texas 78617
Brandon
Job Details:
10/09/2025
"Arrived on site to replace previously diagnosed. I replaced all screws, trim, handle, hinges, gaskets, glass door, inner glass, bracket kit, and nameplate. Unit tested good."
We serviced a
WHIRLPOOL WASHER
Model WFW9250WW01
Near Harker Heights, Texas 76548
Robert
Job Details:
10/09/2025
"WFW9250WW01 Arrived on site from previous tech to install parts. On arrival, I installed the bellow, and I was going to install the motor when I realized it was broken . I uploaded a photo ordering a new motor, and the client stated that bleach is not despenseing. I'm ordering dispenser. Office reschedule client when parts arrive. Returning parts will be needed no water leaks visible from main water supply. ; ordrng 1 WPW10399327 (Dispenser) and 1 Wpw10171902 (Motor)"
We serviced a
WHIRLPOOL WASHER
Model WTW7500GC2
Near Killeen, Texas 76542
Robert
Job Details:
10/09/2025
"WTW7500GC2 Arrived on site from previous tech to install parts. I installed gearcase,washplate,clutch, slider, screw,stator, and rotor . Then calibrated tested product is working as its designed no water leaks visible from main water supply."
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Copperas Cove, Texas 76522
Robert
Job Details:
10/09/2025
"MVW7232HW2 Arrived on site for a washer making nosies. On arrival, I verified the sounds . Further inspection, I found oil coming out the gearcase, and the suspension was worn. I'm ordering a whole rebuild of the gearcase and other parts. I ordered the suspension, stator motor, and the wash plate returning parts will be needed. I rescheduled the client for 10/14/25 . No water leaks visible from main water supply. ; ordrng 1 W11400156 (Suspension) and 1 W10915700 (Stator) and 1 W10902814 (Washplate)"
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Manor, Texas 78653
James K
Job Details:
10/09/2025
"Arrived to 2301 for unit stuck on drain mode. Upon arrival, unit was unplugged. Plugged in unit and immediately started draining. Proceeded to replace W11607637 control and made sure there are no restrictions and kinks on the pressure hose. Ran diagnostics and passed with no issues. Unit is functioning as designed. No water leaks detected at this time. Special project S153EB performed"
We serviced a
WHIRLPOOL REFRIGERATOR
Model KRFF577KPS05
Near Austin, Texas 78754
Justin
Job Details:
10/09/2025
(214 714 3441) Arrived on site for unit leaking water from top inside fridge. Inspected unit removed casing at top at where ice maker valve os located found water insid. Dried off everything turned water back on and inspected valve and all water lines could not find leak in this area. Removed ice maker tray and found heater had burned water line off at the ice maker causing the leak also burning top casing Also noticed condensation inside unit due to bottom mulion not straight. Called tech line to report finding sent over plenty of pictures. Tech line received all my information and case is being sent up to engineering for review. Received case number 21064709 job completed.
We serviced a
WHIRLPOOL FREEZER
Model WRT311FZDM02
Near Austin, Texas 78725
Luis
Job Details:
10/09/2025
"Arrived on site for not cooling correctly. Found ice ball on inlet of the evaporator, replaced the evaporator, compressor and drier,vacuumed system down unit kept vacuum recharged system to manufacture spec powered unit on checked low side pressure good checked frost pattern good. W11578004,w11580057,wpw10143759,w11506635"
We serviced a
WHIRLPOOL REFRIGERATOR
Model GS6SHAXKS02
Near Cedar Park, Texas 78613
Daniel A
Job Details:
10/09/2025
"Arrived on site to inspect refrigerator making loud noise from behind. Upon discussing the symptom with the customer, there is a chance that the sound was coming from the condenser fan. The sound is intermittent. I gained access to the rear of the unit and inspected the fan and compressor. I found that the compressor and fan were running without issue. I also verified that the evaporator fan was operating without issue. I tightened the retaining nut on the condenser fan blade and cleaned hair buildup that was wrapped around the fan motor shaft. I reassembled the unit and instructed the customer to monitor and to make a recording of the sound returns. At this time the refrigerator is operating as designed. No water leaks observed during service."
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Austin, Texas 78717
Daniel A
Job Details:
10/09/2025
"Arrived on site to install previously diagnosed and ordered part. I removed and installed the lower harness. I powered on the washer and it was able to drain, however the drain pump did not stop running and displayed F3E1. I attempted to clear the code and reset the machine and the machine would continue to drain indicating a pressure sensor error. The machine had a secondary issue with the control. I replaced the control as well. I calibrated and tested the machine and it is now operating as designed. No water leaks observed during service."
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Austin, Texas 78717
Miguel
Job Details:
10/09/2025
Arrived on sote with parts ordered. Verified model and serial. Pressure hose clear. Wiring looks good. Replaced main control. Attemoted to recalibrate but unit does not lock. Per notes apartment maintenance is going to repair door lock. Call complete. W11607637
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Austin, Texas 78729
Daniel A
Job Details:
10/09/2025
"Arrived on site to inspect washer continuously draining unless unplugged. Upon further inspection, I placed the unit into service mode and observed error code F3E1. I checked the condition of the pressure hose and found no obstructions or damage. The control has a failed pressure sensor, which is causing it to drain continuously. I replaced the control and calibrated and tested the machine. The machine is now operating as designed. No water leaks observed during service. W11608056. No on on site to sign"
We serviced a
JENN-AIR DISHWASHER
Model JDPSS244LL2
Near Austin, Texas 78757
Daniel A
Job Details:
10/09/2025
"Arrived on site to inspect dishwasher with loose handle. Upon further inspection, i found the handle and studs to be loose. I removed the outer door and tightened the handle studs. I reattached the handle and tightened the set screws. The dishwasher is operating as designed. No water leaks observed during service."
