Service History 15 - Appliance Express

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Georgetown, Texas 78628

Brandon B

Job Details: 12/16/2025

Arrived on site for a washer WTW4855HW3 not cycling. I found an error for pressure sensing. Unit was draining and wouldn't cycle. I found no visible issues with the pressure hose so I replaced the control w11607637. I calibrated and tested in factory mode. Unit is operating as designed now. No leaks detected while on site.

We serviced a

KITCHENAID DISHWASHER

Model KDTM804KPS2

Near Cedar Park, Texas 78613

Daniel A

Job Details: 12/16/2025

"Arrived on site to inspect dishwasher model KDTM804KPS2 displaying H20 error and not filling with water. Upon further inspection, I verified proper voltage to the valve and proper water supply. I tested the valve and found that it had failed electrically. I replaced the valve and reassembled and tested the unit and it is now operating as designed. No water leaks observed during service. W11434044"

We serviced a

WHIRLPOOL DISHWASHER

Model WDF530PAYM3

Near Harker Heights, Texas 76548

Andrew P

Job Details: 12/16/2025

"Dishwasher model WDF530PAYM3. Removed and replaced wash motor wpw1048280, user interface control wpw1062967 and main control board w10473200 Tested dishwasher; it filled, washed, and drained. New leaks detected at time of service."

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW3

Near Fort Cavazos, Texas 76544

Andrew P

Job Details: 12/16/2025

"WTW4816FW3. Customers reported that the agitator just kind of flew apart. Verified that the top half of the agitator was broken off. Removed and replaced the bottom half of the agitator assembly 285565. Ran unit through auto test. Unit filled, agitated, drained, and spun. Washer working as intended. No leaks detected at time of service."

We serviced a

WHIRLPOOL OVEN

Model WOEC3030LS01

Near Georgetown, Texas 78633

Andrew P

Job Details: 12/16/2025

Whirlpool electric oven MODEL WOEC3030LS. Ohms out oven sensor: 1350 . Internal oven temperature at room temperature approximately 75?F; seems okay. Set oven to 350?F but only reached 250?F (100?F off). Both bake and broil element were cycling on and off during preheat elements are working fine. Ordering control console (includes relay board). Will install new oven sensor and control console on return. Visit rescheduled for Thursday.; ordrng 1 W11659260 (Control console)

We serviced a

KITCHENAID OVEN

Model KEHC309JSS08

Near Georgetown, Texas 78633

Andrew P

Job Details: 12/16/2025

KEHC309JSS08. Verified that the lights for the oven and microwave are out. Removed and replaced microwave light wpw1044040 and both oven lights wp4452164 Tested lights and they are operating as designed.

We serviced a

WHIRLPOOL REFRIGERATOR

Model KRSC700HPS06

Near Georgetown, Texas 78633

Andrew P

Job Details: 12/16/2025

"KRSC700HPS06: Removed and replaced refrigerator cabinet door check w11395841 and badge w10839792. Door and there were no dings, no dents or scratches. Customer approved. Door no leaks detected time of service."

We serviced a

WHIRLPOOL DRYER

Model WGD5605MW0

Near Austin, Texas 78703

James K

Job Details: 12/16/2025

"Arrived on site for unit not heating properly. Upon arrival, checked airflow with tester and found Good airflow for gas dryer. No error codes stored. Customer stated dryer needed to be run more than once for clothes to dry. Proceeded to check moisture sensor with towel and found unit cycling correctly. Read temp and unit is running 170F on medium high heat. Advised customer to take EcoBoost off. Customer agreed. Unit is functioning as designed. No parts needed"

We serviced a

WHIRLPOOL WASHER

Model WFW560CHW4

Near Austin, Texas 78731

James K

Job Details: 12/16/2025

"Arrived on site for unit not spinning. Upon arrival, customer stated when using Bulky and Towel setting, after cycle, clothes are still soaking wet. Proceeded to inspect settings and found Spin is off. Instructed customer on buttons can be accidentally pressed when reaching for something on top shelf. Customer agreed. Ran diagnostics and passed with no issues. Unit is functioning as designed. No water leaks detected at this time. No parts needed"

We serviced a

WHIRLPOOL DISHWASHER

Model WDF341PAPM2

Near Burnet, Texas 78611

Wesley

Job Details: 12/16/2025

"Arrived onsite and found unit had no power WDF341PAPM2. Traced power and found outlet under sink had backed out. Connected plug to outlet securely and tested, no error codes. Unit runs as designed. No parts. Advised customer on findings."

We serviced a

KITCHENAID ICE MACHINE

Model KUIX535HPS01

Near Burnet, Texas 78611

Wesley

Job Details: 12/16/2025

"Arrived onsite and found no production as a result of a bad fill valve low flow, just a trickle present. KUIX535HPS01 replaced fill valve w10897719. Unit is now operating as designed. Advised customer on repair."

We serviced a

MAYTAG WASHER

Model MTW6200RR0

Near Austin, Texas 78731

James K

Job Details: 12/16/2025

"Arrived on site for F5E3 Lid will not lock or unlock code. Upon arrival, started unit and found lock mechanism not working and started flashing code. Proceeded to replace W11789818 strike and W11670519 lid lock. Started unit and again and now has no issues starting. Ran diagnostics and calibration. Unit is functioning as designed. No water leaks detected at this time"

We serviced a

KITCHENAID MICROWAVE

Model KOCE500ESS23

Near Austin, Texas 78730

James K

Job Details: 12/16/2025

"Arrived on site to replace previously ordered part. Upon arrival, proceeded to replace W11578578 harness. Tested unit and now unit is functioning as designed ."

