Near Horseshoe Bay, TX 78657
Thomas L.
Job Details:
12/11/2018
ICE MACHINE KITCHENAID KUIX505ESS2
Arrived on site for no ice conditions. Found that the X ternal drain pump outlet failed therefore allowing no power to power up ice machine. Replaced pump. Unit tested properly with no leaks.
Near Belton, TX 76513
Al
Job Details:
12/11/2018
OVEN WHIRLPOOL WOC75EC7HS00
Arrived to install previously ordered parts. AB and I removed and replaced the UI and Blower. We reassembled the unit and tested. Unit tested as designed.JOB COMPLETE
Near Round Rock, TX 78665
Wesley
Job Details:
12/11/2018
MICROWAVE WHIRLPOOL AMV2307PFS
Arrived on site and replaced interlocks/switches for flickering and replaced control for intermittent no response and fan on.
Near Austin, TX 78745
Kevin
Job Details:
12/11/2018
RANGE JENN-AIR JGR8885RDP
"Arrived on site and control panel/board is unresponsive, no cycles can be selected. Will need to bring back a new control board in order to correct issue and confirm it will enter a bake cycle on the next visit; ordrng 1 WP8507P351-60 (cntrl-elec)"
Near Temple, TX 76504
Al
Job Details:
12/11/2018
DISHWASHER KITCHENAID KDTM404ESS3
Arrived to install previously ordered panel SS door. Removed and replaced the door. Job Complete
Near Pflugerville, TX 78660
Jonathan S
Job Details:
12/11/2018
DRYER WHIRLPOOL WED5000DW2
Arrived on site for dryer not heating. Performed diagnostics and tested voltage to dryer and found not getting 120 volts from L2. Tested all other components and no issues found. Customer will need to contact electrician. All else checks good.
Near Austin, TX 78749
Leonardo
Job Details:
12/11/2018
RANGE KITCHENAID KSIB900ESS2
Arrived on site to replace cooktop. Replaced cooktop test unit and unit test good no damaged found on new cooktop job complete
Near Leander, TX 78641
James
Job Details:
12/11/2018
DRYER WHIRLPOOL WED8000BW0
Arrived on site and tested operation. Found rollers are worn and causing the thumping noise. Installed new roller kit and vacuumed all lint from unit. Tested operation and found unit working properly.
Near Leander, TX 78641
James
Job Details:
12/11/2018
MICROWAVE WHIRLPOOL WMH32519HZ3
Arrived on site and tested unit. Found blower running and venting properly. Instructed customer that the blower in unit is a 300 cfm blower and will remove the steam and smoke that flow into it but will not pull it to the intake. Unit working as designed. Job complete
Near Leander, TX 78641
James
Job Details:
12/11/2018
COOKTOP WHIRLPOOL G7CE3635XS01
Arrived on site and found no operation from all burners. Checked for voltage and found none. Found the breaker to cooktop off. Turned breaker on and tested operation. Unit tests good job complete
Near Round Rock, TX 78665
Wesley
Job Details:
12/11/2018
RANGE AMANA AGR5330BAB3
Arrived on site and tested flame and adjusted low setting for better simmer on 3 burners. Also verified oven function and temp to be accurate. All checks good.
Near Cedar Park, TX 78613
Lou
Job Details:
12/11/2018
COOKTOP WHIRLPOOL WCG97US6HS00
"arrived on site to inspect stains on a cooktop. Upon further inspection, I found that the cooktop around the middle burner was discolored due to possible spillage. When I tested the burner, the burner did not ignite immediately as it should. I attempted to clean the burner head and tried turning it on again and it did the same thing. I tested the other burners and all worked except for the right rear. The Ignitor was arching and there was gas coming out of the unit but it would not ignite. I turned the burner cap several times and adjusted it and still no ignition. I checked the burner head as it is clean. The customer advised that she has not used that burner because it doesn’t ignite. I am ordering the middle burner head and burner caps. I scheduled return service for 12/17/18 per request. No gas leaks detected during service.; ordrng 1 W10811599 (burnr-head) and 1 W10819916 (cap-burner)"
Near Round Rock, TX 78664
Wesley
Job Details:
12/11/2018
OVEN IKEA YIEL730CS0
Arrived on site and replaced blower to repair from failed sensor. Unit now operating as designed.