We serviced a
WHIRLPOOL RANGE
Model WFES3030RS0
Near Copperas Cove, Texas 76522
Robert
Job Details:
10/09/2025
"WFES3030RS0 Arrived on site for a range with no power. On arrival, I verified that the range tripped the breaker when preheating. I removed the ground wire and preheated to five hundred degrees temperature reached without tripping breaker. I took amp draw only oven on it was 14.77. With all burners on and oven on it was 36.78. I rewired the ground wire back on and preheated to five hundred degrees temperature reached without tripping breaker. I checked polarity and voltage readings were correct. I recommend that the client contact the breaker company for information on the correct gfci breaker. Also recommend client to contact home builder to replace the gfci breaker. Calling whirlpool safety case# 21043639"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS312SNHM08
Near Austin, Texas 78617
Luis
Job Details:
10/09/2025
Arrived to unit 4206 for no ice. Checked harness connection seated icemaker harness fully ran a harvest cycle passed icemaker filled with water.
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ3
Near Round Rock, Texas 78664
Daniel A
Job Details:
10/09/2025
Arrived on site to install previously diagnosed and ordered part per previous technician. I installed the wiring harness and reassembled the unit. I tested the unit and it is now operating as designed. No water leaks observed during service.
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Pflugerville, Texas 78660
Scott
Job Details:
10/09/2025
"Arrived on site for drain pump keeps running . Ran diagnostics, got control trol and pressure sensor errors. Model is with in SP range . Replaced control W11603811. Ran calibration and dianostics test wash. All checked normal. Nomwater leaks detected at time of service. Maintenance not on hand to sign ticket . Job complete"
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Austin, Texas 78717
Miguel
Job Details:
10/09/2025
Arrived on sote with parts ordered. Verified model and serial. Pressure hose clear. Wiring looks good. Replaced main control. Recalibrated and ran automatic test cycle. Working as designed. Call complete. W11607637
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Manor, Texas 78653
James K
Job Details:
10/09/2025
"Arrived on site for unit stuck on drain mode. Upon arrival, unit was unplugged. Plugged in unit and immediately started draining. Proceeded to replace W11603810 control and made sure there are no restrictions and kinks on the pressure hose. Ran diagnostics and passed with no issues. Unit is functioning as designed. No water leaks detected at this time. Special project S153EB performed"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRMF3636RZ00
Near Pflugerville, Texas 78660
Scott
Job Details:
10/09/2025
"Arrived on site, replaced ice bin . Transferred ice to new bucket , no signs of clumping . Double checked for any plastic pieces . All checked normal. U it is now dispensing cubed and crushed. No water leaks detected at time of service. Job complete"
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Manor, Texas 78653
James K
Job Details:
10/09/2025
"Arrived on for unit lid locked and will not complete cycle. Upon arrival, checked error codes and found F5E1 lid locked error. Cleared code. Ran diagnostics and passed with no issues. Customer stated the unit will never spin and will continually fill with water. Ran consumer cycle Quick Wash and found no issues. Suspects unit went out of balance. Explained to customer proper loading. Customer agreed. Unit is functioning as designed. No water leaks detected at this time. No parts needed"
We serviced a
WHIRLPOOL WASHER
Model WFW560CHW4
Near Georgetown, Texas 78626
David Z
Job Details:
10/09/2025
Arrived on site to diagnose washer WFW560CHW4 banging and shaking when in use. Examined unit and checked for moving bolts. Found 1 moving bolt was left in the lower left corner. I removed the moving bolt and ran the unit. I verified no water leaks and appropriate / normal vibration levels. Repair completed.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ13
Near Austin, Texas 78754
Justin
Job Details:
10/09/2025
Arrived on site for ice maker not dispensing ice. Inspected unit found coupler seized. Wad able un un seize coupler and tested unit started dispensing ice maintenance witnessed. Unit is now functioning properly and as designed to. No leaks present at this time job completed
We serviced a
WHIRLPOOL DISHWASHER
Model WDF331PAHS1
Near Liberty Hill, Texas 78642
Andrew P
Job Details:
10/09/2025
"WDF331PAHS1 removed and replaced upper and lower racks and upper and lower wheel guides racks move freely from front to back.Rand dishwasher, dishwasher, filled, washed and drained no issues.No leaks detected"
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW1
Near Austin, Texas 78754
Justin
Job Details:
10/09/2025
Arrived on site for unit making grinding noise. Inspected unit found splutch assembly not functioning properly and coming apart. Replaced splutch assembly and tested unit is no longer making noises. Unit is now functioning properly and as designed to. No leaks present at this time job completed
We serviced a
WHIRLPOOL WASHER
Model WTW4850HW3
Near Austin, Texas 78724
Justin
Job Details:
10/09/2025
Arrived on site for drain pump constantly running and unit not completing Cycle. Upon arrival inspected unit found drain pump constantly running unit will need new control. Replaced control and calibrated and tested. Unit is now functioning properly and as designed to. No leaks present at this time job completed
We serviced a
WHIRLPOOL DRYER
Model WGD4815EW4
Near Austin, Texas 78723
Justin
Job Details:
10/09/2025
Arrived on site for unit leaking gas. Inspected unit used bubbles gas leak detector to locate leake. Found leak accusing at the back of the unit at adapter and flex line. Installers did not put tephlon tape in proper are. Showed home owner leak and took pictures uploaded to SD. Leak was causes by Installers mistake. Customer will be contacting Installers to resolve issue. Job completed
We serviced a
KITCHENAID ICE MACHINE
Model KUIX535HPS01
Near Horseshoe Bay, Texas 78657
Wesley
Job Details:
10/09/2025
Arrived onsite KUIX535HPS01 and found unit would not produce because celan cap had come loose enough to drain the reservoir during the cycle. Secured cleaning cap. Observed production until ice formed on the evap. Unit fill is correct. Unit produces correctly.
