Service History 1597 - Appliance Express

Near Austin, TX 78730

Luis

Job Details: 02/08/2019

REFRIGERATOR KITCHENAID KBRC36FTS04 "Arrived on site for water leaking. Diagnosed ice in drain,defrosted drain and freezer floor,checked water flow through drain good. Labor"

Near Cedar Creek, TX 78612

Joseph C.

Job Details: 02/08/2019

REFRIGERATOR WHIRLPOOL WRT519SZDW02 "Arrived on site for “not cooling issues” complaint. Inspected unit and found evaporator with no frost. Compressor is running and has no issues. Will need new compressor, evaporator, drier and access valve.

Near Hutto, TX 78634

Wesley

Job Details: 02/07/2019

WASHER MAYTAG MVWC425BW Arrived on site and found unit gearcase and cam and cap and actuator damaged from seal leak. Ordering gearcase and returning with other parts to repair. Unit is job is half performed and unit gearcase is resting under unit. ; ordrng 1 W11035747 (gearcase)

Near Temple, TX 76504

Arthur B.

Job Details: 02/07/2019

WASHER WHIRLPOOL WFW75HEFW0 Arrived onsite for customer complaint of grinding noises coming from front load washer. Hand spun unit and found bearing making grinding noises. Advised that unit will need new tub assembly. OF to R/S once part is available. No water connected to unit at time of service.; ordrng 1 W10901030 (tub-outer)

Near Austin, TX 78702

Luis

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRS571CIHZ01 "Arrived on site for noise issue. Customer complaint of noise is from evaporator fan motor. Ran diagnostics on fan,fan running no vibration noise. Compressor powered on no odd noise from compressor or condenser fan. U it running as designed"

Near Killeen, TX 76549

Job Details: 02/07/2019

WASHER MAYTAG MVWB835DW1 Arrived to inspect washer not starting. Verified complaint and looked underneath and saw there was an item stuck between the outer and inner tub. Disassembled and removed. Reassembled and tested the unit tested as designed. All water lines were dry at the time of service.JOB COMPLETE.

Near Austin, TX 78729

Cliff

Job Details: 02/07/2019

DISHWASHER WHIRLPOOL WDT910SAYM3 Arrived on site to diagnose a dishwasher that is not cleaning properly. Tested unit and found failed pump and motor assembly. Replaced pump and motor assembly and tested unit. Found all is functioning properly at this time. No leaks were found at time of service.

Near Round Rock, TX 78664

Wesley

Job Details: 02/07/2019

WASHER WHIRLPOOL WTW4816FW2 Arrived on site and found unit cold water valve was clogged. Removed debris and inspected unit for any other problems. All checks good. Unit is now operating as designed. Advised customer on repair and on use and care.

Near Pflugerville, TX 78660

Tyler B.

Job Details: 02/07/2019

RANGE WHIRLPOOL WFG525S0HS0 "Arrived on site for hinge replacement, replaced and tested good."

Near Temple, TX 76501

Arthur B.

Job Details: 02/07/2019

WASHER WHIRLPOOL WTW4816FW2 Arrived onsite for customer complaint of top load washer not coming on. Removed control panel and found power cable loose. Tighten power supply cord and calibrated unit. Unit completed successfully. No other issues found. All water connections were dry at time of service.

Near Round Rock, TX 78664

Cliff

Job Details: 02/07/2019

WASHER WHIRLPOOL 110.272726 Arrived on site to replace agitator for washer. Found unit completely rusted out causing agitator bolt not to come off of transmission assembly due to age and condition of unit customer wants to replace washer but paid in advance for repair. Office will need to refund all collected except service fee for diagnostics. Refund owed per CS.

Near Pflugerville, TX 78660

Joseph C.

Job Details: 02/07/2019

MICROWAVE WHIRLPOOL WMH31017HZ0 Arrived on site for “microwave door not closing” complaint. Inspected unit and found top interlock sprung. Reassembled interlock and installed. Tested unit. Unit is performing as designed.

Near Austin, TX 78660

Joseph C.

Job Details: 02/07/2019

MICROWAVE WHIRLPOOL WMH32519HZ3 Arrived on site for “not heating” complaint. Inspected unit and found transformer faulty. Removed and replaced faulty transformer. Tested unit. Unit tests good.