We serviced a

KITCHENAID OVEN

Model KOED530PSS00

Near Austin, Texas 78731

James K

Job Details: 12/16/2025

"Arrived on site for unit tripping breaker. Upon arrival, proceed to follow service pointer and removed ground from unit to perform burn off. Flash Broiled for 10 minutes and Baked max temp for an additional 20 minutes. Unit is pulling 35.8 to 36 max amps. Unit is on a 50 amp Square D GfCI breaker. Connected ground back onto unit and retested and did not trip breaker. Called Safety Team and spoke with Reece SR#21881325 to document call and no further action needed. Unit is functioning as designed. No parts needed. Builder not at property. No one available to sign"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS04

Near Belton, Texas 76513

Tyler

Job Details: 12/16/2025

"Arrived on site for refrigerator not cooling, on arrival confirmed issue and after further inspection I found a restriction in the dryer and not refrigerant pasing through. I replaced wpw10143759 and recharged system with 60z of r134a. Found unit working g as deisgned and informed customer to allow 24 hrs to stablize temps. Call complete"

We serviced a

WHIRLPOOL WASHER

Model WTW4957PW0

Near Temple, Texas 76504

Tyler

Job Details: 12/16/2025

"Arrived on site for washing machines stuck in drain loop cycle. On arrival, I confirmed failure and upon further inspection. I found units stuck and not able to enter diagnostics. I confirmed issue under service pointer and replace w 11608056 and found washer, working as designed with no leaks call complete."

We serviced a

WHIRLPOOL WASHER

Model WTW8127LC1

Near China Spring, Texas 76633

Tyler

Job Details: 12/16/2025

"Arrived on site for washing machine, not completing cycles and overfilling, and sometimes turning on in its own and filling up. On arrival, I confirmed failure and found F 8E 6 in diagnostics. But upon further inspection, I found the fabric softener, faucet switch was faulty, causing unit to kick on randomly on its own and fill both when in use and non-use. I inspected other hardware.The machine have found no failures except for the lid being broken. I am ordering the following parts along with the faucet and rescheduled customer for 12.19.25 W11470212 lid, w11569112 FS faucet, W11550898 bezel.; ordrng 1 W11470212 (Lid) and 1 w11569112 (Fs faucet) and 1 W11550898 (Bezel)"

We serviced a

MAYTAG DISHWASHER

Model MDB4949SKZ3

Near Buda, Texas 78610

Andrey

Job Details: 12/16/2025

"Arrived on site to diagnose F8E4 error code. Inspected the unit and found the drain pan beneath the dishwasher completely filled with clear water, with no evidence of suds. Removed all water from the base and ran the unit for testing. During operation, no active internal leaks were observed; however, inspection of the water inlet valve revealed a slow drip at the water supply connection. The water line connection at the inlet valve elbow was not sufficiently tightened, allowing water to gradually drip and accumulate in the base pan, triggering the F8E4 error. Tightened the water line connection securely and re-tested the unit through a full cycle. Unit operated normally with no further leaks observed. Unit is now running as designed. Job complete."

We serviced a

WHIRLPOOL MICROWAVE

Model WMH31017HS10

Near Kyle, Texas 78640

Andrey

Job Details: 12/16/2025

"Arrived on-site to test unit for not heating, tested unit found failed diode, replaced diode and tested unit is now running as designed job complete installed W11256462"

We serviced a

WHIRLPOOL DRYER

Model WGD4850HW2

Near Buda, Texas 78610

Andrey

Job Details: 12/16/2025

"Arrived on site to test unit for lint falling to to chute, removed chute and inspected blower housing and lint chute, found no restrictions, what ever fell off is already in house vent system, advised customer to get Dryer vent cleaners to remove restrictions if they are there, unit itself is working great, job complete no parts installed"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHM13

Near Kyle, Texas 78640

Andrey

Job Details: 12/16/2025

"Arrived on site to test unit for humming noise, tested unit found all noises are normal, nothing unusual, the humming noise that was concerning the customer was the evaporator fan running and according to them it was making this noise since they moved in, explained to customer that there hone has a open concept and it will sound louder then in other homes, customer stated that sometimes it does get louder, advised customer to monitor if issues persists then Evaporator fan will need to be replaced, at this time job complete no parts installed"

We serviced a

WHIRLPOOL DRYER

Model WED5010LW1

Near Kyle, Texas 78640

Andrey

Job Details: 12/16/2025

"Arrived on site to test unit for not working properly, customer stated that it only works sometimes and they will have to cycle power to get the UI lights to come on, tested unit found UI acting erratic, replaced console control and tested, unit is now running as designed job complete installed W11627521"

We serviced a

WHIRLPOOL MICROWAVE

Model WOC54EC0HS04

Near Leander, Texas 78641

Miguel

Job Details: 12/16/2025

"Arrived on site for microwave not heating. Removed oven from wall. Removed top panel. Found thermal fuse was blown. This is part of interlock switch, replaced interlock. Verified operation. Call complete. W11033422"

We serviced a

MAYTAG WASHER

Model MVWX655DW2

Near Cedar Park, Texas 78613

Miguel

Job Details: 12/16/2025

Arrived on site for washer just stuck in drain again. Unit was unplugged. Drain started at start up. Diagnostics shows f8e1. Checked pressure switch and it is clear. Replaced main control. Recalibrated and ran automatic test cycle.