Near Austin, TX 78741
Kevin
Job Details:
12/11/2018
DRYER WHIRLPOOL WED5000DW2
"Arrived on site and found door will pop open when closed, replaced catch and it did not correct issue. Will need to bring back panels and hinges to correct issue; ordrng 1 279443 (panel) and 1 WP695737 (door) and 1 WP8066056 (hinge-door) and 1 WP8066057 (hinge-door)"
Near Round Rock, TX 78664
Wesley
Job Details:
12/11/2018
OVEN JENN-AIR JJW2427DS00
Arrived onsite and installed new panel. Unit is now operating as designed. All checks good.
Near Pflugerville, TX 78660
Wesley
Job Details:
12/11/2018
DISHWASHER WHIRLPOOL WDT710PAHZ1
Arrived on site and found slow fill. Replaced valve. Unchanged symptom. Tested water pressure and found %10 flow. Advised plumber will be needed to fix pressure problem.
Near Austin, TX 78734
Brandon
Job Details:
12/11/2018
DISHWASHER KITCHENAID KUDS30FXSS9
"Arrived on site for customer complaint of unit not washing properly, found debris in upper spinner/spray arm as well as the impeller. Ordering spinner and impeller. Returning tech to replace impeller and spray arm first before the sump. ; ordrng 1 8193951A (impeller) and 1 8193983 (spinner 3rd level) and 1 CNOTE (OFFICE TO RESCHEDULE )"
Near Austin, TX 78749
Leonardo
Job Details:
12/11/2018
MICROWAVE KITCHENAID KEMS309BSS00
"Arrived on site to test unit for oven not getting passed 380 when set at 400. Test unit and found bulletin about replacing board. Replaced board , test unit and unit getting to 400 then set unit to 425 and unit getting to 425. Unit test good job complete
Near Austin, TX 78730
Paul
Job Details:
12/11/2018
DISHWASHER WHIRLPOOL WDF330PAHB0
Arrived onsite for the dishwasher not working. I found an F5E2 stored error code. The latch checked good. I found the unit filling but the pump not running. I found 118VAC from the control to the pump. I found the molex connector at the pump loose and not snapped in. I corrected the connector and tested the unit in diagnostics. The unit completed the cycle and is working as designed. There were no water leaks present at the time of service. Call complete.
Near Austin, TX 78726
Paul
Job Details:
12/11/2018
REFRIGERATOR WHIRLPOOL WRS315SNHM00
Arrived onsite for the refrigerator not cooling in either compartment. I found the FC at 27 degrees when I arrived. The unit cycled on as soon as I opened the door. I found the control set on the warmest setting. I changed the control to the recommended setting and watched the temp in the FC get to 5 degrees and the sealed system components were still running when I closed the ticket. I explained to mr how to adjust the dampener and advised leaving the unit set on the recommended setting. The unit is working as designed. The unit is not connected to a water supply. Call complete.
Near Marble Falls, TX 78654
Thomas L.
Job Details:
12/11/2018
DISHWASHER KITCHENAID KDTE104ESS1
Arrived on site for poor wash results. Tested unit and found that the main wash motor has power to it but it will not run. We will order and replace main wash pump motor. ordrng 1 WPW10605057 (pump and motor assy)
Near Austin, TX 78704
Scott
Job Details:
12/11/2018
DRYER WHIRLPOOL MED3500FW1
Arrived on site for dryer turning but not heating . Found highlimit thermostat blown . Replaced thermostat . Did recomend having maintenance take a look at venting and outlet . No lint build up at time of service job complete .
Near New Braunfels, TX 78132
Robert
Job Details:
12/11/2018
DRYER MAYTAG MEDB765FW0
Arrived on job to replace thermistor. After replacement of part ran test cycle. Operation normal
Near Canyon Lake, TX 78133
Robert
Job Details:
12/11/2018
REFRIGERATOR KITCHENAID KRFC302ESS
Arrived on job for complaints of ice maker leaks. Confirmed mold not holding water. Replaced icemaker and it filled with no leaks.
Near Canyon Lake, TX 78133
Robert
Job Details:
12/11/2018
OVEN WHIRLPOOL WOS97ES0ES02
Arrived on job to replace convection fan . After replacement test noise level normal.
Near Canyon Lake, TX 78132
Robert
Job Details:
12/11/2018
RANGE WHIRLPOOL WFE525S0HS1
Arrived on job for to replace outer door. After replacement test operation.