Near Pflugerville, TX 78660

Wesley

Job Details: 02/07/2019

DISHWASHER WHIRLPOOL WDTA50SAHZ0 Arrived on site and found unit door latch error. Found loose. Secured and advised customer on repair and advised on use and cafe and optimization of performance

Near Buda, TX 78610

Leonardo

Job Details: 02/07/2019

RANGE WHIRLPOOL WFG320M0BB2 Arrived on site to test unit for unit over cooking. Test unit and found oven gettin to 425 when set at 350. Replaced sensor test unit and unit test good at 350. Job complete no leaks present at this time.

Near Austin, TX 78745

Kevin

Job Details: 02/07/2019

WASHER MAYTAG MVWC565FW1 "Arrived on site and set washer into diagnostic cycle and manually filled it 8 inches deep in the basket. Found a couple of water drips from hot water hose connection onto valve and tightened connection. Remove control panel and inspected valve and did not find any leaking or water residue. Drained all the water in the tub, standpipe did not overfill. Did not observe any water collecting on the floor or outside of washer. Next used manual cycle to fill hot and cold water at the same time while draining, still did not observe any leaking and standpipe did not overfill. Could not duplicate customers experience during service call, requested the customer leave the washer 2 feet away from the wall for the next several loads to see if this helps in determining where water originates from. No water leaks from connections at time of service, job complete."

Near New Braunfels, TX 78132

Leonardo

Job Details: 02/07/2019

COOKTOP WHIRLPOOL WCG97US6DS00 Arrived on site to test unit for RF burner not igniting all the time. Test unit and found bad ignitor. Replaced ignitor test unit and unit working correctly job complete no leaks present at this time.

Near San Marcos, TX 78666

Diego G.

Job Details: 02/07/2019

DRYER WHIRLPOOL WED8500BW0 Arrived on site. Checked for burning smell issues. Ran diagnostic test and found error code for restricted airflow. Verified temperatures on dryer all checked OK. Instructed customer they will need to clean out exhaust in order for moisture and lint can go outside. No leaks present. Job complete

Near San Marcos, TX 78666

Diego G.

Job Details: 02/07/2019

Near San Marcos, TX 78666

Diego G.

Job Details: 02/07/2019

Near Austin, TX 78745

Luis

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRT134TFDW00 Arrived on site for ice build up on roof of freezer. Customer defrosted unit found excessive moisture on roof in freezer. Found large gaps between liner and cabinet also found corner of gaskets not sealing to cabinet. Added adhesive to liner gaps remolded freezer door gaskets. Checked door seal good.

Near Austin, TX 78748

Luis

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL ED5VHEXTL01 "Arrived on site for no water tested dispenser no water found dispenser set on locked,unlocked dispenser tested water good water flow ran icemaker through a cycle ice dumped and filled with water"

Near Marble Falls, TX 78654

Thomas L.

Job Details: 02/07/2019

MICROWAVE WHIRLPOOL CAE2795FQ0 Arrived on site for unit that would not operate. Found unit would not operate. Entered technician diagnostic modes and re-calibrated control. Unit operating properly and customer needs to address hot water issue.

Near Seguin, TX 78155

Diego G.

Job Details: 02/07/2019

DRYER MAYTAG MEDX655DW1 "arrived on site. Replaced drum assembly and cycled, all functions tested OK. Instructed customer to run a cycle by it self to eliminate any oil’s on drum. No leaks present. Job complete"

Near Seguin, TX 78155

Diego G.

Job Details: 02/07/2019

Near Seguin, TX 78155

Diego G.

Job Details: 02/07/2019

Near Waco, TX 76705

Steve C.

Job Details: 02/07/2019

WASHER WHIRLPOOL NTW4516FW2 Arrived on site for the unit is not working properly. Found the unit is unplugged and customer advised is not working. Plug the unit in and found the drain pump will constantly be on. Re-adjusted the pressure hose on the control board and the unit is working properly. Also calibrated the unit and all water connections were dry at the time of service.

Near Elgin, TX 78621

Wesley

Job Details: 02/07/2019

MICROWAVE WHIRLPOOL WMH53521HZ0 Arrived on site and found unit operating as designed. Advised customer on findings. All checks good. Instructed on use and care.

