Near Austin, TX 78703
Luis
Job Details: 01/24/2019
REFRIGERATOR KITCHENAID KRFF707ESS01 "Arrived on site for ice build up. Removed deli drawer found small amount of ice on evaporator coil,unit cooling correctly no ice on cover. Called tech support(7723995788) per tech support changing defrost setting to basic. File #7723995788"
Near , TX 78653
Wesley
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL WMH32519HB2 Arrived on site for noise and bent frame. Advised customer on noise. Appears normal. Uninstalled microwave for 8th in bend on right side. Found bent rear panel and frame. Documented with pictures. Customer requesting replacement.
Near Leander, TX 78641
James
Job Details: 01/24/2019
DISHWASHER KITCHENAID KDTE104ESS4 Arrived on site and tested operation. I found the upper rack uneven and would roll out once pulled away from rear manifold. I found that the adjusters were not aligned properly on the dish rack. Corrected alignment and tested. Unit tests good and all functions working properly. Job complete
Near Georgetown, TX 78633
Jonathan S
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRX986SIHV00 "Arrived on site for refrigerator leaking water in bottom of RC. Customer stated that water from refrigerator had damage floor(see SD-QuickPic). Customer complained about silicone coming off at top of FC. Performed diagnostics and gained access to evaporator drain. Removed air chamber and found water com from backside air chamber. Removed ice box and found no in correct position. Waded sealer gum on back side adapter. Found ice underneath drain pan and caused to bow. Removed ice from drain pan and removed drain pan. Installed new drain pan and tested drain. Assembled evaporator panel and air chamber. Removed silicone on top of FC and added silicone between cabinet and cavity. Tested all other operations. All tested good, no water leaks present."
Near Austin, TX 78724
Luis
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRT348FMEB00 "Arrived on site for refrigerant leak in system. Removed evaporator,installed new evaporator and a uv drier. Vacuumed system down unit kept vacuum recharged system to manufacture spec powered unit on. Checked low side pressure good checked frost pattern good unit cooling down correctly"
Near Austin, TX 78724
Luis
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRT348FMEB00 "Arrived on site for no cool in fresh food. Found no,air flow from fan motor diagnosed faulty evaporator fan motor. Removed faulty motor installed new fan motor powered unit on good air flow from fan unit working as designed. ; used 1 WP2315539 (MOTOR EVAP) from stock"
Near Austin, TX 78723
Luis
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL ED2KVEXVL01 "Arrived on site for no water. Diagnosed frozen water lines,defrosted water lines ran water dispenser,water dispensing from dispenser unit working as designed."
Near Briggs, TX 78608
Al
Job Details: 01/24/2019
WASHER MAYTAG MHW5100DW0 Arrived to inspect washer not draining properly. Service tested the unit and got code F9E1- Long Drain.Removed and replaced the drain pump. Reassembled unit and unit tested as designed.All water lines were dry at the time of service.Customer OOW and charged:
Near New Braunfels, TX 78130
Diego G.
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL WMH73521CS5 Arrived on site. When attempting to replace door assembly found new door assembly damaged in box. We need to re-order door assembly to repair unit. Office to reschedule; ordrng 1 W10913378 (DOOR ASSY )
Near New Braunfels, TX 78130
Diego G.
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL WMH73521CS5 Arrived on site. When attempting to replace door assembly found new door assembly damaged in box. We need to re-order door assembly to repair unit. Office to reschedule; ordrng 1 W10913378 (DOOR ASSY )
Near New Braunfels, TX 78130
Diego G.
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL WMH73521CS5 Arrived on site. When attempting to replace door assembly found new door assembly damaged in box. We need to re-order door assembly to repair unit. Office to reschedule; ordrng 1 W10913378 (DOOR ASSY )
Near Georgetown, TX 78633
Jonathan S
Job Details: 01/24/2019
VENTHOOD WHIRLPOOL KXU2836YSS0 Arrived on site for venthood not powering on. Performed diagnostics and gained access to motor disconnected quick connector at motor and powered unit on. Tested voltage at quick connector and within range. Connected motor and tested. Unit was working. Called tech support and spoke with Chris (SR#7724001299). He stated that no intermittent issue have been documented with unit. Spoke with customer on user care guide. Possible user error. Customer stated that he would press fan button to turn on and fan button is for off only. Fan turns on by pressing fan speed. Called service manger and will honor service fee for 90 days
Near Pflugerville, TX 78660
Tyler B.