Near Austin, TX 78757
Scott
Job Details:
12/11/2018
DISHWASHER KITCHENAID KDTM354DSS4
"Arrived on site , replaced dispenser. Ran test cycle ,no water leaks detected at time of service . Job complete ."
Near Belton, TX 76513
Al
Job Details:
12/11/2018
DISHWASHER KITCHENAID KDPE234GPS0
"Arrived to install panel. Customer informed me the outer door had a dent and needed to be replaced, not the control panel. I ordered W11157407 SS outer door for customer. Needs more work; ordrng 1 W11157407 (SS PANEL )"
Near Austin, TX 78731
Scott
Job Details:
12/11/2018
MICROWAVE KITCHENAID KOCE500ESS05
"Arrived on site , replaced micro switches and control panel UI. Tested unit and all checked good . Job complete ."
Near Austin, TX 78731
Scott
Job Details:
12/11/2018
DRYER MAYTAG MGDB765FW0
"Arrived on site for lint building up around unit . Found cover over blower wheel was missing screws , allowing big gaps . Replaced missing screws . Cleaned out lint , no lint build up at time of service . Job complete"
Near Pflugerville, TX 78660
Jonathan S
Job Details:
12/11/2018
REFRIGERATOR WHIRLPOOL KRSF505ESS01
Arrived on site to install previous diagnosed parts. Gained access to ice door and installed new. Gained access to bracket and found part is not replaceable. Found insulation stick out between ice door and chute and not allowing ice door to seal. Will need to replace door to complete repair. Please allow 6 to 8 weeks for door to arrive. Office to schedule appointment when ETA is available. Advised cu to keep ice maker turned off until repair is made. ; ordrng 1 LW10755680 (FC DOOR STAINLESS DOOR ) and 1 SEENOTE (SEE NOTE)
Near New Braunfels, TX 78130
Robert
Job Details:
12/11/2018
WASHER AMANA NFW7600XW00
Arrived on job to replace motor control. After replacement test washer cycle.
Near Austin, TX 78759
Scott
Job Details:
12/11/2018
DISHWASHER KITCHENAID KDTM354EBS3
"arrived on site for failed wash motor again. Went thru all checks with tech line Sr 7723654193 , tech line is passing it over to engineering, customer resolution section. No water leaks detected time of service. Job complete"
Near Leander, TX 78641
James
Job Details:
12/11/2018
RANGE WHIRLPOOL WCG51US0DS00
Arrived on site and tested operation. Found both front burners have irregular flames. Found cause to be the burner head. Installed new burner heads and tested. Unit working properly. Job complete
Near Round Rock, TX 78665
Wesley
Job Details:
12/11/2018
RANGE WHIRLPOOL WFG745H0FS1
Arrived on site and found customer concerned bout marking on knobs peeling off. Ordering 5 knobs and shipping d2c. ; ordrng 1 D2C and 5 W11122880 (knob)s
Near Round Rock, TX 78664
Jonathan S
Job Details:
12/11/2018
REFRIGERATOR WHIRLPOOL WRX735SDHZ00
"Arrived on site for refrigerator making intermittently noises. Performed diagnostics mode and tested every moving components. Gained access to compressor and condenser fan. Inspected fan and tested in high speed. Inspected drain tube. Ice maker cycled while serving. Lowered leveling feet and leveled unit. All operations tested good, no water leaks present."
Near Georgetown, TX 78628
James
Job Details:
12/11/2018
DRYER WHIRLPOOL MGD8200FC0
"Arrived on site and installed new base, motor, housing and blower wheel. Tested for proper operation and found unit working properly. Job complete"
Near Copperas Cove, TX 76522
Steve C.
Job Details:
12/11/2018
REFRIGERATOR WHIRLPOOL WRS315SDHZ00
Arrived on site for the unit is not freezing or cooling. Tested the unit and found the compressor will turn off and on. Found the start device is defective due to short. Use a start device from personal stock and tested the unit. Unit works properly and all water connections were dry at the time of service.; used 1 WPW10197428 (START DEVICE ) from stock
Near Copperas Cove, TX 76522
Steve C.
Job Details:
12/11/2018
COOKTOP KITCHENAID KECC560BBL1
Arrived on site for the left rear burner is not turning on for the dual element. Found the outer element is shorted. Replaced the left rear burner and tested the unit. Unit works properly and job complete.
Near Killeen, TX 76542
Steve C.