We serviced a
WHIRLPOOL MICROWAVE
Model WOC54EC0HS22
Near Austin, Texas 78744
Leonardo
Job Details:
10/09/2025
Arrived on site knocked on the door no answer. Called number and spoke with home owner and she wasnt going to make it home on time. She will call back to reschedule when she ready and back in town. ; O-emld tckt
We serviced a
MAYTAG WASHER
Model MVW6230HW0
Near Georgetown, Texas 78628
Andrew P
Job Details:
10/09/2025
"MVW6230HW0. Verified F8E1 fault code in diagnostics. Ran valve test and found cold water valve not opening properly. Removed and replaced water valve assembly W11569161. Ran washing machine through auto test. All functions worked properly; it filled, agitated, and drained. No leaks detected."
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Leander, Texas 78641
Miguel
Job Details:
10/09/2025
"Arrived on site for washer making a noise. Found f0e9 flashing. This is the only code. Cleared and ran automatic test cycle. All components pass with normal sounds. Removed splutch to check for oil. No oil but a peice of plastic fell. Replaced splutch, actuator and belt. Ran automatic test cycle. Working as normal. Call complete."
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Austin, Texas 78726
Andrew R
Job Details:
10/09/2025
Arrived on WFG320M0MS0 range with damaged warmer drawer. I confirmed it was dented. I replaced the W11596150 PANL DRAER and unit now looks as designed. Call complete.
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW1
Near Kyle, Texas 78640
Brandon
Job Details:
10/09/2025
"Arrived on site to replace previously diagnosed parts. I replaced actuator, unit tested good. Parts used w10913953"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Austin, Texas 78745
Brandon
Job Details:
10/09/2025
"Arrived on site for customer complaint of of unit not draining. Found issue with lower wire harness. I replaced lower wire harness, unit tested good. Part used w11643701"
We serviced a
WHIRLPOOL OVEN
Model WFG320M0MS0
Near Mustang Ridge, Texas 78610
Leonardo
Job Details:
10/09/2025
Arrived on site to realce board previously ordered. Replaced board test unit by turning oven on and oven ignited correctly. Job complete. No leaks present at this time.
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF536RPS01
Near New Braunfels, Texas 78132
Andrey
Job Details:
10/08/2025
"Arrived on site to test unit for no ice production, tested unit found ice maker unresponsive, replaced ice maker, ice maker is now cycling but no ice box fan not engaging, inspected and found no voltage going to the fan, replaced control and tested unit is now running as designed no leaks detected job complete installed W11648802, W11753078"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW1
Near Austin, Texas 78753
Joe Z
Job Details:
10/08/2025
"Arrived on site for washer WTW5057LW1 with complaint of bad vibration. Upon arrival, ran diagnostics and there are no saved error codes. Ran automatic test cycle and completed correctly. Ran a drain and spin and cabinet is a little bouncy. Found feet are not leveled correctly and there is a piece of cardboard under right rear foot. I removed cardboard and adjusted all feet correctly. Unit is operating as designed. No leaks present. Job complete"
We serviced a
KITCHENAID OVEN
Model KOEC530PSS01
Near Manor, Texas 78653
Matthew
Job Details:
10/08/2025
"Arrived on site for oven model number KOEC530PSS01 with unit not turning on. Confirmed the unit was not operational, checked breaker box and confirmed the system had been tripped. Ran diagnostics and confirmed all components were working and let the oven heat up to 500 degrees. Instructed customer to allow the oven to idle for 1.5 hrs then shut off. Customer was also instructed to reach out to breaker company if problem persists as it might be a GFCI compatability issue. Job complete."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SMBM00
Near Austin, Texas 78754
Joe Z
Job Details:
10/08/2025
"Arrived on site for refrigerator WRF535SMBM00 with complaint of not cooling completely, refrig stays at 50, frzr at 10. Upon arrival, inspected unit and confirmed temperature issues. Found frost in freezer section liner and evaporator encased in frost. Compressor, evaporator fan and condenser fan are all operating correctly. Found freezer door not closed completely. The freezer door does not open and close smoothly. Also found rips in right side door gasket where meets mullion . Need to order all parts of freezer door slides and right side door gasket. Office to reschedule ; ordrng 1 W11658402 (Slides) and 1 W11489993 (Left rail) and 1 W11489994 (Right rail) and 1 WPW10284684 (Left bracket) and 1 WPW10284685 (Right bracket) and 1 W10830162 (Right door gasket)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRFC9636RZ00
Near Austin, Texas 78705
Luis
Job Details:
10/08/2025
"Arrived on site. Removed defective right side door,installed new door installed bins tested door operation and seal, had customer check new door. Used w11466511,w11223753"
We serviced a
WHIRLPOOL DRYER
Model WED4850HW0
Near Austin, Texas 78724
Joe Z
Job Details:
10/08/2025
"Arrived on site to apartment 1114 for dryer WED4850HW0 with complaint of not heating. Upon arrival, test unit and confirmed no heat. Ran vent test and failed. Found high limit thermostat is OL. Found build up of lint in blower housing caused the no air flow. Replaced high limit thermostat 279816 and cleared blower housing. Test unit and is operating as designed. Job complete"
We serviced a
WHIRLPOOL REFRIGERATOR
Model GZ25FSRXYY2
Near Austin, Texas 78726
Miguel
Job Details:
10/08/2025
Arrived on site for door still not closing. Found the previous part still good. But door is just barely touching the switch. Switch is working as designed. Added a spacer to bottom so top can make better contact. Advised customer i can put a pad where switch hits for better contact. Customer agreed. Now making good contact. Call complete.