Job Details: 01/24/2019
WASHER WHIRLPOOL WTW7300DW0 "Arrived back on site for GEARCASE clutch and rotor install. Replaced clutch GEARCASE and rotor and tested good, no Leaks on ste"
Near Austin, TX 78745
Kevin
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRS315SDHM01 Arrived on site and inspected refrigerator and found dispenser reservoir is frozen. Spoke with tech line and there is currently not a recommended repair for stopping this. They spoke with the engineering team who said they are aware of the possibility but there is no recommended fix at this time. They advised that the temperature be turned down in the meantime SR7724001631
Near Austin, TX 78733
Luis
Job Details: 01/24/2019
REFRIGERATOR MAYTAG MFF2558VEM0 Arrived on site for no cool. At time of visit unit working per customer unit was making clicking noise and stopped cooling unit started cooling after about 3 days of no cool. Power cycled unit compressor not powering on starter clicking diagnosed faulty starter installed new starter powered unit on compressor powered on.
Near Leander, TX 78641
James
Job Details: 01/24/2019
REFRIGERATOR KITCHENAID KSC23C8EYY03 Arrived on site and found fresh food evaporator completely frozen over. I ran diagnostics to test fans and found to be good. I found the unit has a failed evaporator thermistor causing ice build up.. Collected diagnosis which applies to quoted labor. Customer will turn unit off to thaw ice from evaporator for service
Near Austin, TX 78759
Paul
Job Details: 01/24/2019
WASHER WHIRLPOOL WTW7300DW0 "Arrived onsite for the washer that will not fill with water and makes a grinding noise during spin. I found the washer way out of level and the feet screwed all the way in. I leveled the basket and tub in the chassis. I checked stored error codes and found an F7E5, F3E2, & F7E9. I ran service test 51 and found the unit not filling. I removed and reconnected the valve harness and tested the unit again. I found the unit filling correctly but not agitating or spinning correctly and stopping on cycle 18 during test 51. I found the band on the slider loose and slipping. I adjusted it enough to get it to tighten up and retested the unit. The unit would agitate and spin but during spin the unit would make a rubbing noise during every rotation for a 1/4 turn. I removed the wash plate and the basket and found all clean and clear. I removed the rotor and spun the unit by hand and still had the issue. I believe the noise is coming from the slider but explained to the
Near Killeen, TX 76549
Al
Job Details: 01/24/2019
WASHER MAYTAG MVWB835DW1 Arrived to install previously ordered parts. Removed and replaced the console and unit now has power. All water lines were dry at the time of service.JOB COMPLETE.
Near Buda, TX 78610
Leonardo
Job Details: 01/24/2019
RANGE JENN-AIR JES9800AAB Arrived on site to test unit for not getting to temp test sensor and found opened sensor. Replaced sensor test unit and found bake element not coming on unit getting hot due to broiler coming on during the preheat cycle. Will need new control board part is no longer available checked for part number and there is 13 part numbers for it all no longer available don’t know which part number to use. Office to reschedule ; saved tckt
Near Austin, TX 78748
Brandon
Job Details: 01/24/2019
DRYER WHIRLPOOL WTW4855HW1 "Arrived on site for customer complaint of unit shaking during use, found unit needed to be leveled, unit tested good after leveled."
Near Austin, TX 78748
Brandon
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRB322DMBM00 "Arrived on site for customer complaint of no ice production, found water supply line was turned off, once turned on, unit tested good."
Near Hutto, TX 78634
Jerry C.
Job Details: 01/24/2019
COOKTOP WHIRLPOOL WCG55US0HS00 "WCG55US0HS00 Arrived to inspect flame issue. I inspected the flame and elected to replace the burner caps. After cap replacement, the unit worked as designed with an acceptable flame pattern. No gas leaks detected during service."
Near Georgetown, TX 78628
Jonathan S
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL ED5FVGXWS00 "Arrived on site for refrigerator not dispensing water. Per diagnostics and tested dispenser and found valve activating. Removed filter and tested and found water dispensing. Installed filter and continue to engage filter. Found water would dispense. Found bad filter head housing. Pulled unit of and turn water off. Removed bad filter housing and installed new. Turned water on to unit and inspected for leaks. Tested water dispenser while monitoring filter housing for leaks. Leveled unit. Installed filter and flush system. Cycled ice maker and found fill tube frozen. Thawed fill tube and cycled ice maker again, tested good. All checks good, no water leaks present. Paid in full on credit card."