We serviced a

WHIRLPOOL RANGE

Model WFC150M0JB3

Near Austin, Texas 78726

Miguel

Job Details: 12/16/2025

Arrived on site for oven range showing f3e0 flashing. This is a sensor error. Removed back panel. At sensor I had 1.1 k ohms. Followed the purple wires to the board and found 1.1k at connector. Found connector was not fully seated into the control. Properly connected harness. Cleared code. Verified operation. Call complete. No parts

We serviced a

JENN-AIR OVEN

Model JGRP436HL05

Near Kingsland, Texas 78639

Lou

Job Details: 12/16/2025

"Arrived on site to inspect range JGRP436HL05 oven broil not working. Upon further inspection, I tested the broil function and could hear the spark module clicking but there was no arcing coming from the broil ignitor. I verified continuity to the broil ignitor harness then removed and replaced the broil ignitor and retested. The unit is operating as designed and no gas leaks detected during service, job completed. W11355920"

We serviced a

WHIRLPOOL WASHER

Model WFW560CHW4

Near Austin, Texas 78726

Miguel

Job Details: 12/16/2025

"Arrived on site for washer not draining. Door is locked. Entered diagnostics and found f9e1, f0e2, f0e1. Found there is still water in tub. Went into test 4 and ran drain pump. Drain does activate but it drains very slowly. Ran. Drain u til all water was cleared. Door now unlocked. Pushed forward and accessed drain. Found debris blocking drain in fikter. Cleaned and cleared. Ran automatic test. Now all working properly. Call complete. No parts."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRB322DMBM05

Near Austin, Texas 78726

Miguel

Job Details: 12/16/2025

Arrived on site for freezer building up ice on the inside. Found temperature at 35 and zero. No ice build up found. Spoke with maintenance and he said they have thawed it out due to ice in freezer. Asked if it was isolated to back. He said it was on all the walls. Found freezer drawer difficult to close. Closers were not working i had to push close. Found ice built up around the rails. Cleaned and cleared and added some grease to slider. Verified freezer closers now working properly. Call complete. No parts. Tenant not home. No signature

We serviced a

MAYTAG DRYER

Model MED6230HW1

Near Kingsland, Texas 78639

Lou

Job Details: 12/16/2025

"Arrived on site to inspect dryer MED6230HW1 noises. Upon further inspection, the customer advised that the unit was making a clanking noise and then it stopped. I tested the unit and found it making a thumping noise. I disassembled the unit to find the tension pulley almost seized and found a screw inside the lint duct cover that was possibly caught in between the drum seal and the front bulkhead then eventually fell into the vent area. I cleaned the unit and removed and replaced the dryer repair kit (4 rollers, tension pulley roller and belt) and reassembled the unit. Retested and it is operating as designed. No lint observed at the end of service, job completed. 4392067"

We serviced a

MAYTAG DRYER

Model MED7230HC2

Near Austin, Texas 78734

Brandon

Job Details: 12/16/2025

"Arrived on site to look at model MED7230HC2 for customer complaint of unit not heating. Found issue with the element. I replaced element, unit tested good. Part used wp3387747"

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW3

Near Austin, Texas 78748

Brandon

Job Details: 12/16/2025

"Arrived on site to look at model WTW4816FW3 for customer complaint of unit not finishing cycles. Found inner basket not spinning properly due to gearcase shaft and drive block wear. Also found control not responding properly in diagnostic mode. Ordering gearcase, drive block, and control. ; ordrng 1 W11454741 (Gearcase) and 1 WP389140 (Drive block) and 1 W11603810 (Control) and 1 Cnote (Auth)"

We serviced a

WHIRLPOOL RANGE

Model WFG320M0MS0

Near Austin, Texas 78726

Miguel

Job Details: 12/16/2025

Arrived on site for burners now working properly. Found front burners barely turning on as is little or no gas is coming. Right side had a flame from under the cooktop. Removed cooktop and found front burner tubing broken for front left and right sides. Rear are bent as well. Ordering new tubing for cooktop. Cooktop is not to be used. Office will call to schedule. Tenant not home. No signature ; ordrng 1 W11590058 (Holder front left) and 1 W11590059 (Holder front right) and 1 W11590060 (Holder back) and 1 W11590248 (Holder back)

We serviced a

WHIRLPOOL WASHER

Model WTW4655JW2

Near Manchaca, Texas 78652

Brandon

Job Details: 12/16/2025

"Arrived on site to look at model WTW4655JW2 for customer complaint of unit running drain pump constantly. I found issue with the control board. I replaced control under S153EB, unit tested good. No leaks after repair. Part used w11607637"

We serviced a

WHIRLPOOL VENTHOOD

Model WVU37UC0FS1

Near Austin, Texas 78701

James K

Job Details: 12/16/2025

"Arrived to 2314 to replace previously ordered part. Upon arrival, proceeded to replace W11100651 blower. Tested unit and now unit is functioning as designed."

We serviced a

WHIRLPOOL DRYER

Model WED4950HW0

Near Austin, Texas 78704

James K

Job Details: 12/16/2025

"Arrived on site for unit not spinning. Upon arrival, started unit and found drum not spinning and unit making clanking noise. Upon disassembly found motor pulley loose. Proceeded to replace WP694089 wheel and 279827 motor. Tested unit and now unit is functioning as designed. Property coordinator not on site. Informed via text. No signature"

We serviced a

KITCHENAID REFRIGERATOR

Model KRFC704FPS04

Near Pflugerville, Texas 78660

David Z

Job Details: 12/16/2025

"Arrived on site to follow up on refrigerator KRFC704FPS04 that was not making ice still. On arrival took temps and found FC at -12, RC 37, and ice box 78. I checked the icebox and found the fan is not running at all. I could not force it on during normal operation, or in diagnostics. This would also explain the ice melting / clumping. I talked with PR about the repair, and approved replacing the icebox fan at no cost. Set return for 12/19. ; ordrng 1 W11407678 (Icebox Fan)"

We serviced a

WHIRLPOOL MICROWAVE

Model WMMS3130RB02

Near Pflugerville, Texas 78660

David Z

Job Details: 12/16/2025

"Arrived on site for microwave WMMS3130RB02 not heating. Tested unit and confirmed loud magnetron buzz and electrical odor. Based on noise, HV system needed replacement. Magnetron had loose magnet as well. Installed new capacitor WPW10574736, magnetron W11753208, diode W11256462. Tested unit and confirmed buzzing gone and cup of water heated correctly. Repair completed. Maintenance left prior to signing ticket."