We serviced a
MAYTAG DRYER
Model MEDC465HW0
Near Round Rock, Texas 78664
Wesley
Job Details:
10/08/2025
Arrived onsite MEDC465HW0 for not heating. Found heater burnt. Fuses good. Replaced the heating element 279838. Recommended that the duct be cleaned to improve airflow. Unit is now operating as designed.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRFF3436RW00
Near Austin, Texas 78730
James K
Job Details:
10/08/2025
"Arrived on site for first buildup on top section of FC. Upon arrival, found frozen sheet of ice near FC door switch. Proceeded to inspect door and found door leaning forward. Adjusted top of hanger rails and tested and now unit is functioning as designed. No water leaks detected at this time. No parts needed."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ2
Near Georgetown, Texas 78628
Brandon B
Job Details:
10/08/2025
Arrived on site for a WDT750SAKZ2 dishwasher not starting. Found the console unresponsive with a 'P' on it. I unplugged it for 5 minutes 2 times. Since the UI was replaced already i replaced ed the control w11672039 but got the same results. I replaced the UI w11632709 and now it's working as designed. No water stains in the door and no leaks detected while on site
We serviced a
KITCHENAID MICROWAVE
Model KBMS1454BSS0
Near Austin, Texas 78732
James K
Job Details:
10/08/2025
"Arrived on site for unit not heating shutting after couple seconds of use. Upon arrival, found clicking noises when unit is running and will shut off after couple of seconds. Timer does not reset. No sparking of electrical shocks presents. Upon closer inspection, proceeded to press down on secondary switch and found little bit of end play with a slight resistance when pressing down. Ordering W11238401 transformer, 461964654691 capacitor, W11684510 support, WP8205683 interlock holder and W10211972 switches (4). No parts replaced. Office to reschedule ; ordrng 1 461964654691 (Capacitor) and 1 W11238401 (Transformer) and 1 W11684510 (Support) and 1 WP8205683 (Interlock holder) and 4 W10211972 (Switches)s"
We serviced a
WHIRLPOOL WASHER
Model WFW560CHW4
Near Austin, Texas 78724
Joe Z
Job Details:
10/08/2025
"Arrived on site to apartment 8108 for complaint of Leaking through the front door seal. Upon arrival inspected unit. Am seeing evidence of water marks below door running down front panel. I inspected bellow and is good with no rips. Ran a normal wash cycle and there are no leaks. I observed the usual water that forms between door and seal and is sealed in correctly. Found that the normal water that splashes on door drizzles down to bottom of door and does not leak until door is open causing dripping to floor. Tenant states that when she reported leak there was a huge puddle. After series of questions, I believe too much detergent was being used. Tenant also states that when clean cycle was performed that water leaked from under door. I ran a clean washer cycle and also cannot duplicate a leak. The unit is operating as designed. No leaks present. Job complete"
We serviced a
WHIRLPOOL DISHWASHER
Model KDTE204KPS1
Near Leander, Texas 78645
Brandon B
Job Details:
10/08/2025
Arrived on site for a KDTE204KPS1 dishwasher door falling open. I found the right spring had come loose due to the insulation getting caught on it. I corrected it and now the door opens as designed. No leaks detected while on site
We serviced a
WHIRLPOOL REFRIGERATOR
Model KRFC136RPS00
Near Jonestown, Texas 78645
Brandon B
Job Details:
10/08/2025
Arrived on site for a KRFC136RPS00 refrigerator door not closing right. I found the left door wouldn't stay open. I inspected the hinges and found washers installed wrong. I corrected the issue and the doors are operating as designed. No leaks detected while on site
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Woodway, Texas 76712
Jonathan M
Job Details:
10/08/2025
"Arrived on site for washing machine model NTW4519JW2 that will fill and drain but will not complete cycles. Inspected unit and work area. Customer advised that the machine has not worked properly since the previous visit. Gained access to the control and found the pressure hose had become disconnected from the control. Re-seated the hose onto the control and tested the unit on a quick wash. Found the unit filled and then began agitating without adding more water, indicating a proper fix. The unit is now working and operating as designed with no leaks present during service. Call complete. No parts were installed."