Near Cedar Park, TX 78613
Lou
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL WMH31017FS0 "arrived on site to inspect microwave venthood light. Upon further inspection, I turned the light on full, half then off. I unplugged the unit and plugged it back in and the light automatically came on. I verified the correct light bulb then I removed and replaced the main control and tested. When I plugged the unit back in the light did not come on. I tested the light by turning it on full, half and then off and it operated as designed. Job completed."
Near Harker Heights, TX 76548
Al
Job Details: 01/24/2019
DRYER MAYTAG MEDX655DW1 Arrived to inspect unit not shutting off after drying. I confirmed the complaint and removed the upper panel to the timer and saw it was not seated into the connection. I corrected the issue and tested the unit. Unit tested as designed.JOB COMPLETE
Near Cedar Park, TX 78613
Paul
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRS555SIHZ00 Arrived onsite for the refrigerator making a squeaking noise when the right door is opened and closed. I didn’t get a return call from my pre-call. Nobody answered the door. Called the office and spoke with Jen. While holding ms opened the door. I found the toe kick not installed correctly causing the noise. I corrected the toe kick and now the unit is quiet when opening and closing both doors. Call complete.
Near Kingsland, TX 78639
Thomas L.
Job Details: 01/24/2019
RANGE KITCHENAID KDRS407VMW01 Arrived on site for unit having issues with right front foot. Found right front adjustment shaft damaged. Replaced with new shaft. Foot now operate properly. This was an on occupied and open home.
Near Marble Falls, TX 78657
Thomas L.
Job Details: 01/24/2019
DISHWASHER KITCHENAID KDTE204EPA4 Arrived on site for unit not drying properly. Tested water temperature to find it at 115°. Ran unit through diagnostics and found a failed optical water indicator. Replaced and tested for leaks. All water connections are dry.
Near Georgetown, TX 78628
James
Job Details: 01/24/2019
REFRIGERATOR KITCHENAID KRFF707ESS01 Arrived on site and tested operation. I found the noise coming from the rail shaft. The retainer clip is missing from the right side and the shaft is falling out. Unit will need new clip to repair; ordrng 1 W10852685 (clip)
Near Cedar Park, TX 78613
Lou
Job Details: 01/24/2019
MICROWAVE KITCHENAID KMHS120ESS1 "arrived on site to inspect microwave with no power. Upon further inspection, the customer advised that when he closed the door to the unit all power shut off. He attempted to troubleshoot it with no luck. I unplugged the unit and removed the control panel to inspect the bottom switch. Using my multimeter, I tested ohms to the switches and all were good. I pulled the fuse and found it to be open.I removed and replaced the fuse ad tested the unit. It operated as designed, job completed."
Near Austin, TX 78745
Leonardo
Job Details: 01/24/2019
DISHWASHER WHIRLPOOL WDF310PLAB4 Arrived on site to test unit for unit not filling with water. Test unit and found wires chewed to float and fill valve. Will need new wire harness WPW10370883
Near Kempner, TX 76539
Al
Job Details: 01/24/2019
WASHER WHIRLPOOL WFW9150WW00 "Arrived to inspect unit not balanced. Took off front lower panel and checked to see if this unit is designed for 4 shocks and verified it is supposed to have 4, not 3. Unit was worked on 2 years ago by another service company. I photographed the inside of unit to illustrate there needs to be 4 shocks for this unit to balance as designed. Authorization sent to ERIKA. Unit needs an additional shock.; ordrng 1 CNOTE (AUTHORIZATION )"
Near San Marcos, TX 78666
Diego G.
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL ED5FHEXVQ01 Arrived on site. After further diagnosis found only needed relay. Removed relay from compressor and replaced. All functions tested OK. Instructed customer to allow 24 hours for unit to cool down completely. No leaks present. Job complete
Near San Marcos, TX 78666
Diego G.
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL ED5FHEXVQ01 Arrived on site. After further diagnosis found only needed relay. Removed relay from compressor and replaced. All functions tested OK. Instructed customer to allow 24 hours for unit to cool down completely. No leaks present. Job complete
Near San Marcos, TX 78666
Diego G.