Job Details:
12/11/2018
WASHER WHIRLPOOL WTW8040DW0
"Arrived on site to replace the spin basket, gear case, wash plate, and all for leveling legs due to unit going out of balance. Replaced all parts and tested the unit. Calibrated the unit and unit is working properly. All water connections were dry at the time of service."
Near Round Rock, TX 78681
Paul
Job Details:
12/11/2018
REFRIGERATOR KITCHENAID KRMF606ESS01
"Arrived onsite for the refrigerator not dispensing ice. Found the motor with 108VDC to it and it not running. I found 108VDC out of P3-7 BU and P3-8 GY at the control. Voltage should be 130-140VDC per the tech sheet and I suspect the low voltage is taking the motor out. I found the ice door not closing correctly on the separator because of the way it’s molded. Need to replace the main control, ice door, and auger motor to complete service. Ordering WPW10675033 CNTRL-ELEC & returning with the ice door and motor. RS for Thu 12/13.; ordrng 1 WPW10675033 (CNTRL-ELEC)"
Near Harker Heights, TX 76548
Arthur B.
Job Details:
12/11/2018
MICROWAVE WHIRLPOOL MH1170XSS2
Arrived onsite to install AHS provided control to OTR microwave from prior visit’s rediagnosis. Removed and replaced control board. Reassembled. Tested unit. Unit’s CANCEL and START buttons now work as intended. No other issues found.
Near Georgetown, TX 78633
Jerry C.
Job Details:
12/11/2018
MICROWAVE KITCHENAID KMBS104ESS02
KMBS104ESS02 Arrived to instal previously diagnosed and ordered part. I removed and replaced the door assembly and tested. The unit had a more predictable and solid door closing feel after the replacement. Operational test good.
Near Georgetown, TX 78633
Jerry C.
Job Details:
12/11/2018
OVEN KITCHENAID KODE300ESS02
KODE300ESS02 Arrived to inspect error. I found the unit had F5E1 stored within memory. I verified conductivity through the latch and then that there was no voltage being sent to it. I removed and replaced the control and tested. Operational test good.
Near Killeen, TX 76549
Al
Job Details:
12/11/2018
WASHER WHIRLPOOL WFW70HEBW
Arrived to inspect F9E1 LONG DRAIN. I confirmed the complaint and disassembled the unit and checked the drain access door and found the several items in the door access. I removed the debris and reassembled the unit. I tested the washer and it tested as designed. All water lines were dry at the time of service.JOB COMPLETE
Near Liberty Hill, TX 78642
Jerry C.
Job Details:
12/11/2018
OVEN WHIRLPOOL WOD51EC0AS05
"WOD51EC0AS05 Arrived to inspect foil burnt. I discussed the issue with the customer and recommended no longer using foil to catch spills, directly on the floor of the oven chamber. I advised the customer they could use foil on a rack at the lowest level. The upper door seal required replacement. Operational test good."
Near , TX 78628
Jerry C.
Job Details:
12/11/2018
OVEN WHIRLPOOL WCG55US0HS00
WCG55US0HS00 Arrived to instal parts. I found no actuation when the left rear burner control was depressed. Manually pressing the switch yielded sporadic ignition. I removed and replaced the switch harness and the unit resumed normal operation. No gas leaks detected during service.
Near Round Rock, TX 78681
Tyler B.
Job Details:
12/11/2018
RANGE WHIRLPOOL WFG540H0ES1
Arrived on site for back burner not igniting. R&R head and didn't work right module and tests good. No gas leaks on site
Near Killeen, TX 76542
Arthur B.
Job Details:
12/11/2018
REFRIGERATOR WHIRLPOOL WRX988SIBM01
Arrived onsite for customer complaint of no ice production. Ran diagnostics test 057 and found error code E2 (Lost Home Position). Removed and replaced icemaker. Reassembled and tested unit. Unit called for water immediately. All water connections were dry at time of service.
Near Kempner, TX 76539
Arthur B.
Job Details:
12/11/2018
WASHER WHIRLPOOL WTW8600YW0
"Arrived onsite to install new outer tub assembly to top load washer from prior tech’s diagnosis. Removed and replaced outer tub. Installed also rotor,stator, and tub ring. Reassembled and tested unit. Unit fills,agitates,drain and spins as intended. No other issues found. All water connections were dry at time of service."
Near Round Rock, TX 78681
Tyler B.