We serviced a
WHIRLPOOL DRYER
Model WED6150PB0
Near Georgetown, Texas 78633
David Z
Job Details:
10/08/2025
"Arrived on site for follow-up on door issues with electric dryer WED6150PB0. Examined the door and discussed with customer, whose main concern was difficulty opening and closing it. Applied grease and made slight adjustment to the strike to reduce resistance. Demonstrated no damage or warping on the panel; explained right-side hinge positions it closer to front panel, causing minor left-side protrusion. Performed minor adjustments, verified customer understanding and satisfaction. Repair completed; no parts needed."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Waco, Texas 76705
Jonathan M
Job Details:
10/08/2025
"Arrived on-site for a washing machine model WTW4816FW3 to install previously diagnosed parts. Inspected unit and the work area. I replaced the main control W11603810 and tested the unit. I found the machine fill, drain, agitate, and spin as designed with no leaks present during service. Call complete."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT112CZJZ01
Near Hutto, Texas 78634
Lou
Job Details:
10/08/2025
"Arrived on site to install previously diagnosed and ordered part. Per previous techs diagnosis, I removed and replaced the RC door and tested operations. The unit is operating as designed, and the door is sealing properly on all four sides. No water connections to the unit, job completed. W11374241"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRMF3636RW00
Near Pflugerville, Texas 78660
Wesley
Job Details:
10/08/2025
Arrived onsite for icecontainer getting stuck and motor not dispensing. Tim sr#21053709. Customer is not able to remove the ice bin reliably for normal maintenance because of the difficult release and their age. All other checks indicate properly functioning unit with good shape and gasekt alignment and observed customer video evidence that indicates the ice maker is not overproducing passed the fill arm. No repair recommendations. Customer satisfaction concerns logged with tech support. Advised customer to pursue non repair resolution with customer care because the product is operating within design parameters though it is not best suited to customer needs.
We serviced a
WHIRLPOOL OVEN
Model RF368LXMQ0
Near Killeen, Texas 76543
Robert
Job Details:
10/08/2025
"RF368LXMQ0 Arrived on site from previous tech to install parts. On arrival, the client stated that the front right was the only issue. I replaced the front right switch then tested product is working as its designed."
We serviced a
WHIRLPOOL WASHER
Model WTW4850HW3
Near Austin, Texas 78758
Wesley
Job Details:
10/08/2025
Arrived onsite WTW4850HW3 to unit 4031 and found unit operating with failed control. F3e1 error code. Replaced control w11607637 which corrected the continuous drain symtpom. Calibrated. Advised maintenance on the repair.
We serviced a
KITCHENAID RANGE
Model KFEG500EBS6
Near Killeen, Texas 76549
Robert
Job Details:
10/08/2025
"KFEG500EBS6 Arrived on site for a range with display issues. On arrival, I verified the switch memb has failed and needs to be replaced . Also, the control board power will need to be replaced. Part was ordered but didn't arrive on time of service. I rescheduled the client for the next available date 10/13/25 client would like the same tech to come out and the morning time frame if possible. Returning parts will be needed. ; schdld next appmnt for 10/13 MON !"
We serviced a
WHIRLPOOL REFRIGERATOR
Model KBFN502ESS05
Near Austin, Texas 78759
Wesley
Job Details:
10/08/2025
"Arrived onsite for KBFN502ESS05 for complaint of noisy boing sound during left fridge door open, close. Found the square key on the cam had play on the corresponding square peg and under tension it would hop from one friction point to the opposite while opening or closing and the sudden shift would cause the spring to vibrate with a boing. Replaced left hand extension WPW10121046 and doubled the square peg sleeve spacer to provide sufficient friction in the fitting and eliminate the noisy play. Noise eliminated. Unit is now operating as designed."
We serviced a
MAYTAG DISHWASHER
Model MDB4949SHZ1
Near Killeen, Texas 76549
Robert
Job Details:
10/08/2025
"MDB4949SHZ1 Arrived on site for a dishwasher, not washing dishes. On arrival, I verified the motor has failed and the top rack wheels have failed. I ordered 4 wheels and rescheduled the client for 10/13/25. Returning parts will be needed no water leaks visible from main water supply. ; ordrng 4 WPW10571738 (Wheel)s"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Kyle, Texas 78640
Brandon
Job Details:
10/08/2025
"Arrived on site to replace control under S153EB. I replaced control, calibrated and tested, unitntested good. Part used w11603810"
We serviced a
WHIRLPOOL OVEN
Model WEG745H0LZ5
Near Kyle, Texas 78640
Brandon
Job Details:
10/08/2025
"Arrived on site for customer complaint of unit giving error codes, found f2e0 error code, I removed console, found ribbon disconnected, I connected ribbon, unit tested good."