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730HAMZ1

Near Round Rock, Texas 78665

Justin

Job Details: 12/16/2025

"Arrived on site to repair previously diagnosed issue unit control failure ,latch failure and stop dispenser need to be replaced. Replaced control, latch and dispenser and tested. Unit is now functioning properly and as designed to. No leaks present at this time job completed"

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW3

Near McDade, Texas 78650

Matthew

Job Details: 12/16/2025

Arrived on site for washer WTW4816FW3 running and having to unplug. Powered unit and drain pump kicked on. Ran diagnostics and found F3E1 Pressure system failure and would not reset. Replaced control W11603810 and calibrated. Unit is now functioning properly. Job complete

We serviced a

WHIRLPOOL DRYER

Model WED5620HW2

Near Austin, Texas 78726

Miguel

Job Details: 12/16/2025

Arrived on site for dryer making a noise. Found noise happens during spin. Removed components. Tested and found motor is making a noise when spun by hand. Blower is cracked. Replaced motor and blower. Verified operation. All working normal. Call complete. W11364931

We serviced a

MAYTAG WASHER

Model MVW5430MW1

Near Pflugerville, Texas 78660

David Z

Job Details: 12/16/2025

"Arrived on site to follow up on washer MVW5430MW1 not spinning out clothes or finishing cycles. Ran diagnostic and found error code for Slow Fill. Tested the valves and found they were filling, but the valve was making a very loud buzzing sound and the cold side seemed to be slowing down. If the valve is overheating or failing, it may be timing out the rinse and causing the cycle to stop. The control may also not be properly reading pressure and throwing the error. To resolve, replaced both the valve W11513255 and control W11627413. Ran unit and confirmed noise was gone and water level/fill rate seemed normal. Unit working as designed. No water leaks detected. Strongly cautioned customer on loading and balance, as this will also stop loads from finishing. The load currently in the washer was banging around due to imbalance. Call completed."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WSR57R18DM05

Near Pflugerville, Texas 78660

David Z

Job Details: 12/16/2025

"Arrived on site for refrigerator WSR57R18DM05 in need of sealed system repair. Tapped system and found no refrigerant present, indicating leak. Removed compressor and drier from rear; no leak evidence visible, likely in evaporator. Replaced evaporator with new W11572047. Replaced compressor W11578209, drier WPW10143759, access valve W11506635. Vacuumed down unit and verified -30 HG vac; vac held. Charged to spec. Tested unit and confirmed cooling present. Repair completed"

We serviced a

KITCHENAID DISHWASHER

Model KDPE234GPS0

Near Temple, Texas 76501

Robert

Job Details: 12/16/2025

"KDPE234GPS0 Arrived on site from previous visit to install parts. I installed the valve, door latch, switch, lever,housing, nut, and retainer. Then, tested product is working as its designed with no water leaks visible from the main water supply."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRSF5536RZ00

Near Temple, Texas 76502

Robert

Job Details: 12/16/2025

"WRSF5536RZ00 Arrived on site for a refrigerator not making ice or despenseing ice. On arrival, I saw the icemaker is working its just not despenseing. Further inspection I found ice bucket has failed so has other parts. I ordered ice bucket, coupling, washer,chute,and ice door. Returning parts just in case needed. No water leaks are visible from the main water supply. Office, please reschedule the client. ; ordrng 1 W11759677 (Ice bucket) and 1 WP2220458 (Coupling) and 1 WP2305382 (Washer) and 1 W11573761 (Chute) and 1 W11202789 (Motor) and 1 W11098702 (Ice door)"

We serviced a

JENN-AIR DISHWASHER

Model JDPSG244PS0

Near Woodway, Texas 76712

Robert

Job Details: 12/16/2025

JDPSG244PS0 Arrived on site for a dishwasher with error code F7E2 On arrival I verified the error code a failed motor. I replaced the motor then tested the product is working as its designed with no water leaks visible from the main water supply.

We serviced a

MAYTAG WASHER

Model MVWX655DW1

Near Woodway, Texas 76712

Robert

Job Details: 12/16/2025

"MVWX655DW1 Arrived on site for a washer, making loud noises and not working. On arrival, I ran diagnostic and error code showed up. I tested and it's did hear the splutch making nosies. Further inspection I found the splutch has failed the belt was loose and the actuator had incorrect readings. I replaced all three calibrated then tested product is working as its designed no water leaks visible from the main water supply. No noises either."

We serviced a

WHIRLPOOL WASHER

Model WTW5105HW2

Near Taylor, Texas 76574

David Z

Job Details: 12/16/2025

"Arrived on site to follow up on washer WTW5105HW2 not progressing in cycles. Tested unit and found error F7E3. Tested shifter and spin; unit would not shift and only moved 1/4 turn at a time in normal cycle. Checked tach signal: read 0 with spinning basket, or intermittent RPMs if shaken, indicating short or break in wiring harness. Replaced run capacitor W11395618 due to limited agitation. Unit still did not spin with new capacitor. Ordered wiring harness and possibly associated parts. Set return for 12/23; customer requested sooner service if available. NO WATER LEAKS OBSERVED DURING SERVICE.; ordrng 1 W11591637 (Wiring Harness) and 1 W11478519 (Console) and 1 W11481722 (Shifter)"

We serviced a

KITCHENAID RANGE

Model KFGC506JSS01

Near Round Mountain, Texas 78663

Wesley

Job Details: 12/16/2025

Arrived onsite KFGC506JSS01 for rattle from fan friction after unit heats up. Attempted to make adjustments while hot. Issue persisting. Ordering convection fan parts to repair. Run without convection baffle is time frame is not met. ; ordrng 1 W10819914 (Convection fan) and 1 W10794042 (Fan nut) and 1 W11662207 (Convection baffle)

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Marble Falls, Texas 78654

Wesley

Job Details: 12/16/2025

"Arrived onsite unit 321 for continuous drain symptom, f3e1, repaired washer by replacing control W11607637. Unit tests well and calibrated. No leaks at time of service. No signer available"