Near Elgin, TX 78621

Wesley

Job Details: 02/07/2019

WASHER WHIRLPOOL WFW75HEFW0 F6e3 communication error and f6e1 with control. Replaced control. All checks good.

Near Pflugerville, TX 78660

Tyler B.

Job Details: 02/07/2019

DRYER MAYTAG MEDB835DW4 "Arrived on site for af error. Arrived with af error, tests both thermistors and passed. Replaced complexed vent hose for a flex hose and still got error. Removed the vent from house and ran unit and unit did not give error, good air flow light came one. Repeated for customer to see that vent is still clogged."

Near Killeen, TX 76543

Arthur B.

Job Details: 02/07/2019

WASHER AMANA NTW4516FW2 "Arrived onsite for customer complaint of top load washer not filling properly. Manually tested fill valves and found cold water barely coming into unit. Removed and replaced water valve. Reassembled and tested unit. Unit now fills,agitates,drain and spins as intended. All water connections were dry at time of service."

Near Lampasas, TX 76550

Arthur B.

Job Details: 02/07/2019

WASHER MAYTAG MVWC565FW1 "Arrived onsite for customer complaint of top load washer not draining out all water out of clothes. Ran diagnostics and found F8E1 (Long Fill) error. Tested unit. Found unit fills as intended. Did find when other water is on in other areas of the home, water pressure is greatly reduced. Customer live in rural county area where water is supply by well. Advised customer that when computer senses u it has not reached water fill level with allotted time, unit will drain and cancel out. Advised customer to raise water pressure to house or not use any other water source while using unit. Cleared error codes and calibrated unit. Unit calibrated successfully. All water connections were dry at time of service."

Near Cedar Park, TX 78613

Cliff

Job Details: 02/07/2019

WASHER WHIRLPOOL WTW8500DC5 Arrived on site to diagnose a washer that is not operating. Found long fill error code and hot water valve turned off at wall. Turn on hot water and advised homeowner on thermistor valve operation. No more repairs are needed and all checks good at this time. No leaks were found at time of service.

Near Austin, TX 78758

Scott

Job Details: 02/07/2019

DISHWASHER WHIRLPOOL WDT710PAHZ1 "Arrived on site , replaced door panel . No water leaks detected at time of service . Job complete ."

Near Austin, TX 78701

Robert

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRT518SZFM00 "Arrived on job for complaints of door not closing. Attempted to adjust door,made no difference. Tried to adjust machine,made no difference. Called tech line 7724101839 asked customer to close both doors at same time. No leaks detected at time of service."

Near Austin, TX 78734

Paul

Job Details: 02/07/2019

COOKTOP JENN-AIR JGC1530BS00 Arrived onsite for cooktop that is burning the bottom of the pans on the center burner and can’t adjust the flame down. Ms stated this description was wrong and the actual complaint is that the burner still yellows on the low setting and in between low to simmer. I found the burner still yellowing when set to low and worse turning it down to simmer until it was all the way on simmer. The burner looks good on high and simmer. I spoke with Ed at techline. Ed advised replacing the complete manifold again because this is a air/fuel mixture issue. After replacing the manifold reinstall the correct orifice and test it. If the unit doesn’t burn correctly at this point install the next size smaller and test it and off this still doesn’t correct the flame install the 88 in the kit and test it. If this corrects the flame call techline and report this. SR# 7724118536. Ordering c-notes & W10691441 MANIFOLD. ; ordrng 1 C-NOTES (THE OFFICE WILL NEED TO SCHEDULE THE RETUR

Near Smithville, TX 78957

Joseph C.

Job Details: 02/07/2019

WASHER ADMIRAL ATW4676BQ1 "Arrived on site for “unit not draining” complaint. Inspected unit and found bailing wire, like previous visits. Removed wire and changed pump. Tested and calibrated unit. Unit is performing as designed. No leaks detected, at time of service."

Near Round Rock, TX 78665

Tyler B.

Job Details: 02/07/2019

REFRIGERATOR GE GSH25JSDDSS "Arrived on site for unit not dispensing water, tested at dispenser and couldn't hear valve, replaced valve and did not fix, found filter head rusty and recommend that it should be replaced. Replaced and still did not fix, found tube in door frozen, spend hour steaming line,

Near New Braunfels, TX 78130

Diego G.