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL ED5FHEXVQ01 Arrived on site. After further diagnosis found only needed relay. Removed relay from compressor and replaced. All functions tested OK. Instructed customer to allow 24 hours for unit to cool down completely. No leaks present. Job complete
Near Austin, TX 78728
Paul
Job Details: 01/24/2019
OVEN WHIRLPOOL WFE745H0FS0 Arrived onsite for the range with the RR and LR burners not working again. I found the LR burner working as designed. The knob is defective and not grabbing the shaft correctly. I showed the customer this on the previous visit and he did not want me to order the knob because of the price. I tested the RR burner and had 247VAC out of the infinite switch I replaced on the previous visit and the heater is no longer working. Mr wants to go ahead and replace the knob.
Near Austin, TX 78703
Scott
Job Details: 01/24/2019
WASHER WHIRLPOOL WFC7500VW2 "Arrived on site for clothes not spinning out properly . Ran diagnostics no error codes as well as a calibration cycle . Put unit in spin cycle as well as clean cycle , no errors . All is checking out normal . If customer is still experiencing issues recommend replacing MCU control. No water leaks detected at time of service . Job complete ."
Near Leander, TX 78641
James
Job Details: 01/24/2019
RANGE WHIRLPOOL WFG515S0ES Arrived on site and tested operation. I found the flames on the 2 rear burners to be adjusted too low. Corrected flame height and tested. Unit working properly. Job complete
Near Granite Shoals, TX 78654
Thomas L.
Job Details: 01/24/2019
DRYER WHIRLPOOL WED75HEFW1 Arrived on site for noisy operation. Found front panel rattling. Used pads to stop the noise. Dryer and house venting are both new and very clean.
Near Georgetown, TX 78633
Jonathan S
Job Details: 01/24/2019
WASHER GE GTW680BSJ1WS "Arrived on site for washer not operating. Performed diagnostics mode and and found fault code 3. Ran spin test 14 and found unit not spinning. Tested not at control, found faulty motor. Removed motor and installed new. Ran spin test and found unit would start to spin but would not complete test. Tested hall sensor at control and found failed hall sensor. Removed hall sensor and installed new. Ran spin test and it completed.. Ran in normal wash mode and monitored water connection and operation. All tested good, no water leaks present. Paid in full on credit card."
Near Harker Heights, TX 76548
Al
Job Details: 01/24/2019
DISHWASHER WHIRLPOOL WDT780SAEM0 Arrived to inspect dishwasher leaking. Confirmed the complaint and removed and replaced the pump and motor. Reassembled the unit and the unit tested as designed. All water lines were dry at the time of service.JOB COMPLETE
Near Georgetown, TX 78626
Jonathan S
Job Details: 01/24/2019
RANGE KITCHENAID KSDG950ESS1 (AI) Arrived on site for range cooktop continually sparking when igniting. Performed diagnostics and tested cooktop. Found customer was leaving burner control in ignite position. Spoke with customer on user care guide. Tested all operations and all tested good.
Near Austin, TX 78738
Brandon
Job Details: 01/24/2019
REFRIGERATOR KITCHENAID KSSO42QTX02 "Arrived on site for customer complaint of ice not dispensing and screw fell out, found broken ice door and motor bracket. Ordering parts. ; ordrng 1 2180353 (door ice) and 1 CNOTE (OFFICE TO RESCHEDULE ) and 1 CNOTE (AUTH ) and 1 WP2305242 (connector) and 1 WPW10546285 (motor)"
Near Austin, TX 78739
Leonardo
Job Details: 01/24/2019
RANGE WHIRLPOOL WEG750H0HZ0 Arrived on site to for unit being off 75 degrees. Test unit and found average temp to be good. Advised customer to do a oven calibration based on how unit is cooking. Job complete
Near Austin, TX 78748
Kevin
Job Details: 01/24/2019
DRYER WHIRLPOOL WED9200SQ1 "Arrived on site and inspected dryer and found it is not heating, disassembled the dryer and found heating element has failed. Replaced heating element and cleared lint from dryer. Explain to customer that heating element fail likely due to an airflow issue and that dryer should not be used until then to exterior of home has been cleaned out. Also recommended that a cleaning service we used and that it not be done DIY. Explained to customer that if dryer vent to exterior is not cleaned and the heating element fails again A service fee will be charged"
Near Austin, TX 78741
Scott
Job Details: 01/24/2019
DRYER MAYTAG MEDX655DW1 "Arrived on site no heating dryer. Unit will tumble but not heat up ,checked outlet and found one of the legs is falling off , only getting one leg of power. Checked breakers and both were in on position . Flipped off the back on , still only one leg . will need an electrician to take a look at outlet and breaker . Checke element and thermostats ,fuse all checked normal . No lint build up at time . Job complete"
Near Round Rock, TX 78665
Jerry C.