We serviced a

MAYTAG DRYER

Model MED4500MW0

Near Hutto, Texas 78634

Justin

Job Details: 12/16/2025

Arrived on site for unit having long dry time and door not latching. Inspected unit found door catch had fallen apart replaced catch door is now functioning properly. Tested air flow with vent on found airflow restriction. Removed vent from unit and tested airflow again unit no longer has a restriction. Informed customer he will need to have external vents professionally to resolve long dry times. Job completed

We serviced a

MAYTAG DRYER

Model MED4500MW0

Near Hutto, Texas 78634

Justin

Job Details: 12/16/2025

Arrived on site for unit not drying. Upon arrival customer informed me unit does heat just has a long dry time takes to cycles. Tested air flow with vent on found restriction removes vent and tested unit no longer has a restriction. Informed customer he has a air flow restriction in hit external pipes and will need to have them professionally cleaned to resolve air flow issue causing the long dry times. Customer agreed to having vents cleaned professionally job completed

We serviced a

MAYTAG WASHER

Model MVW6500MBK1

Near Pflugerville, Texas 78660

Justin

Job Details: 12/16/2025

Arrived on site customer had stated hearing something fall off at the bottom. Inspected unit found shield just laying on the ground. Shield screw holes had been screwed through causing plastic to break. Replaced shield and tested unit is now functioning properly and as designed to. No leaks present at this time job completed

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF757SDHZ03

Near Pflugerville, Texas 78660

Justin

Job Details: 12/16/2025

Arrived on site for init ui no longer beeping. Inspected unit and did find ui does not beep anymore speakers went out. Ordering ui office to reschedule ; ordrng 1 W11636544 (Ui)

We serviced a

WHIRLPOOL OVEN

Model WFG500M4HS0

Near Austin, Texas 78756

Scott

Job Details: 12/16/2025

Arrived on site for oven not heating . Top burners are getting gas and igniting . Igniter is glowing and pulling correct amps . Found safty switch on regulator in off position . Flipped lever to on . Unit is now igniting and heating g properly . No gas leaks detected at time of service. Job complete

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS335SDHM07

Near Austin, Texas 78756

Scott

Job Details: 12/16/2025

Arrived on. Site for fridge not dispensing water . Unit is making ice . Found water is dispensing at time of visit . Temps to fridge are set to coldest setting . Almost no food in either section . Belive reservoir tube is freezing over. Bumped temps up to warmer setting . Ice maker is testing normal. No water leaks detected at time of service. Job complete

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS331SDHM08

Near Austin, Texas 78724

Scott

Job Details: 12/16/2025

Arrived on site for fridge not making ice or dispense sing water . Found ice bin full . Ran harvest test on IM . Icemaker harvested and filled . Found no water dispensing at door . Found temps are set too cold . Detected water reservoir in fresh food section. Unit is now dispensing water at door. Advised not to set temps too cold . No water leaks detected at time of service. Job complete

We serviced a

WHIRLPOOL WASHER

Model WTW4850HW3

Near Austin, Texas 78724

Scott

Job Details: 12/16/2025

Arrived on site for washer stuck in drain mode . Ran diagnostics got pressure szensor error code. Replaced control per service ice pointer . Ran calibration and test wash . All checked normal. No water leaks detected at time of service. Job complete

We serviced a

WHIRLPOOL WASHER

Model WFW560CHW4

Near Austin, Texas 78724

Scott

Job Details: 12/16/2025

"Arrived on site for washer vibrating and noisy. Ran diagnostics got no error codes. Unit passed test wash , during spin there was a slight vibration . Found unit still has shipping bolts in . Unit is stacked . Talked to lead maintenance, they are going to remove unit and remove shipping bolts . No water leaks detected at time of service. Job complete"

We serviced a

WHIRLPOOL RANGE

Model WFES3030RW0

Near Bellmead, Texas 76705

Robert

Job Details: 12/16/2025

"WFES3030RW0 Arrived on site for a range back right burner not working correctly. On arrival, I found the left back burner out as well I ordered element and switch also the control board. Returning parts will be needed. I rescheduled the client for 12/19/25; ordrng 1 W11171119 (Left back burners) and 1 W10911303 (Left back switch) and 1 W11696067 (Control)"

We serviced a

WHIRLPOOL WASHER

Model WTW4815EW1

Near Austin, Texas 78741

Joe Z

Job Details: 12/16/2025

"Arrived on site to apartment 2201. For washer WTW4815EW1. This is a tenant owned machine with issue of fills, doesnt spin and makes a noise. Upon arrival , ran diagnostics and get error codes F7-E6 motor fault, and F7-E5 shifter fault. Inspected unit and and found cam an actuator have failed. Replaced cam W10721967 and actuator W10913953. Test unit and is operating as designed. No leaks present. Job complete"

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ0

Near Austin, Texas 78741

Joe Z

Job Details: 12/16/2025

"Arrived on site for dishwasher WDT750SAKZ0 with issue of leaving water from front of door. Upon arrival, customer states that it begins leaking about midway through the cycle. Ran a normal cycle. Unit fills and begins washing. Inspected all door seal, hoses, and areas of tub around heater and sump for leaks and none present. During cycle, unit drained correctly into disposal. Cycle continued operating"

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730HAMZ0

Near Austin, Texas 78724

Scott

Job Details: 12/16/2025

"Arrived on site , replaced sump and motor . Ran diagnostics, all checked normal. Nomwater leaks detected at time of service. Job complete"

We serviced a

WHIRLPOOL RANGE

Model WFES3530RS0

Near Austin, Texas 78754

Justin

Job Details: 12/16/2025

Arrived on site for front right burner not turning on all the way only small part would come on. Checked voltage at switch found good switch has failed. Replaced switch and tested unit is now functioning properly and as designed to job completed