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRS315SDHM00 Arrived on site. Check for Icemaker issues. Found ice in ice bin clumped up together. Verified enough water coming in to icemaker. Adjusted damper to allow more air in freezer. Instructed customer to dump out ice been once a month to keep from clumping. All functions tested OK. No leaks present. Job complete

Near New Braunfels, TX 78130

Diego G.

Job Details: 02/07/2019

Near New Braunfels, TX 78130

Diego G.

Job Details: 02/07/2019

Near Taylor, TX 76574

Wesley

Job Details: 02/07/2019

OVEN WHIRLPOOL WFE505W0HW0 "Arrived on site and found unit operating as designed. Adjusted calibration per customer experience. All checks good, advised customer on use and care."

Near Round Rock, TX 78665

Tyler B.

Job Details: 02/07/2019

VENTHOOD WHIRLPOOL VWU37UC0FS0 Arrived on site for vent not running. Found connection loose on junction . Corrected and tested made loud noise. Found out screw too deep. Corrected and tested good

Near Georgetown, TX 78633

Steve C.

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRS571CIDB01 Arrived on site for the unit is not making ice. Tested the unit and found under the freezer door the wires are broken. Found the unit will need a new freezer door and the office will have to get authorization. Office will need to reschedule the customer.; ordrng 1 LW10859844 (FREEZER DOOR BLK)

Near Kyle, TX 78640

Robert

Job Details: 02/07/2019

DRYER WHIRLPOOL WED4815EW1 Arrived on job for complaints of dryer not drying. After inspection found cutoff switch open replaced cutoff switch ran test cycle and operation was normal. Also recommended customer gets vent cleaning service to maintain proper air flow.

Near Austin, TX 78744

Kevin

Job Details: 02/07/2019

REFRIGERATOR KITCHENAID KRFC300ESS01 "Arrived on site and inspected refrigerator and found handle is loose on freezer, attempted to tighten it but left-hand side riser is loose from actual handlebar and it will need to be replaced. No water leaks from connections at time of service customer requested Wednesday, February 13 for next visit; ordrng 1 W10915364 (handle)"

Near Canyon Lake, TX 78133

Robert

Job Details: 02/07/2019

OVEN JENN-AIR JGRP436WP02 Arrived on job for complaints of gas smell in oven. Adjusted air to fuel mixture. No leaks detected.

Near Liberty Hill, TX 78642

Steve C.

Job Details: 02/07/2019

REFRIGERATOR FRIGIDAIRE LFHT1817LWA Arrived on site for the unit is not cooling in the ff section. The freezer is at 0 degrees. Tested the unit and found the evaporator fan motor will not turn and there is voltage to the motor. The fan motor is defective. .; ordrng 1 242077702 (motor)

Near Canyon Lake, TX 78133

Robert

Job Details: 02/07/2019

OVEN WHIRLPOOL WOD51EC0HS01 Arrived on job for complaints of time dropping minutes on oven. Called tech line 7724115972 and tech line verified hz below 60 which causes clock to run slow. Will need electrician to correct power supply issue.

Near Johnson City, TX 78636

Brandon

Job Details: 02/07/2019

WASHER MAYTAG MHW5500FC1 "Arrived on site to replace control board, after replacing unit tested good."

Near Buda, TX 78610

Kevin

Job Details: 02/07/2019

UNKNOWN UNKNOWN VAN NISSAN oil change

Near Austin, TX 78729

Cliff

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL KFIV29PCMS02 Arrived on site to diagnose a refrigerator that is leaking. Found drain tube clogged. Remove the clog from tube and found water flowing properly at this time. No other leaks were found at time of service. Homeowner is going to thaw unit manually over 24 hour period With all doors open and has signed defrost waiver.

Near Austin, TX 78728

Cliff

Job Details: 02/07/2019

OVEN WHIRLPOOL WOS51EC0HS00 Arrived on site to diagnose an oven that is overheating. Found unit overheating by 25 to 30°. Reset calibration settings to compensate for offset. Found all is now functioning properly.

Near Georgetown, TX 78633

Steve C.

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRS325SDHZ01 Arrived on site for the unit is not getting cold in the refrigerator section. Found all the fans are working properly and the temperature in the freezer is at 0°. Found The customer is using a shelf that is blocking the top shelf and not allowing the air to go to the bottom. Remove the small shelf and tested the unit. Unit is working properly and all water connections were dry at the time of service.