Job Details: 01/24/2019
WASHER WHIRLPOOL MVWB765FW2 "MVWB765FW2 Arrived to inspect basket position. The customer had the chassis leveled, but the basket was leaning to the right. I centered the basket via leveling legs and tested. The unit had F7E9, F3E2, F7E6 and F0E5 stored in memory. I cleared the codes and calibrated. I then tested within automatic service mode. The gear case made a loud rubbing noise at the same point during rotation. I removed the rotor and found signs of oil loss. I removed and replaced the gear case and then calibrated and tested. The unit operated as designed and no errors were generated. No leaks observed during service, drain safety strap added."
Near Georgetown, TX 78633
Thomas L.
Job Details: 01/24/2019
DISHWASHER WHIRLPOOL WDT710PAYM6 Removed and replaced failed wash motor assembly. Unit now operates properly with no water leaks.
Near Austin, TX 78753
Luis
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRF535SWHZ00 "Arrived on site for noise complaint. Power cycled unit on,y odd noise coming from damper,compressor and fans powered on and working correctly,ran icemaker through a cycle no odd noise from icemaker or valve. Diagnosed loud damper control. Installed new damper control"
Near Killeen, TX 76542
Arthur B.
Job Details: 01/24/2019
DISHWASHER GE GDF510PSD0SS "Arrived onsite to install new wash pump kit to dishwasher from my prior diagnosis. Removed and replaced wash pu p with updated kit. Reassembled. Tested unit. Unit now fills,washes,drain and heats as intended. All water connections were dry at time of service."
Near Canyon Lake, TX 78133
Robert
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRF736DAB "Arrived on job for complaints of noise. Pulled out evaporator cover found ice around fan rubbing together causing noise. Reassembled, no leaks detected at time of service"
Near Austin, TX 78717
Paul
Job Details: 01/24/2019
WASHER WHIRLPOOL WTW4815EW1 "Arrived onsite for the washer filling with too much water. Ms stated the tub filled all the way to the top with only a sweater in the unit. I ran auto diagnostics and the unit only filled to the top of the wash plate and completed the cycle and worked as designed. I ran the delicate cycle with the soil level set on extra light and the unit filled to about 2 inches below the top of the basket. I ran a calibration on the control and repeated the delicate cycle. The unit filled over half full and was still filling when I turned it off. I replaced the control, ran the calibration cycle, and tested the unit again in the delicate cycle. The unit is working as designed. There were no water leaks present at the time of service. Call complete."
Near Austin, TX 78759
Paul
Job Details: 01/24/2019
WASHER WHIRLPOOL WTW5000DW1 Arrived onsite for the washer that is completely dead and has power to it. I found 124VAC into the control and the control non-responsive. Need to replace the control to complete service. Parts stated the control is already ordered. RS for Mon 1/28.; ordrng 1 C-NOTES (DANIEL STATED THE CONTROL IS IN GT. IF THERE IS ANY WAY TO ADD MS ON FOR FRIDAY LAST CALL SHE WOULD BE VERY APPRECIATIVE. )
Near Austin, TX 78728
Wesley
Job Details: 01/24/2019
WASHER WHIRLPOOL WTW4816FW2 Arrived on site and found latch failed preventing spin. Advised customer on findings and ordering latch to repair. ; ordrng 1 W10682535 (LATCH)
Near Leander, TX 78641
James
Job Details: 01/24/2019
ICE MACHINE KITCHENAID KUIS15NRTS2 "Arrived on site and tested and found water leaking from internal drain pump tube. I found the tube to be upside down. I also found that the connections for the drain pump and recirculating pump are severely corroded and not making proper contact. Unit will need new pump harness, recirculating pump and internal drain pump to repair ; ordrng 1 2313702 (water pump) and 1 WP2310092 (harns-pump) and 1 WP2313705 (pump)"
Near Liberty Hill, TX 78642
James
Job Details: 01/24/2019
RANGE WHIRLPOOL KDRS483VSS04 Arrived on site and installed new controls and terminal block. Tested operation and found all functions test good. Jo complete. Customer paid in full at time of diagnosis
Near Cedar Park, TX 78613
Lou
Job Details: 01/24/2019
OVEN WHIRLPOOL GBD307PDB7 arrived on site to install previously diagnosed and ordered parts. I removed and replaced the UI console and installed the rebuilt main control. Tested the unit and it operated as designed. All fees collected at previous service call. Job completed.