We serviced a

MAYTAG WASHER

Model MVW4505MW1

Near Austin, Texas 78754

Justin

Job Details: 12/16/2025

Arrived on site for unit not draining. Upon arrival inspected unit ran diagnostics found long drain error. Inspected underneath at wire harness and found broken ro drain pump. Replaced wire harness and tested unit is now functioning properly and as designed to. No leaks present at this time job completed

We serviced a

WHIRLPOOL WASHER

Model WTW5105HC3

Near Elgin, Texas 78621

Matthew

Job Details: 12/16/2025

"Arrived onsite for washer WTW5105HC3 giving F7E1 error. Inspected and found cam nut came loose and caused belt to jump pulley. Unit would not agitate or spin. Customer also stated unit was leaking after previous repair. Inspected and found leak coming from inlet assembly, not any parts that were replaced by the technician. Secured cam and belt and tested. Found gearcase is needed. Given repair price for gearcase and valve assembly, customer is considering replacing the unit."

We serviced a

WHIRLPOOL DRYER

Model WED5520SQ0

Near Elgin, Texas 78621

Matthew

Job Details: 12/16/2025

Arrived onsite for dryer WED5520SQ0 not starting. Inspected and found door switch broken. Replaced switch WP3406107. Tested and unit is now functioning properly. Job complete

We serviced a

WHIRLPOOL RANGE

Model WFG320M0MS0

Near Manor, Texas 78653

Matthew

Job Details: 12/16/2025

Arrived onsite for range WFG320M0MS0 door glass coming loose. Inspected and found glass brackets came loose. Adjusted C-clamps and secured door glass. Unit is now functioning properly. Job complete.

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Manor, Texas 78653

Matthew

Job Details: 12/16/2025

Arrived onsite for washer WTW4855HW3 drain pump running continuously. Plugged unit in and drain pump kicked on. Stored error for pressure system failure. Replaced control but while trying to calibrate found control was defective. Ordering control. Office to reschedule. ; ordrng 1 W11607637 (Control)

We serviced a

WHIRLPOOL DISHWASHER

Model WDT550SAPZ00

Near Manor, Texas 78653

Matthew

Job Details: 12/16/2025

"Arrived onsite for unit beepingand not starting cycle. Found stored error code 7/2, 4/3. Motor is locked. Disassembled and had to cut off hose clamps. Need to order replacement clamps . Also ordering heat pump section of assembly. Left water and electricity off. Notified maintenance not to test as unit will leak. Ordering clamps and heater pump assembly. Office to reschedule ; ordrng 4 W10783615 (Hose clamps)s and 1 W11690626 (Heater pump)"

We serviced a

WHIRLPOOL WASHER

Model WFC682CLW0

Near Seguin, Texas 78155

Tim M

Job Details: 12/16/2025

"Arrived on site to test unit WFC682CLW0 for error code. Upon arrival customer stated unit flashed 5G error and would not complete cycle. Entered service mode and found F0E2 (overload) error code stored; also noted standing water in tub. Cleared code and engaged drain-and-spin; water flow pulsed and weak. Removed filter and found it heavily clogged. Cleared restriction and reinstalled filter. Ran full test cycle; all components engaged correctly with strong water flow. Advised customer on proper load sizes to prevent imbalance and overload. Unit is now running as designed, no leaks detected, no parts installed, job complete."

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Austin, Texas 78757

Andrew R

Job Details: 12/16/2025

Arrived onsite for washer pump running. I confirmed a F3E1 pressure sensor failure present and drain pump running when plugged in. Under the service pointer S153EB I replaced the control and unit now tests as designed. Call complete. Installed W11607637 control.

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Austin, Texas 78757

Andrew R

Job Details: 12/16/2025

We serviced a

WHIRLPOOL DISHWASHER

Model WDT531HAPM0

Near Seguin, Texas 78155

Tim M

Job Details: 12/16/2025

"Arrived on site to test unit WDT531HAPM0 for not drying. Upon arrival customer stated unit does not dry dishes. Entered service mode, no stored error codes. Ran full test cycle; unit filled, washed, drained, and heating element engaged properly. Demonstrated element reaching full temperature to customer. Recommended consistent use of rinse aid to improve drying performance. Customer will be purchasing. Unit is running as designed, no leaks detected, no parts installed, job complete."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS555SIHZ06

Near Marion, Texas 78124

Tim M

Job Details: 12/16/2025

"Arrived on site to replace previously diagnosed part. Upon arrival installed RC door bin (W11239961). Tested door operation and bin fitment; secure with no movement. Unit is now functioning as designed, no leaks detected, job complete."

We serviced a

WHIRLPOOL RANGE

Model WFE775H0HZ5

Near New Braunfels, Texas 78130

Tim M

Job Details: 12/16/2025

"Arrived on site to test unit WFE775H0HZ5 for tripping breaker. Upon arrival customer stated breaker trips during every preheat. Engaged bake cycle; breaker tripped. Inspected wiring and connections, all tight with no shorts. Found old-style bake element installed. Replaced bake element (W10779716). Retested multiple cycles; breaker no longer trips and unit heats normally. Spoke to maintenance, breaker replacement scheduled tomorrow and they will run full burn-off to complete conditioning. Unit is running as designed, job complete."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT138FFDM03

Near Austin, Texas 78741

Luis

Job Details: 12/16/2025

"Arrived on site. Removed compressor cover found refrigerant leak at discharge port connection on compressor diagnosed a defective compressor. Removed defective compressor replaced compressor and drier vacuumed system down unit kept vacuum recharged system to manufacture spec powered unit on checked low side pressure good, powered off let pressure equalize no leaks powered unit back on checked evaporator good frost formation. W11727248,w11506635"

We serviced a

WHIRLPOOL RANGE

Model WEE515S0LS2

Near Austin, Texas 78744

Joe Z

Job Details: 12/16/2025

"Arrived on site to apartment 5101 for Range WEE51S0LS2 with issue of keypad not operating correctly. Upon arrival, test unit and found several keys are not responding. Need to replace ui control ; ordrng 1 W11747115 (Ui Control)"

We serviced a

WHIRLPOOL DRYER

Model WED4815EW1

Near Leander, Texas 78628

Daniel A

Job Details: 12/16/2025

Arrived on site to inspect dryer model WED4815EW1 with not power. Upon further inspection I found that the circuit breaker was tripped. I gained access to the terminal block and found that the dryer neutral and ground connections were swapped. I verified that this was causing the breaker to trip. I corrected the wiring at the terminal block and cycled the breaker and tested the unit and it is now operating as designed.