Near Austin, TX 78732

Paul

Job Details: 02/07/2019

COOKTOP JENN-AIR JGD3430BS00 "Arrived onsite for the cooktop with the knobs hard to turn. I found the LF valve locked up and not movable. When trying to access the manifold the screws broke on the RR burner and the LF burner. Need to replace the orifice holders, all of the burner head screws, and the manifold. Ordering WP7527P031-60 HOLDER-ORF, WP7527P003-60 HOLDER-ORF, & 8EA WP90767. Marking the prescreened manifold as UORV.; ordrng 1 WP7527P003-60 (HOLDER-ORF) and 1 WP7527P031-60 (HOLDER-ORF) and 8 WP90767 (SCREW)s"

Near Georgetown, TX 78628

Lou

Job Details: 02/07/2019

WASHER MAYTAG MVWC500VW1 "arrived on site to inspect washer not agitating. Upon further inspection, I placed the unit in agitation mode and the tube/agitator did nothing. I placed it in spin mode and the basket barely moved. I inspected the motor and gearcase components and in spin mode, the motor was turning and the clutch was spinning, but the basket would not spin. I removed the agitator and found the agitator bolt was loose. I tightened the bolt and tested again in agitation and spin and the unit operated as designed. No water leaks observed during service, job completed. Customer has no email address to send a receipt."

Near New Braunfels, TX 78130

Leonardo

Job Details: 02/07/2019

OVEN JENN-AIR JJW2430DP02 Arrived on site to replace console. Replaced console test unit and unit heating correctly job complete.

Near Round Rock, TX 78681

Cliff

Job Details: 02/07/2019

MICROWAVE WHIRLPOOL WMH31017HB0 Arrived on site to diagnose a microwave that Has surfaced lights that are non-operational. Found failed control board due to shortage light relay. Replaced control board and tested unit. Found all is functioning properly at this time.

Near Leander, TX 78641

Cliff

Job Details: 02/07/2019

WASHER WHIRLPOOL MVWB850YW1 Arrived on site to replace bearing for washer. Replaced bearing and tested unit. Found all is functioning properly at this time. Advised homeowner not to use unit for 24 hours to allow seal glue to cure.

Near Georgetown, TX 78628

Arthur B.

Job Details: 02/07/2019

VENTHOOD WHIRLPOOL UXT5230BDS1 Arrived onsite for customer complaint of ventahood fan blade keeps coming off. Found fan blade loose. Removed and replaced both motor and fan blade. Reassembled and tested. Fan blade works as designed. No other issues found.

Near Red Rock, TX 78662

Joseph C.

Job Details: 02/07/2019

REFRIGERATOR FRIGIDAIRE FGHC2331PFAA "Arrived on site for “numbers fading on ui” complaint. Per my previous diagnosis, removed and replaced ui. Tested unit. Unit is performing as designed. No leaks detected, at time of service."

Near Liberty Hill, TX 78642

Steve C.

Job Details: 02/07/2019

REFRIGERATOR KITCHENAID KBRS22KGBL Arrived on site for the unit is freezing. Tested the unit and found the compressor is noisy and hot. The evaporator has a partial frost pattern. Found the unit will need a new compressor. Customer advised he’ll be getting a new unit. All water connections were dry at the time of service.

Near Austin, TX 78739

Kevin

Job Details: 02/07/2019

OVEN WHIRLPOOL WOS92EC0AS04 "Arrived on site and inspected oven and found interior glass has broken, both exterior panels are fine and all shattered glass is being contained inside of door. Will need to bring back interior glass to correct issue.; ordrng 1 WPW10347596 (glass-door)"

Near Leander, TX 78641

Cliff

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRX986SIHZ00 Arrived on site to replace water valve for refrigerator. Replaced valve and found no change in water function for icemaker. Found disconnected wiring harness by compressor for primary valve assembly. Reconnected harness and tested unit. Found all is functioning properly at this time. No leaks were found at time of service.