Job Details:
12/11/2018
DISHWASHER WHIRLPOOL WDF540PADB0
Arrived on site for console and vent replacement for leaking. R&R console vent and gasket and tested good. No leaks on site
Near Austin, TX 78704
Luis
Job Details:
12/11/2018
REFRIGERATOR AMANA ART104TFDW00
"Arrived on site for cooling issue. Unit working at time of visit. Tenant showed video of issue, lights and unit powering off and on. Checked all harness’ on unit all harness connected good and tight. Advised tenant if issue continues to plug refrigerator to differ t outlet to see if same issue occurs."
Near Leander, TX 78641
James
Job Details:
12/11/2018
REFRIGERATOR WHIRLPOOL WRV986FDEM01
Arrived on site and inspected doors for rust. I found spots of rust on all 5 doors and the freezer door is the worst. Unit will need all 5 doors to repair as the rust is not coming off with the stainless steel brightener that customer received from Whirlpool. Instructed customer that the doors will take 6-8 weeks to arrive. Also found the mullion is not closing properly again and will need to be replaced; ordrng 1 W10815674 (dor-fip ss SNACK LEFT) and 1 W10815676 (dor-fip ss SNACK RIGHT) and 1 W10815685 (dor-fip ss RIGHT) and 1 W10815692 (dor-fip ss LEFT) and 1 W10815698 (dor-fip ss FREEZER) and 1 W11122876 (rail-mulln) and 1 W11205081 (CHUTE)
Near Pflugerville, TX 78660
Wesley
Job Details:
12/11/2018
DISHWASHER WHIRLPOOL WDT720PADM1
Arrived on site for a failed pump. Replaced sump and motor. Unit now operating properly.
Near Cedar Park, TX 78613
James
Job Details:
12/11/2018
WASHER MAYTAG MVWB950YW1
Arrived on site and tested unit. Found that the suspension has failed and the tub drops all the way down in diagnostics mode causing rotor to make contact with the tile floor. Unit will need new suspension to repair; ordrng 1 W10440786 (suspension)
Near Pflugerville, TX 78660
Jonathan S
Job Details:
12/11/2018
MICROWAVE WHIRLPOOL WMH32519FB1
"Arrived on site microwave sparking on the inside. Inspected unit and found several burnt marks on the inside. Tested unit, all else tested good. Advised customer not to use until repair is completed. Schedule return for Friday the 14th. ; ordrng 1 W10134625 (tuchup/GRAY) and 1 WP4396174 (GRAY ) and 1 WP4396174 (DARK GRAY )"
Near Taylor, TX 76574
Wesley
Job Details:
12/11/2018
REFRIGERATOR KITCHENAID KRMF706ESS01
"Arrived on site and found unit with water off. Turning on water did not yield any leaks. Found ice container empty and water leaking evidence from melting ice, Advised on findings. Customer has elected to leave water turned off until final repair. All else checks good."
Near Cedar Park, TX 78613
Lou
Job Details:
12/11/2018
OVEN WHIRLPOOL WFE515S0ES0
"arrived on site to inspect oven error code. Upon further inspection, I found the unit unplugged with the back cover sitting on top of the range cooktop. The customer advised that the builder looked at the unit and said the wiring was good. I pulled the unit from its space and found that the red wire was badly burnt at the terminal block and the red wire to the power cord was badly burnt also. I removed and replaced the main wiring harness ad will have to order the power cord in order to be able to further inspect the unit. I am ordering the 4 prong power cord ad will return with the main control. I scheduled return service for 12/12/18. The unit was left unplugged.; ordrng 1 TJ614 (RANGE POWER CORD)"
Near Austin, TX 78748
Leonardo
Job Details:
12/11/2018
RANGE WHIRLPOOL WFG515S0ES
Arrived on site knocked on door and no answer called customer and customer rescheduled for Wednesday afternoon if possible 12-3 ; schdld next appmnt for 12/12 WED 12-3
Near Georgetown, TX 78628
Steve C.