We serviced a

WHIRLPOOL VENTHOOD

Model UXT5536AAS4

Near New Braunfels, Texas 78130

Tim M

Job Details: 12/16/2025

"Arrived on site to test unit UXT5536AAS4 for controls not working and dripping oil. Upon arrival tested operation; buttons do not latch, motor engages only while pressed and stops upon release. Oil dripping from motor housing. Unit requires replacement of control panel and blower motor. Ordering parts, no parts installed, rescheduled for 12/19.; ordrng 1 WPW10291577 (Blower motor)"

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Andice, Texas 78628

Daniel A

Job Details: 12/16/2025

"Arrived on site to inspect washer model WTW4855HW3 continuously draining unless unplugged. Upon further inspection, I placed the unit into service mode and observed error code F3E1. I checked the condition of the pressure hose and found no obstructions or damage. The control has a failed pressure sensor, which is causing it to drain continuously. I replaced the control and calibrated and tested the machine. The machine is now operating as designed. No water leaks observed during service. W11607637"

We serviced a

WHIRLPOOL WASHER

Model WTW4957PW0

Near Meridian, Texas 76665

Tyler

Job Details: 12/16/2025

"Arrived on Site for washer needing control. On arrival found f5e1 in diagnostics. Found latch intermittently locking and sometimes would be unlocked during normal wash when indicator light was red. I replaced w11608056 control & w11307244 lid lock, tested washer amd found it working as designed with no leaks. Call complete"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS588FIHZ04

Near Austin, Texas 78738

Luis

Job Details: 12/16/2025

"Arrived on site. Installed shelf,installed drawer,repaired cracked liner. 482395,wpw10463650,8201700"

We serviced a

KITCHENAID REFRIGERATOR

Model KBSN708MPS00

Near Dripping Springs, Texas 78620

Luis

Job Details: 12/16/2025

"Arrived on site for noise complaint and no cool in fresh good section. Found evaporator incased in ice,fan making a rattling noise but is running,ran diagnostic fans ran,ran heater waited 10 min heater never powered on diagnosed a defective heater ordering heater and fan assembly; ordrng 1 W11626107 (Heater) and 1 W11631626 (Evap fan)"

We serviced a

WHIRLPOOL OVEN

Model WOES3030LS01

Near Georgetown, Texas 78628

Brandon B

Job Details: 12/15/2025

Arrived on site for an oven WOES3030LS01 not heating to 350 degrees. I heated it to 350 in bake mode. Unit pre-heated to 370 then stayed between 345 to 355. Unit is operating as designed. Nobody available to sign.

We serviced a

WHIRLPOOL WASHER

Model WTW5000DW2

Near Liberty Hill, Texas 78642

Brandon B

Job Details: 12/15/2025

"Arrived on site to install ordered parts on a washer WTW5000DW2. I installed the capacitor w11395618, actuator w1913953, belt w11239857, splutch w10721967, gearcase w11454734, hub nut w10528947, washplate w10752283 and hub nut w10528947. I calibrated and tested in factory mode. Unit is operating as designed. No leaks detected while on site."

We serviced a

JENN-AIR OVEN

Model JJW3430LL01

Near Liberty Hill, Texas 78642

Brandon B

Job Details: 12/15/2025

Arrived on site for an oven JJW3430LL01 getting a F2E1 error. I found it getting a lost contact with the ui error. The console was already ordered so I scheduled it for the 19th to install the console. ; schdld next appmnt for 12/19 FRI !

We serviced a

MAYTAG DRYER

Model MED6230HW3

Near Blanco, Texas 78606

Tim M

Job Details: 12/15/2025

"Arrived on site to test unit MED6230HW3 for noise. Upon arrival customer stated unit develops noise later in cycle. Engaged dry cycle; after 5 minutes scraping noise began from blower area. Gained access to internal components and found blower wheel cracked. Attempted removal, wheel has seized on motor shaft. Broke out damaged wheel and replaced motor (W11549461) and blower wheel (WP697772). Reassembled and tested multiple cycles; noise completely eliminated. Unit is now running as designed, job complete."

We serviced a

WHIRLPOOL OVEN

Model WFES3030RS0

Near San Marcos, Texas 78666

Andrey

Job Details: 12/15/2025

"Arrived on site to test unit for tripping breaker, inspected all wires and components, could not find any issues but unit is still tripping on preheat. Called safety to document, was advised to call tech line to see if any repairs can be further advised, no further recommendations where made be techline Case# from techline 21903246, call back to safety, per safety si ce unit is no longer in warranty, customer needs to call them to see what's the next step, at this time job complete no parts installed"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Austin, Texas 78736

Luis

Job Details: 12/15/2025

"Arrived on site for multiple issues. Customer showed video of noise per customer unit would be off no lights or not running then start up again. Checked evaporator cover no ice build up ran diagnostic all test passed,checked deli ui operation good no issues,left right door open toggled switch a couple times lights stayed on reading door open with switch engaged. Power cycled unit,unit would not power back on no lights or fans running. Unplugged for 5 min powered unit on unit powered on diagnosed communication issue with controls ordering a new ui,main control and power supply. ; ordrng 1 WPW10624574 (Power supply) and 1 W11330971 (Ui control) and 1 WPW10675033 (Main control) and 1 W10804160 (Led control)"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS335SDHM07