Near Austin, TX 78748

Kevin

Job Details: 02/07/2019

DISHWASHER WHIRLPOOL WDF520PADM7 "Arrived on site and inspected dishwasher and found no power at terminal block. Found a light switch next to the garbage disposal that is off and after turning it on power has returned to dishwasher. Ran a diagnostic cycle and found all functions are now operating properly. No water leaks from connections at time of service, job complete"

Near New Braunfels, TX 78130

Leonardo

Job Details: 02/07/2019

OVEN JENN-AIR JJW2430DP02 Arrived on site to replace console. Replaced console no error codes showing unit heating correctly job complete.

Near Austin, TX 78753

Robert

Job Details: 02/07/2019

DRYER WHIRLPOOL WGD4800BQ Arrived on job for complaints of clothes not drying. Found blockage in vent preventing air flow. Recommend customer gets air cleaning service.

Near Kyle, TX 78640

Leonardo

Job Details: 02/07/2019

RANGE MAYTAG MGS8800FZ0 Arrived on site to test unit for unit tripping breaker. Test unit and found wire to ignitor harness pinched touching metal. Cleaned wire and secured connection and wire. Test unit and unit test good job complete all ignitor working and unit not tripping breaker.

Near Elgin, TX 78621

Wesley

Job Details: 02/07/2019

OVEN WHIRLPOOL KOST100ESS03 Arrived onsite and found customer had just installed oven and used for the first time. Customer was concerned about factory film and also unable to make selections as customer was pushing too hard on touch panel. All else checks good. Unit is operating as designed.

Near , TX 78628

Thomas L.

Job Details: 02/07/2019

OVEN WHIRLPOOL WOS51EC0AS03 Arrived on site for unit not heating properly. Homeowner feels the unit is under heating slightly. Tested unit to find that it would only heat to 259°. broil element is cherry red so voltage is good. Unit will need bake components. Oven is now too hot now to work with. Will completely diagnose on return trip.; ordrng 1 W10839510 (cntrl-elec) and 1 W10859573 (sensor) and 1 WPW10546517 (elmnt-bake)

Near Round Rock, TX 78681

Lou

Job Details: 02/07/2019

COOKTOP JENN-AIR JGD3430WS00 "arrived on site to inspect cooktop burners not igniting. Upon further inspection, I tested all of the burners and all of the Ignitor worked. The front left burner would not ignite. There was plenty gas flow and the Ignitor was operating, but the arc was not hitting directly on the burner head to ignite the gas. I attempted to clean around the Ignitor and burner head to give the arc a clean surface to hit, but it did not work. I advised the customer that when I go to remove the screws, they will more then likely break, at which time I would have to order the orifice holder and screws. I sprayed some penetrating oil on the screws and when I went to remove the first screw, the head of it sheared off. I advised the customer of the situation and explained that the orifice holder would have to be removed and when I go to remove the other screws, the same issue will happen due to years of corrosion on the screws. At that time, the customer said no to the repair.

Near Dripping Springs, TX 78620

Leonardo

Job Details: 02/07/2019

DISHWASHER KITCHENAID KDTE234GPS0 Arrived on site to replace tracks. Replaced tracks test unit and unit test good. Also saw upper spray arm hitting dishes on bottom rack. Advised customer to be careful on loading the unit because it could cause door not to close correctly or open or leak job complete.

Near Austin, TX 78717

Scott

Job Details: 02/07/2019

WASHER WHIRLPOOL WTW5000DW1 Arrived on site for unit not draining . Found water sitting in washer pan . There was enough water in bottom to have belt sitting in water . Found water valve was leaking . Replaced valve . Ran test cycle all functions are normal . Belt is squealing because it wet . If continues after a couple loads recommend new belt and cam kit . No water leaks detected at time of service . Job complete .

Near Austin, TX 78753

Wesley

Job Details: 02/07/2019

DRYER MAYTAG MGD8200FW0 Arrived on site and found unit pausing and steaming even when steam not selected. Reset unit control and checked all connections. Airflow excellent. All else checks good. Advised that in event of persistent symptom return with hi and control.

Near Leander, TX 78641

Lou

Job Details: 02/07/2019

WASHER WHIRLPOOL WTW8040DW0 "arrived on site to install previously diagnosed and ordered parts. Previous tech diagnosed the unit as needing a gearcase and clutch. I removed and replaced the gearcase/clutch and calibrated it. Tested unit and it operated as designed. No water leaks observed during service, job completed."

Near Waco, TX 76705

Steve C.