Near Austin, TX 78746
Scott
Job Details: 01/24/2019
OVEN JENN-AIR JJW2830WB00 "Arrive on site replaced control. Preheated both ovens at same time . All checked good . Job complete ."
Near Austin, TX 78749
Kevin
Job Details: 01/24/2019
WASHER MAYTAG MVWC416FW1 Arrived on site and inspected washer and did not find any saved error codes. Customer complaint is the machine agitates before it fills with water. Explained how the sensing cycle operates in order to measure the amount of clothes and to determine the correct amount of water that is needed. The customer is unhappy that the machine does not fill up with water and also explained how the new machines operate differently to conserve water. Reported issue to tech line. No water leaks from connections at time of service. SR7724000920
Near Austin, TX 78745
Kevin
Job Details: 01/24/2019
DRYER WHIRLPOOL NED4655EW1 "Arrived on site and inspected dryer and found no power on either leg at the terminal block. The home is new to the customer and none of the breakers are labeled and none of them appear to be tripped. Customer has already tried them all. An electrician will be needed to correct power to dryer before any further diagnosis can be done. if restoring power does not corrects issue customer will contact office, Job complete"
Near Austin, TX 78744
Luis
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRS325SDHB00 Arrived on site for cooling issue. Found freezer not defrosting again. Called tech support and gave history of parts replaced per tech support need to replace ui file #7723999827; ordrng 1 W11214887 (UI CONTROL)
Near Canyon Lake, TX 78133
Robert
Job Details: 01/24/2019
REFRIGERATOR KITCHENAID KRMF706ESS01 "Arrived on job to replace evaporator motor. Replaced, tested functionality passed. No leaks detected at time of service"
Near Killeen, TX 76542
Arthur B.
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRX988SIBM01 Arrived onsite for customer complaint of ice making ice on RC section. Found icemaker error code E2 (Lost Home Position). Was able to free what ice was formed in mold. Ran test 45 to fill. Advised customer to observe unit and see if ice is produced in 24hrs. No other issues found. All water connections were dry at time of service.
Near Austin, TX 78739
Leonardo
Job Details: 01/24/2019
COOKTOP JENN-AIR JGD8430ADB Arrived on site to test unit for right front burner not igniting and all burner continue to ignite. Found screws for right front burner were rusted. Will need new burner head new screws and new orifice holder. Will also need all 4 switch sparks and new ignitor module. Customer said she will just continue using it the way it is. Job complete
Near Horseshoe Bay, TX 78657
Thomas L.
Job Details: 01/24/2019
ICE MACHINE KITCHENAID KUIS18PNXB0 Arrived on site for Noisey operation. Found unit full of ice and cycled off. Moved ice and cycled unit on. I observed a complete cooling and I observed no problems. unit is clean and has no water leaks. Callie ran card for service fee.
Near Austin, TX 78757
Wesley
Job Details: 01/24/2019
DISHWASHER WHIRLPOOL WDT780SAEM1 Arrived on site and corrected f7e1 error by resetting. All checks good. Unit is now operating as designed.
Near Austin, TX 78701
Scott
Job Details: 01/24/2019
DISHWASHER KITCHENAID KDTE254ESS1 "Arrived on site for unit not starting . Ran diagnostics got float and long drain error codes . Getting voltage to drain motor but motor is not working . Ordering drain motor , also control ( more then likely not needed but would like to have just Incase . No water leaks detected at time of service . Return 1/25. ; ordrng 1 W10866124 (cntrl-elec) and 1 WPW10531320 (DRAIN PUMP)"
Near Austin, TX 78753
Wesley
Job Details: 01/24/2019
DRYER WHIRLPOOL WED75HEFW1 Arrived on site and found incorrect voltage at wall. Advised customer that voltage will need to be corrected in order for proper dryer function.
Near Belton, TX 76513
Arthur B.
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRV986FDEM01 Arrived onsite for customer complaint of ice maker not producing ice on 5 Door Refrigerator. Ran diagnostics and found error code E2 (Lost Home Position) on test 056. Removed and replaced icemaker. Reassembled. Ran tested 057. Icemaker went into harvest as intended. No other issues found. All water connections were dry at time of service.
Near New Braunfels, TX 78132
Robert
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRF954CIHM00 Arrived on job to install regulator valve. Because the pressure supply is too high. Tested functionality passed no leaks detected at time of service.