Job Details:
12/11/2018
COOKTOP JENN-AIR JGCP536WP01
Arrived on site to replace the right front burner gas valve. Removed the control panel and found the new valve has a dual gas connections and old valve is one connection for gas. Need to put part in research and reschedule customer. Called CS and advise to order all valves and to verify. Advise customer to that the office will call them to verify.; ordrng 1 CNOTE (TECH2VERIFY ) and 1 RESEARCH (RIGHT FRONT BURNER) and 1 WPW10371235 (valve-brnr RF) and 1 WPW10385582 (valve-brnr LF) and 1 WPW10385583 (valve-brnr SIMMER)
Near Killeen, TX 76542
Al
Job Details:
12/11/2018
MICROWAVE GE JNM1541DM5BB
"Arrived to install previously ordered parts. I removed the microwave and installed the turntable motor, Magnetron, capacitor and diode. I tested the unit and unit still did not heat the cup of water nor did the turntable turn when the water was inside. Ordered WB27X10931 control.NEEDS MORE WORK; ordrng 1 CNOTE (NEEDS AUTHORIZATION ) and 1 WB27X10931 (CONTROL )"
Near Austin, TX 78745
Luis
Job Details:
12/11/2018
REFRIGERATOR MAYTAG MRT118FFFH01
"Arrived on site for no cool. Found uv dye on manufacture weld joint on evaporator. Called tech support to document evaporator needed. Removed faulty evaporator installed new evaporator,vacuumed system down unit kept vacuum recharged system to manufacture spec powered unit on checked low side pressure good checked frost pattern good unit cooling down correctly. File number 7723652387C. Note!!!!; ordrng 1 NEEDAUTHOFORLABOR and 1 TALKEDTOMELISSAABOUTAUTHOFORLABOR"
Near Austin, TX 78750
Paul
Job Details:
12/07/2018
OVEN JENN-AIR JJW9430DDB
Arrived onsite for the oven not heating in either compartment. I found only 15 volts at the terminal block on L2. I suspect a bad circuit breaker and advised the customer to call an electrician.
Near Killeen, TX 76541
Al
Job Details:
12/07/2018
REFRIGERATOR WHIRLPOOL WRF535SMHB00
"Arrived to install gasket. Removed door, installed gasket and reassembled the unit. Job Complete"
Near Austin, TX 78751
Joseph C.
Job Details:
12/07/2018
DISHWASHER JENN-AIR JDTSS244GP0
"Arrived on site for “broken upper rack rails” complaint. Inspected unit and found left upper rack rail broken and right rail bent. Removed and replaced both upper rack rails. Tested unit. Unit is performing as designed. No leaks detected, at time of service."
Near New Braunfels, TX 78132
Diego G.
Job Details:
12/07/2018
MICROWAVE KITCHENAID KBHS109SSS06
"Arrived on site. Checked for noise issues. Found turntable motor making loud noise when in use. Replaced turntable motor and cycled, all functions tested ok.
Near New Braunfels, TX 78132
Diego G.
Job Details:
12/07/2018
MICROWAVE KITCHENAID KBHS109SSS06
"Arrived on site. Checked for noise issues. Found turntable motor making loud noise when in use. Replaced turntable motor and cycled, all functions tested ok.
Near New Braunfels, TX 78132
Diego G.
Job Details:
12/07/2018
MICROWAVE KITCHENAID KBHS109SSS06
"Arrived on site. Checked for noise issues. Found turntable motor making loud noise when in use. Replaced turntable motor and cycled, all functions tested ok.
Near New Braunfels, TX 78132
Diego G.
Job Details:
12/07/2018
MICROWAVE JENN-AIR JMC2430DP01
"Arrived on site. Replaced magnetron, inverter, thermostat, control and magnetron thermostat. Still same issue. Called tech-support and found unit dropping voltage to 80 V while in use from white to black. Instructed customer they will need to have electrician come out to fix problem. Job complete. File#7723525218"
Near New Braunfels, TX 78132
Diego G.
Job Details:
12/07/2018
MICROWAVE JENN-AIR JMC2430DP01
"Arrived on site. Replaced magnetron, inverter, thermostat, control and magnetron thermostat. Still same issue. Called tech-support and found unit dropping voltage to 80 V while in use from white to black. Instructed customer they will need to have electrician come out to fix problem. Job complete. File#7723525218"
Near New Braunfels, TX 78132
Diego G.
Job Details:
12/07/2018
MICROWAVE JENN-AIR JMC2430DP01
"Arrived on site. Replaced magnetron, inverter, thermostat, control and magnetron thermostat. Still same issue. Called tech-support and found unit dropping voltage to 80 V while in use from white to black. Instructed customer they will need to have electrician come out to fix problem. Job complete. File#7723525218"
Near Kyle, TX 78640
Leonardo
Job Details:
12/07/2018
DISHWASHER WHIRLPOOL WDF330PAHS2
Arrived on site to test unit for lower rack falling to side. Test unit and found wheels broken. Replaced wheels test unit and unit test good job complete. Heating element working correctly advised customer to use rinse aid.