Job Details: 02/07/2019

WASHER MAYTAG MVWX655DW1 "Arrived on site for the unit is making a loud grinding noise. Tested the unit and found a grinding noise is coming from the cam and gear case. Also found the wash plate is starting to rust and worn out. Replace the cam, gear case, and the wash plate and tested the unit. Unit works properly and all water connections were dry at the time of service."

Near Killeen, TX 76542

Job Details: 02/07/2019

MICROWAVE GE JNM1541DM5BB Arrived to install previously ordered parts. Reassembled the microwave after installing parts and unit tested as designed.JOB COMPLETE

Near Temple, TX 76502

Arthur B.

Job Details: 02/07/2019

REFRIGERATOR JENN-AIR JFX2897DRM02 Arrived onsite for customer complaint of french door refrigerator making loud noises. Removed evaporator cover on freezer section and found ice build up near evaporator fan. Removed all ice build up from evaporator fan area. Reassembled and tested. Unit is now quiet as intended. No other issues found. All water connections were dry at time of service.

Near Austin, TX 78746

Luis

Job Details: 02/07/2019

REFRIGERATOR KITCHENAID KFIS29BBMS00 "Arrived on site or ice build up in fresh food. Found ice build up behind icemaker housing and on housing. Per service pointer will need to install control kit and adapter kit.

Near New Braunfels, TX 78132

Diego G.

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL GC3NHAXVY01 Arrived on site. Check for no cooling issues. Found main control board not sending power out to components on the refrigerator. Will need main control board to repair unit. Customer also have an issues with icemaker not working. Sensors checked OK all indications show bad icemaker. Will have icemaker on hand if customer wants to go with repair next time. Office to rescheduleFile#7724087636; ordrng 1 W10823803 (CONTROL )

Near New Braunfels, TX 78132

Diego G.

Job Details: 02/07/2019

Near New Braunfels, TX 78132

Diego G.

Job Details: 02/07/2019

Near Dripping Springs, TX 78620

Leonardo

Job Details: 02/07/2019

VENTHOOD KITCHENAID KXU8036YSS1 Arrived on site to replaced housing. Replaced housing test unit and unit test good job complete.

Near Georgetown, TX 78633

Lou

Job Details: 02/07/2019

DISHWASHER WHIRLPOOL WDTA50SAHZ0 "arrived on site to install previously diagnosed and ordered part. I removed the wheels from the old lower rack and installed them to the new rack and tested the rack and it operated as designed. The old rack had a cut in the racking and was beginning to rust. No water leaks observed during service, job completed."

Near Georgetown, TX 78628

Lou

Job Details: 02/07/2019

REFRIGERATOR GE DSHF9NGYBCBB "arrived on site to inspect refrigerator ice maker not working. Upon further inspection, I found that the fill tube was frozen. I checked the temps in the fc=34 degrees & rc =53 degrees. I found that the evaporator had a good frost pattern but the Evap fan motor sounded weak which is the reason for the high temps. I am ordering the Evap fan motor and scheduled return service for 02/08/19. Office to refund fees from prior service. No water leaks observed during service.; ordrng 1 WR60X10307 (mtr dc evap fan asm)"

Near New Braunfels, TX 78130

Robert

Job Details: 02/07/2019

WASHER WHIRLPOOL WFW92HEFW0 Arrived on job for complaints of not completing cycle. Found code display for over load. Changed settings for water soft and soap strength.

Near Leander, TX 78641

Cliff

Job Details: 02/07/2019

OVEN WHIRLPOOL WOD93EC0AS05 Arrived on site to test calibration on oven. Found upper oven 10° too low and the lower oven 20° too low. Reset calibration settings to compensate for offset. Tested unit and found all is functioning properly at this time.

Near Round Rock, TX 78665

Tyler B.

Job Details: 02/07/2019

DISHWASHER WHIRLPOOL DU1055XTVQ1 "Arrived back on site for same complaint, customer decided to proceed with repair. Replaced control panel and tested good no leaks on site .

Near Cedar Park, TX 78613

Lou

Job Details: 02/07/2019

REFRIGERATOR KITCHENAID KRFC704FSS00 "arrived on site to install previously diagnosed and ordered part. Removed and replaced the UI and tested unit. Unit operated as designed. No water leaks observed during service, job completed."