Near Taylor, TX 76574
Jerry C.
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRS325FDAM02 WRS325FDAM02 Arrived to inspect no ice or water. I found the filter head had failed and I removed and replaced it. I installed the replacement filter the customer provided and it operated both the dispenser and the ice maker. No leaks observed during service.
Near Georgetown, TX 78633
Jonathan S
Job Details: 01/24/2019
DISHWASHER KITCHENAID KUDI02FRSS2 "Arrived on site for dishwasher making loud noise. Performed diagnostics mode, no error codes. Found noise coming from wash motor, due to failed bearing. Will need to replace sump assembly to complete repair. Gained access to sump assembly, removed failed sump assembly and installed new. Tested unit and monitored water connection. All tested good, no water leaks present.
Near Kyle, TX 78640
Kevin
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRS571CIHZ0 "Arrived on site customer is experiencing warmer temperatures and refrigerator, set refrigerator into diagnostic cycle and found thermistors are checked good airflow from evaporator fan is good, diffuser is opening and closing and return air appears OK. Removed diffuser and found some frost blockage, cleared frost and replaced diffuser. Recommended to customer that it be monitored for correct operation, no water leaks from connections at time of service"
Near Canyon Lake, TX 78133
Robert
Job Details: 01/24/2019
WASHER MAYTAG MVWX65TDW1 "Arrived on job for complaints of power not working/water stuck in tub. Replaced control board,tested with diagnostics passed. No leaks detected at time of service."
Near Brushy Creek, TX 78717
Paul
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL KRSC503ESS01 Arrived onsite for the refrigerator with product in the FC defrosting and a no ice condition. I found the FC coil completely frosted up. I ran a forced defrost and found the bimetal closed and 123VAC to the heater but no amp draw. I defrosted the coil and upon further inspection I found one of the molex connectors was not snapped together properly on the L1 side. I tested the heater and it ohms out good. The unit is working as designed. There were no water leaks present at the time of service. Call complete.
Near New Braunfels, TX 78130
Robert
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRX735SDHZ01 Arrived on job for complaints of icemaker not working. Found wire harness shorted. ; ordrng 1 W10884720 (harns-wire)
Near Austin, TX 78745
Leonardo
Job Details: 01/24/2019
OVEN KITCHENAID KGRS505XSS01 Arrived on site to test unit for upper oven not working. Test unit and found ad glow ignitor and bad bake burner. Will need to order new bake burner WPW10407912 and new ignitor WP7432P143-60. Will also need screws WP4159193 x2 7101P287-60 x 2 rescheduled for Tuesday 1/29 customer prefers morning appointment ; ordrng 1 WP7432P143-60 (BAKE IGNITOR ) and 2 7101P287-60 (SCREWS)s and 2 WP4159193 (SCREWS )s and 1 WPW10407912 (BAKE BURNER )
Near Manchaca, TX 78652
Leonardo
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL WMH31017HS2 "Arrived on site to test unit for right side of unit hanging. Test unit and found screw and nut coming off. Found stripped screw, removed screw and installed new screw and new nut job complete unit installed correctly"
Near Liberty Hill, TX 78642
James
Job Details: 01/24/2019
OVEN WHIRLPOOL WOD51EC0HS00 Arrived on site and tested operation. I found fault code for stuck key and lower blower error. I found the blower wheel out of place and jammed. Unit will need new blower and ui to repair. ; ordrng 1 W11109174 (blower)
Near Austin, TX 78703
Scott
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL JMV9196CS3 "Arrived on site , replaced door . Will need to order another door because it’s dented on bottom left corner . Left damaged door on MW so customer will have a working unit . ; ordrng 1 W11205116 (MW DOOR )"
Near Austin, TX 78750
Paul
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL WML55011HS0 Arrived onsite for the microwave that has a gush of air on the left side between the door and frame. I found the dampener working correctly. I found a large gap between the dampener and the duct causing air to blow out under the cabinet because the unit was not taped up correctly. I put on a piece of 3M taped to close the air gap but I explained to the customer that the cabinet needed to be cut out larger so the duct could be taped all the way around it and sealed properly. The customer is going to get the contractor to fix the issue. I tested the unit and the amount of air coming out of the front was much less. Call complete.
Near Pflugerville, TX 78660
Wesley
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL WMH31017AS Arrived on site and found unit mag failed. Replaced magnetron . All checks good unit is now operating as designed.