Near Seguin, TX 78155
Robert
Job Details:
12/07/2018
DRYER GE DCVH480EK0WW
Arrived on job for complaints of not drying and shutting off in middle of cycle. Will not power on right away must wait for cooling. Checked power and it’s correct not loosing power.
Near Seguin, TX 78155
Robert
Job Details:
12/07/2018
DISHWASHER KITCHENAID KDFE104DSS5
Arrived on job for complaints of not cleaning. Found wash motor not working with 120v supply. Replaced sump and motor . Test washer all good no leaks.
Near Seguin, TX 78155
Robert
Job Details:
12/07/2018
WASHER MAYTAG MVWB835DW3
Arrived on job for complaints of not always spinning clothes out. Ran diagnostics and got code F3E2 inlet thermistor error.ran diagnostic cycle. Found drain hose too far in drain. Tie hose to correct.
Near McQueeney, TX 78123
Robert
Job Details:
12/07/2018
DRYER MAYTAG MEDC215EW
Arrived on job for complaints of not working. Found fuse open. Replaced fuse and test heater and air flow.
Near Kyle, TX 78640
Kevin
Job Details:
12/07/2018
REFRIGERATOR MAYTAG MFI2570FEZ05
"Arrived on site and replaced both waterlines and icemaker diagnosed on previous visit, after replacement confirmed icemaker will cycle properly waterlines are no longer leaking and confirmed reservoir is not leaking when the water is being dispensed. No water leaks from connections at time of service, job complete."
Near Austin, TX 78723
Joseph C.
Job Details:
12/07/2018
WASHER WHIRLPOOL WFW7590FW0
"Arrived on site for “F1E1 error code” complaint. Inspected unit and found ACU to be faulty. Removed and replaced ACU. Tested unit. Unit is performing as designed. No leaks detected, at time of service."
Near Austin, TX 78724
Joseph C.
Job Details:
12/07/2018
DRYER MAYTAG MEDC465HW0
"Arrived on site for “no heat” complaint. Per my previous diagnosis, removed and replaced temp selector switch. Tested unit. Unit is performing as designed. Instructed customer to clean venting every six months to prevent possible fire hazards and for better performance and economy."
Near Austin, TX 78749
Brandon
Job Details:
12/07/2018
DISHWASHER KITCHENAID KUDS35FXSS8
"Arrived on site for customer complaint of burning smell, found heater and wire harness were burnt. I replaced bother the heater and harness, unit tested good.
Near Austin, TX 78739
Brandon
Job Details:
12/07/2018
MICROWAVE KITCHENAID KHMS1850SSS1
"Arrived on site for customer complaint of grill being broken, I replaced grill, unit tested good.
Near Lakeway, TX 78734
Cliff
Job Details:
12/07/2018
COOKTOP JENN-AIR JID4436ES0
Cooktop was not received. Per CS order part and office to reschedule.; ordrng 1 CNOTES (3 HOUR JOB) and 1 W10914906 (cooktop)
Near Buda, TX 78610
Leonardo
Job Details:
12/07/2018
DISHWASHER WHIRLPOOL WDF330PAHS2
Arrived on site to test unit for door not staying down. Test unit and found both friction pads broken. Replaced friction pads and unit door staying down. Job complete no leaks present at this time.
Near Buda, TX 78610
Leonardo
Job Details:
12/07/2018
DISHWASHER WHIRLPOOL WDT970SAHV0
Arrived on site to test unit for upper rack falling. Test unit and found broken adjuster and stopper. Replaced both parts test unit and unit test good job complete no leaks present at this time.