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Kyle, Texas 78640
Brandon
Job Details:
10/08/2025
"Arrived on site for customer complaint of squealing noise, found issue with belt, actuator and splutch. I replaced parts, unit tested good. Parts used w10721967, w11239857, and w11481722"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ00
Near Hutto, Texas 78634
Lou
Job Details:
10/08/2025
"Arrived on site to inspect refrigerator WRS555SIHZ00 ice maker not working. Upon further inspection, I tested temps in the FC=4 degrees. I removed the ice maker housing and found the ice maker tray full of ice and damaged. I removed and replaced the ice maker and tested it, and it is operating as designed. I found ice forming on the underside of the ice bin and cleared it for the customer. I made recommendations for use and care as the unit is operating as designed, and no water leaks were observed during service. Job completed. W10873791"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS07
Near Belton, Texas 76513
Tyler
Job Details:
10/08/2025
"Arrived on site for refrigerator not making ice or dispensing water. On arrival, I confirmed failure but found duvalve, working as designed. I then found the isolation valve is only getting sixty out of the hundred and twenty volts needed, and I found the condenser fan harness has a bad diode.It's leading to the isolation valve. I was able to get a hundred and twenty volts on one side of the diode, but not the other. Im ordering W11440595 condenser harness, office to reschedule with customer.Once availability of part is known.; ordrng 1 W11440595 (Condenser harness)"
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW3
Near Hutto, Texas 78634
Lou
Job Details:
10/08/2025
"Arrived on site to inspect washer WTW5000DW3 getting off balanced. Upon further inspection, I pushed down on the tub assembly, and when I let go of the tub, it bounced back up, and instead of coming straight up, it bounced around. I inspected the suspension rods and found the back left badly bent. I placed the unit in diagnostics showing no error codes and tested and found that when the unit goes into spin mode, it begins to make a loud metal grinding noise. I tilted the unit back and found gearcase oil on the cam pulley. I removed and replaced the gearcase, cam, belt, and suspension rods and calibrated the unit. Retested the unit, and it is operating as designed. No water leaks observed during service, job completed. W11130362, W11454734, W11239857, W10721967"
We serviced a
WHIRLPOOL FREEZER
Model WRX986SIHV03
Near Round Rock, Texas 78665
Andrew P
Job Details:
10/08/2025
Refrigerator WRX986SIHV03: Removed and replaced heater assembly for ice maker W110872 Advised customer to give 24 hours to fill ice bucket completely. No leaks detected during service.W11087201
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near New Braunfels, Texas 78130
Andrey
Job Details:
10/08/2025
"Arrived on site to test unit for not working properly, tested unit found just a humming noise coming from the motor when trying to agitate, tested and found failed capacitor, replaced and tested unit is now running as designed no leaks detected job complete installed W11395618"
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Hutto, Texas 78634
Lou
Job Details:
10/08/2025
"Arrived on site to inspect washer drain pump constantly on. Upon further inspection, I placed the unit in diagnostics showing error code F3E1-pressure sensor fault. Following Service Pointer W11766193, I removed and replaced the main control and calibrated the unit. Tested in diagnostics, and the unit is operating as designed. No water leaks observed during service, job completed. W11607637 No one available to sign for receipt."
We serviced a
WHIRLPOOL DRYER
Model WED500CMW0
Near Round Rock, Texas 78665
Andrew P
Job Details:
10/08/2025
"Electric dryer model WED500CMW0. Verified noise from dryer, coming from the rear; sounded like the blower wheel was rubbing. Removed back panel and blower wheel cover. Found blower housing slightly bent inwards, causing it to rub on blower wheel. Straightened blower housing, reinstalled cover, ran dryerno unusual noises or rubbing. Dryer working as intended."
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Round Rock, Texas 78665
Andrew P
Job Details:
10/08/2025
"MVW7230HW1. Customer stated washer was making a loud noise, sounding like it was taking off during agitation. Ran washer with four or five towels to test under load; heard creaking noise like suspension rods or bushings. No noise from gear case, clicking, or grinding detected. Ordering suspension rods w11187091 and agitator cap w11246846. No leaks detected during service; ordrng 1 W11187091 (Suspension) and 1 W11246846 (Cap)"
We serviced a
WHIRLPOOL COOKTOP
Model WCE55US6HB00
Near Marion, Texas 78124
Andrey
Job Details:
10/08/2025
"Arrived on site to replace previously diagnosed element and switch, replaced and tested unit is now running as designed job complete installed W11047722, W11162115"
We serviced a
WHIRLPOOL DRYER
Model WED5620HW2
Near Temple, Texas 76504
Jonathan M
Job Details:
10/08/2025
"Arrived on site to install previously diagnosed parts on a dryer model WED5620HW2. Inspected unit and work area. I replaced the Washer W11236646, roller shaft WPW10359272, and nut WPW10080190. I reassembled the unit and ran a timed dry cycle. I found the unit working and operating as designed with no abnormal sounds present. Call complete."