Near Kyle, Texas 78640

Andrey

Job Details: 12/15/2025

"Arrived on site to test unit for not cooling, tested unit could not get the compressor to engage, tested voltage found 12vac from control to inverter, replaced inverter and tested but compressor is still not starting, will need to replace compressor, access valve and dye drier office to reschedule installed W11546982; ordrng 1 W11557671 (Compressor) and 1 W11546692 (Evaporator) and 1 Accessvalve (Access valve) and 1 Dyedrier (Dye drier)"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHZ19

Near Kyle, Texas 78640

Andrey

Job Details: 12/15/2025

"Arrived on site to test unit for no water a dispersed, tested unit found unit is still making ice but water reservoir is frozen, noticed the temp is set to low and no one is living in the home yet, riased temps and advised customer to shut off unit to allow reservoir to thaw out, at this time job complete"

We serviced a

WHIRLPOOL WASHER

Model WTW4850BW0

Near Buda, Texas 78610

Andrey

Job Details: 12/15/2025

"Arrived on site to replace previously diagnosed control, replaced and calibrated unit , ran a diagnostic cycle all components are now testing good, unit is running as designed no leaks detected job complete installed W10627794"

We serviced a

WHIRLPOOL RANGE

Model WFG320M0MS0

Near Kyle, Texas 78640

Leonardo

Job Details: 12/15/2025

"Arrived on site to diagnose customer concern of range flames burning orange. Inspected and tested all surface burners by turning each burner on and observed that all burners were burning normally with blue flames and slight orange coloration at the tips. Questioned the customer regarding recent changes in the home environment and confirmed that a humidifier was in use. Explained to the customer that humidifiers can introduce minerals into the air which can cause temporary orange or yellow tips on gas flames. Advised the customer that this condition is normal, safe, and does not indicate a gas or appliance issue. Verified proper operation by checking the oven burner, which was observed to be burning solid blue with no abnormalities. No repairs needed at this time. Job complete."

We serviced a

WHIRLPOOL DRYER

Model WED8900BC0

Near Austin, Texas 78746

James K

Job Details: 12/15/2025

"Arrived on site to replace previously ordered parts upon arrival, proceeded to replace WP8544742 belt and WP8547157 belt. Upon reassembly, found grille has huge gapping, causing lint to buildup inside machine. Nonetheless, tested unit and unit is functioning as designed. Advised customer to use mesh bags for smaller under garments. Ordering W11117302 grille, W11129408 housing and W10120998 filter. Office to reschedule ; ordrng 1 W11117302 (Grille) and 1 W11129408 (Housing) and 1 W10120998 (Filter)"

We serviced a

WHIRLPOOL OVEN

Model WOS51EC0HS02

Near Austin, Texas 78724

Matthew

Job Details: 12/15/2025

"Arrived onsite for oven WOS51EC0HS02 , Could not get unit to stop heating so would unplug. Now unit not heating. Ran diagnostics but found no relevant codes. Ran components test and found cooling fan is functioning, ran bake and broil element and are functioning. Did not find unit having runaway temps. Did find that there was a service pointer for unit continuing to heat, needing software update. Unit was currently not connected to wifi. Connected unit and did update. Customer will monitor. If symptoms persist recommend ordering main control, sensor and UI."

We serviced a

MAYTAG WASHER

Model MVW7230HC1

Near Austin, Texas 78717

Scott

Job Details: 12/15/2025

"Arrived on site ,replaced gearcase ,clutch, slider. Ran calibration and diagnostics test wash. All. Checking normal. Nomwater leaks detected at time of service. Job complete"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF535SWBM00

Near Austin, Texas 78723

Andrew R

Job Details: 12/15/2025

Arrived onsite for refrigerator not making ice. I found no water in the ice mold. When inspecting the icemaker run i see the bail arm to slam down and continue running the cycle with no stop. Stripped gears in the motor is present. I replaced the icemaker and it is now filling and will make ice as temps were at 3 degrees and still dropping. Call complete. Installed W10884390 ICEMAKER.

We serviced a

WHIRLPOOL WASHER

Model WFW72HEDW0

Near Austin, Texas 78717

Scott

Job Details: 12/15/2025

Arrived on site for washer giving 3-1 error code . Ran diagnostics got only that code . Ran test wash and unit is draing normally . Getting good lots of suds . Pressure hose is in good shape . Replaced wl switch . Reran diagnostics all checked normal. No water leaks detected at time of service. Also advised on running a clean cycle periodically. Job complete

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FGSC2335TF5

Near Austin, Texas 78731

Daniel A

Job Details: 12/15/2025

"Arrived on site to inspect refrigerator not making ice. Upon futher inspection, I checked temperatures and measured 4 degrees FC and 37 degrees RC. I placed the unit into diagnostics and ran a test on the ice maker and found it to be cycling properly. I ran a water test and found there was no water coming into the ice tray. I gained access to the valve by pulling the fridge out onto my floor protector. I verified that the valve was operating fine. The issue is that the water line froze inside the cabinet and prevent water from getting into the ice tray. I informed the customer that the problem will need to be fixed by manually defrosting the refrigerator so the water line can thaw. No water leaks observed during service."

We serviced a

KITCHENAID MICROWAVE

Model KOCE500ESS23

Near Georgetown, Texas 78633

Lou

Job Details: 12/15/2025

"Arrived on site to install previously diagnosed and ordered part. Per the previous techs diagnosis, I was to remove and replace the magnetron. However, when I went to replace the part, I found the antennae damaged in the box. I contacted the office and advised of my findings and advised my customer that i am ordering another magnetron and our office will contact them to schedule the return service. The unit is plugged in, and the oven is operating as designed. ; ordrng 1 W11578959 (Magnetron)"