Near Austin, TX 78753
Luis
Job Details:
12/07/2018
REFRIGERATOR WHIRLPOOL WRT311FZDW00
"Arrived on site for refrigerant leak in system. Removed compressor,evaporator and filter drier. Installed new compressor,evaporator and a uv drier, vacuumed system down unit kept vacuum recharged system to manufacture spec powered unit on checked low side pressure good checked frost pattern good unit cooling down correctly"
Near Austin, TX 78753
Luis
Job Details:
12/07/2018
REFRIGERATOR KITCHENAID KSRS25CNSS00
"Arrived on site for unit not cooling correctly. Compressor and fans running,removed evaporator cover partial frost pattern on evaporator coil,frost only on bottom section of coil. Diagnosed leak in sealed system estimate for evaporator replacement
Near Lakeway, TX 78734
Cliff
Job Details:
12/07/2018
DRYER WHIRLPOOL LE5795XPW0
Arrived on site to diagnose a dryer that will not start. Found drum stopped in a position causing motor to struggle to start. Reset drum position and tested unit multiple times. But all is functioning properly at this time. No further repairs are needed.
Near Round Rock, TX 78665
Wesley
Job Details:
12/07/2018
COOKTOP WHIRLPOOL KCGS356ESS
"Arrived on site and found gas leak from loose hose connection. Tightened connections, now unit is operating as designed. All checks good."
Near Austin, TX 78754
Scott
Job Details:
12/07/2018
DISHWASHER WHIRLPOOL WDF520PADM7
"Arrived on site for no water coming into dish washer . Found water was shut off , valve separate then faucet . Turned water on and ran diagnostics all checked good . No water leaks detected at time of service . Job complete ."
Near Round Rock, TX 78664
Wesley
Job Details:
12/07/2018
DRYER WHIRLPOOL WGD95HEDW
Arrived on site and found unit rattling. Installed repair kit and used pads to dampen motor mount plate. Unit is now operating without the rattle.
Near Pflugerville, TX 78660
Wesley
Job Details:
12/07/2018
REFRIGERATOR WHIRLPOOL WRX735SDBE01
Arrived on site and installed door and handle. All checks good. Unit is now operating as designed.
Near Pflugerville, TX 78660
Wesley
Job Details:
12/07/2018
DRYER WHIRLPOOL WED92HEFW1
Arrived on site and used pads to eliminate rattle. All checks good. Unit now operating as designed.
Near Round Rock, TX 78665
Wesley
Job Details:
12/07/2018
DRYER MAYTAG MEDX655DW1
Arrived on site and installed cutoff kit . Tested unit and found airflow problem. Advised customer to have vent cleaned soon.
Near Round Rock, TX 78664
Wesley
Job Details:
12/07/2018
RANGE WHIRLPOOL WFG525S0HS0
Arrived on site and corrected p11 connection per techsheet. Eliminated error code. Unit is now operating as designed.
Near Austin, TX 78723
Joseph C.
Job Details:
12/07/2018
REFRIGERATOR MAYTAG M8RXEGMAB02
Near Austin, TX 78749
Brandon
Job Details:
12/07/2018
DRYER WHIRLPOOL MEDB765FW0
"Arrived on site for customer complaint of loud noise issue, found right side frame damage, door damage, and kick plate/panel damage. Ordering all parts. SR# 7723621680; ordrng 1 697215 (toepnl w) and 1 697227 (DOOR FRAME) and 1 CNOTE (OFFICE TO RESCHEDULE ) and 1 CNOTE (2 HOUR JOB) and 1 W10547697 (cabinet)"
Near Austin, TX 78727
Tyler B.
Job Details:
12/07/2018
WASHER WHIRLPOOL WFW92HEFW0
"Arrived on sote for f01 e01 error in all cycles, determined failed control. Replaced control and tested good in quick wash. No leaks on siteControl
Near Austin, TX 78739
Brandon
Job Details:
12/07/2018
OVEN UNKNOWN RBD245PDQ14
"Arrived on site for customer complaint of wall oven not working, found faulty control board, I pulled control for rebuild. ordrng 1 8302152 (microcomputer (REBUILD)) and 1 CNOTE (OFFICE TO RESCHEDULE )"
Near Austin, TX 78758
Tyler B.
Job Details:
12/07/2018
MICROWAVE GE JKP85B0A3BB
"Arrived back on sote for no spin no heat. Found door switch connector spade not goin in terminal but under it, replaced door switches and corrected connector and tested good. No loose connections"
Near Austin, TX 78728
Lou
Job Details:
12/07/2018
DISHWASHER KITCHENAID KDTE704DBL0
"arrived on site to install previously diagnosed and ordered parts. At the previous service call, I found that the water valve was bad. Today, I removed and replaced the water valve and tested the unit. It operated as designed with no error codes. I advised the customer of the repair. I did not need the UI panel previously diagnosed nor the control that I returned with today. No water leaks observed during service, job completed.