We serviced a
WHIRLPOOL VENTHOOD
Model UVL6036JSS2
Near Leander, Texas 78641
Brandon B
Job Details:
10/08/2025
Arrived on site for a UVL6036JSS2 venthood lights not working on low. Found the lights were flickering on low. I replaced all 4 lights. Lights are working as designed now. Nobody is available to sign
We serviced a
KITCHENAID RANGE
Model KCGC506JSS00
Near Leander, Texas 78641
Brandon B
Job Details:
10/08/2025
Arrived on site for a KCGC506JSS00 range burner not lighting. Found all burners working but the burner misaligned. I corrected it and now it's working as designed. Nobody is available to sign
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ13
Near Seguin, Texas 78155
Andrey
Job Details:
10/08/2025
"Arrived on site to test unit for broken door switch, tested unit found broken RC switch, replaced and tested unit is now running as designed no leaks detected job complete installed W11384469"
We serviced a
WHIRLPOOL WASHER
Model WFW5605MC1
Near Seguin, Texas 78155
Andrey
Job Details:
10/08/2025
"Arrived on site to test unit for no power, tested unit found good incoming voltage, inspected u it and found failed control board, replaced control and tested unit is now running as designed no leaks detected job complete installed W11680389"
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS
Near Round Rock, Texas 78665
Andrew P
Job Details:
10/08/2025
"Gas cooking appliance WFG320M0MS. Verified F3E0 fault code, indicating temperature sensor issue. Replaced temperature sensor w11465032 but issue persisted. Replaced control board w11620481 Ran oven and oven heated fine with no fault codes. Oven working as intended. Advised customer to run oven to 350 for about 20 minutes to do a burning off b3fore cooking advised customer to turning microwave vent and that oven will produce a smell which is normal during burn off."
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW1
Near Liberty Hill, Texas 78642
Brandon B
Job Details:
10/08/2025
Arrived on site for a washer WTW5010LW1 not cycling. Found it wasn't agitating or spinning. I checked the capacitor and it's bad. No gear oil or leaks detected. I replaced the capacitor w11395618 and tested in quick wash. Unit is operating as designed now
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ06
Near Round Rock, Texas 78665
Andrew P
Job Details:
10/08/2025
"Refrigerator WRS588FIHZ06. Customer stated that the refrigerator was tripping the breaker. The breaker for the refrigerator is on a GFCI, which it really shouldn't be. Plugged the refrigerator into a different outlet, and it came on, ran, and did not trip the breaker. Advised customer to contact their builder, as there is an issue with either that outlet or the breaker itself. Builder should come out and change out both the breaker and the outlet. No water leaks at time of service"
We serviced a
JENN-AIR REFRIGERATOR
Model JFFCC72EHL03
Near Belton, Texas 76513
Jonathan M
Job Details:
10/08/2025
"Arrived on site to install previously diagnosed parts on a refrigerator model JFFCC72EHL03. Inspected unit and work area. I replaced the main control W11664342 and tested the unit. I still found that the ice dispenser motor would not turn on. I replaced the left-hand refrigerator door W11610988 and tested the unit. The unit began to work and operate as designed, dispensing water and ice with no leaks present during service. Call complete."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM08
Near Belton, Texas 76513
Jonathan M
Job Details:
10/08/2025
Arrived on site to install previously diagnosed parts on a refrigerator model WRS315SDHM08. Inspected unit and work area. I replaced the ice maker W11700250 and tested the unit. The unit began to work and operate as designed with no leaks present during operation. Call complete.
We serviced a
MAYTAG WASHER
Model MVW6200KW2
Near Belton, Texas 76513
Tyler
Job Details:
10/08/2025
"Arrived on-site for washing machine, not starting as well as had a broken latch and lock and making noises. On arrival, I found the suspension rods allow a unit to touch the floor with barely any effort pushing down on the unit. W11396716 suspension Rods. I also confirmed latch and strike.Both broken and control board were showing f three e one in diagnostics. I replaced w 11556725 control, and w11700916 latch and w1145781 strike. Found the unit was also off balance, and something had gotten stuck out of the unit and was hitting the cam, which is what caused the noise. I'm ordering suspension, rods and rescheduled customer for 10.13.25; ordrng 1 W11396716 (Rods)"
We serviced a
WHIRLPOOL WASHER
Model WTW57ESVW1
Near Buda, Texas 78610
Brandon
Job Details:
10/08/2025
"Arrived on site for customer complaint of unit not advancing through the cycle. Found multiple issues. Found brake drive gunked up and stuck, found unit would over fill and leak due to pressure switch and hose, found timer sending power to valve and agitator at the same time so it was agitating and filling at the same time. Ordier pressure switch, pressure hose, brake drive, valve, and timer. Returning tech to replace brake drive, pressure switch, pressure hose and test. If washer continues to fill and agitate at the same time replace timer and valve. ; ordrng 1 W10820043 (Brake drive) and 1 W10248240 (Pressure switch) and 1 WP353244 (Pressure hose)"
We serviced a
WHIRLPOOL WASHER
Model WTW5020SW0
Near Austin, Texas 78748
Brandon
Job Details:
10/08/2025
Arrived on site for customer complaint of unit not putting a lot of water on top of clothes. I found no error codes and unit passed diagnostic test cycle. I asked customer to video the problem if it happens again. Unit is working as designed at time of service.
We serviced a
KITCHENAID OVEN
Model KOSE500ESS00
Near Austin, Texas 78739
Brandon
Job Details:
10/08/2025
"Arrived on site for customer complaint of unit not working after power surge/outage. I flipped breaker, unit tested good."