Near Austin, TX 78733

Scott

Job Details: 02/07/2019

RANGE MAYTAG MER6770AAC Arrived on site for small front left burner not coming on . Found both switch and burner scorched . Replaced both and unit is now heating up . Job complete .

Near Georgetown, TX 78628

Lou

Job Details: 02/07/2019

MICROWAVE WHIRLPOOL WMH32519FS0 "arrived on site to inspect microwave display going off. Upon further inspection, I found the display not on but when opening the door, the inner light came on. While testing the unit by opening /closing the door, the inner light began to flicker but the display never came back on. I attempted to operate the unit by pressing a time and start and nothing happened. I removed all three switches/both interlocks and the main control and tested. The unit operated as designed. I advised the customer of my findings and repairs. Job completed."

Near Austin, TX 78701

Luis

Job Details: 02/07/2019

ICE MACHINE KITCHENAID KUIC18NNTS1 "Arrived on site for no ice. Ran diagnostics found weak water flow to reservoir diagnosed failed smart valve. Removed failed valve,installed new valve,checked water connections no leaks,powered unit on good water flow to reservoir.

Near Austin, TX 78741

Kevin

Job Details: 02/07/2019

WASHER WHIRLPOOL WTW4800BQ "Arrived on site and inspected washer and found drain pump is running constantly. Set washer into diagnostic cycle and ran all functions in manual And everything is working properly. Reset control board with a calibration and ensured pressure hose was clear, drain pump has stopped. Request of the customer attempt to do some laundry, if issue persists will need to replace the control board. No water leaks from connections at time of service, job complete."

Near Leander, TX 78641

Lou

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRS325SDHZ01 "arrived on site to inspect refrigerator ice maker not working. I tested temps in the fc=34, and rc=44. Found the unit not leveled or squared. I tested the ice maker and it operated as designed. I found a large amount of frost on the Evap. I defrosted the unit and it defrosted as designed. I leveled and squared the unit and am ordering the UI and Evap harness. Scheduled return service for 02/08/19. No water leaks observed during service.; ordrng 1 W10911770 (HARNS-WIRE) and 1 W11214887 (CONTROL-ELEC)"

Near Austin, TX 78733

Scott

Job Details: 02/07/2019

WASHER MAYTAG MVWB835DW3 "Arrived on site ,replaced console and control . Ran calibration and service test . Both checked normal. No water leaks detected at time of service job complete ."

Near Leander, TX 78641

Cliff

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRS325SDHZ01 Arrived on site to diagnose a refrigerator that is not cooling properly. Tested unit and found only partial frost pattern on evaporator indicating failed compressor. Compressor and UV dryer will need to be installed to complete repairs. Office will need to set a return appointment for two hour job.; ordrng 1 CNOTES (2 HOUR JOB) and 1 SF8404 (STUB) and 1 W10143759 (drier (service)) and 1 W10507884 (compressor)

Near Hutto, TX 78634

Wesley

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WSF26C3EXW01 Arrived on site and found unit operating with huge airgap. Used heat gun and silicone to correct airgap. Unit is now operating as designed. Possible control complications. Customer will call back in event of repeat symptom.

Near Austin, TX 78736

Kevin

Job Details: 02/07/2019

DRYER MAYTAG MED8200FW0 "Arrived on site and found airflow error code, found what customer is experiencing was anti-static function during the last eight minutes of a dry cycle recommended that vent to exterior be cleared to prevent any further damage no further repair is required at this time, job complete"

Near New Braunfels, TX 78130

Leonardo

Job Details: 02/07/2019

DISHWASHER MAYTAG MDB4949SDM2 Arrived on site to test unit for bottom wheels coming off. Test unit and found broken wheel on left and right side. Replaced 3 wheels test unit and unit test good. Customer also said upper rack rusted found rust on rack ordering new rack W10918525. Office to reschedule ; ordrng 1 W10918525 (UPPER RACK )

Near Copperas Cove, TX 76522

Job Details: 02/07/2019

REFRIGERATOR WHIRLPOOL WRX735SDHV00 Arrived to inspect refrigerator freezing items in refrigerator. I confirmed the complaint and instructed the customer about the damper and instructed them on the unit. All water lines were dry at the time of service.JOB COMPLETE