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Austin, Texas 78744
Joe Z
Job Details:
10/08/2025
Arrived on site for washer WTW4855HW3 to install previously ordered part. Replaced valve W11038689. Test unit and is operating as designed. No leaks present. Job complete
We serviced a
WHIRLPOOL OVEN
Model WFES3330RS0
Near Nolanville, Texas 76559
Tyler
Job Details:
10/08/2025
Arrived on site for range not turning on. On arrival confirmed the issue and found control board w 11182108 bad. Replaced it and test it up into five hundred degrees and found unit working as design without trip and breaker.Call complete.
We serviced a
WHIRLPOOL DRYER
Model WET4027HW2
Near Austin, Texas 78741
Joe Z
Job Details:
10/08/2025
"Arrived on site to apartment 1418 to install previously ordered parts. Upon arrival, during disassembly found motor had wire disconnected . Secured connection and test unit. Unit is operating as designed . No parts installed this visit. Job complete"
We serviced a
MAYTAG REFRIGERATOR
Model MFI2570FEZ13
Near Belton, Texas 76513
Tyler
Job Details:
10/08/2025
"Arrived on site for refrigerator not making eyes.Properly and making a loud noise when ice was being made. On the arrival found the heater of the ice maker, not working and the valve, making an awful noise when water tried to pass through. I replaced w 1158535 valve and w 11548540ice maker and tested unit. Found no leaks and refrigerator working as design call comple."
We serviced a
WHIRLPOOL OVEN
Model WOED3030LS01
Near Salado, Texas 76571
Tyler
Job Details:
10/08/2025
"Arrived on site for wall oven, not turning on. On arrival confirmed issue and found it's w 11649137 control bad and not allowing any power to the ui. Replace control and tested both ovens 25 hundred degrees and found it working as designed without triping breaker, call complete."
We serviced a
WHIRLPOOL REFRIGERATOR
Model KSSS48QDX05
Near Austin, Texas 78750
Miguel
Job Details:
10/08/2025
Arrived on site for refrigerator not cooling. Temps are 43 and 50. Removed back cover and found refrigerator not cooling properly. Found incomplete frost pattern. No evidence of dye on evaporator. All sealed system parts were changed last year. Does not appear to still be in warranty. Advised customer i will contact management and have them call him about resolution. ; O-emld tckt
We serviced a
JENN-AIR REFRIGERATOR
Model JFFCC72EHL04
Near Austin, Texas 78735
Luis
Job Details:
10/08/2025
"Arrived on site for filter issues. Found water filter stuck,adjusted housing and forced filter out,installed new filter customer provided filter,slid in and locked correctly, tested filter install and removal multiple times no issues unit working as designed."
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Austin, Texas 78749
Brandon
Job Details:
10/08/2025
"Arrived on site for customer complaint of unit not advancing. Found error code f4e3, found issue with wash motor assembly. I replaced sump assembly, unit tested good. Part used w11613479"
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Leander, Texas 78641
Miguel
Job Details:
10/08/2025
Arrived on site for washer agitating before it is full. Ran diagnostics and found no errors. Ran automatic test cycle and all components pass. Advised that the tub does not fill all at once. It will seem empty agitate to sense then fill with more water as needed. Unit is operating as designed. Call complete. No parts.
We serviced a
KITCHENAID ICE MACHINE
Model KUIX335HPS01
Near Austin, Texas 78734
Luis
Job Details:
10/08/2025
"Arrived on site for no ice. Powered unit on 'on/off' icon blinking indicated a defective bin thermister,replaced bin thermister ran diagnosed pump shutting off water fill early,replaced pump,ran diagnostic all test passed ran a normal cycle unit working as designed. Used w11542867,wpw10511923"
We serviced a
WHIRLPOOL OVEN
Model WOES3030LS01
Near Leander, Texas 78641
Miguel
Job Details:
10/08/2025
"Arrived on site for oven tripping breaker still. Confirmed unit has a gfci breaker. Incoming voltage at 248, 124 each side to C and G. C-G=0. Removed back panel. No shorts in wiring. Replaced bake and broil elements. Reset power and tested. Bake pulls 12 amps. Broil pulls 16 amps. Preheated unit to 500 working as designed. Call complete. Called tech line file#21060694"
We serviced a
MAYTAG WASHER
Model MVW7232HC2
Near Spicewood, Texas 78669
James K
Job Details:
10/08/2025
"Arrived on site for unit display glitching when customer checks Maytag app. Upon arrival, customer stated sometimes the machine will shut off when using the Maytag app. When using machine manually, unit works as designed. There was no errors or indications that the UI and control board is faulty. Found unbalanced error on stored history due to unit not being leveled. Leveled unit. Ran DLMS calibration and factory reset. Advised customer to call Maytag tech support if issue occurs again. Customer agreed. Unit is functioning as designed. No water leaks detected at this time. No parts replaced"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF332PAMS0
Near Leander, Texas 78641
Miguel
Job Details:
10/08/2025
Arrived on site for dishwasher not draining. Found tub full of water. Activated drain pump and it just hums. Showing f6e4 in diagnostics. Float open cause its full of water. Used shop vac to collect water. Replaced drain pump. Ran automatic test cycle. Unit now working as designed. Call complete. W10876537