Near Georgetown, TX 78633
Jonathan S
Job Details: 01/24/2019
MICROWAVE WHIRLPOOL WMH32519CS1 "Arrived on site for microwave not heating. Performed diagnostics and tested unit while monitoring amp draw, found drawing 10.5 amps when heating. Gained access to diode and found it had grounded out. Found magnetron had grease buildup. Will need to replace replace high voltage side.
Near Austin, TX 78739
Brandon
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRF555SDFZ05 "Arrived on site for customer complaint of noise coming from compressor. Found compressor needed adjusted at condenser due to vibration noise, unit tested good."
Near Killeen, TX 76542
Arthur B.
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRV986FDEM01 Arrived onsite for customer complaint of 5 door refrigerator door indicator not closing. Removed pantry door and found deli control harness broken. Was able to repair wiring using soldering methods. Was able to solve door indicator. Found door UI LED shorted causing water or ice not to dispense. Unit will need UI and pantry UI to complete repair. OF to R/S once authorization is given. All water connections were dry at time of service.; ordrng 1 CNOTE (NEED AUTHO)
Near Dripping Springs, TX 78620
Brandon
Job Details: 01/24/2019
COOKTOP KITCHENAID KCED600GSS00 "Arrived on site for customer complaint of cooktop being cracked, I replaced cooktop and added foam tape, tested good,"
Near New Braunfels, TX 78130
Robert
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRF767SDHZ00 Arrived on job for complaints of temperature too warm in freezer and refrigerator. Found refrigerator not defrost properly. Ordered heater install only if needed. ; ordrng 1 W10865431 (motor-evap) and 1 WP12729128 (heater)
Near Kyle, TX 78640
Kevin
Job Details: 01/24/2019
DRYER WHIRLPOOL WED4950HW0 "Arrived on site and inspected dryer and found it is tumbling properly but there is no heat. Inspected power at terminal block and found from L1 to neutral reads 120 V, L2 to neutral reads 120 V, but L1 to L2 reads 0 V. apartment complex will need to correct power to the dryer in order for it to work properly. Dryer is new and there is no lint buildup at time of service. Also recommended that apartment complex ensure good airflow by cleaning the vent to the exterior of the building, job complete."
Near Killeen, TX 76542
Arthur B.
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRS325FDAB05 "Arrived onsite to install new compressor to SxS refrigerator from prior tech’s diagnosis. Removed compressor,drier and installed new compressor,dye drier using braising methods. Vaccummed unit down to -25psi. Charged unit with 5.5oz of R134a refrigerant. Powered up unit. Found good frost pattern on evaporator. Reassembled. No other issues found. All water connections were dry at time of service."
Near Austin, TX 78734
Brandon
Job Details: 01/24/2019
REFRIGERATOR KITCHENAID KRFF302ESS "Arrived on site for customer complaint of unit being dead. Found faulty control board, unit did not have model tag, could not determine the programming code. Collected service fee on check."
Near Austin, TX 78747
Leonardo
Job Details: 01/24/2019
RANGE WHIRLPOOL WFC310S0EB1 Arrived on site to replace harness and rcptcl. Replaced all parts test unit and unit test good job complete all burner working correctly at this time.
Near Canyon Lake, TX 78133
Robert
Job Details: 01/24/2019
DRYER WHIRLPOOL WED4815EW1 "Arrived on job for complaints of dryer not heating,found no air flow dryer vent pulled out to far. Adjusted vent, air flow returned. Ran test cycle passed."
Near Wimberley, TX 78676
Diego G.
Job Details: 01/24/2019
DISHWASHER WHIRLPOOL WDT720PADM3 Arrived on site. Check for no operation issues. Found motor locked up. We need sump and motor and control for back up. Reschedule for 1/30/19; ordrng 1 W11309335 (SUMP AND MOTOR )
Near Wimberley, TX 78676
Diego G.
Job Details: 01/24/2019
DISHWASHER WHIRLPOOL WDT720PADM3 Arrived on site. Check for no operation issues. Found motor locked up. We need sump and motor and control for back up. Reschedule for 1/30/19; ordrng 1 W11309335 (SUMP AND MOTOR )
Near Wimberley, TX 78676
Diego G.
Job Details: 01/24/2019
DISHWASHER WHIRLPOOL WDT720PADM3 Arrived on site. Check for no operation issues. Found motor locked up. We need sump and motor and control for back up. Reschedule for 1/30/19; ordrng 1 W11309335 (SUMP AND MOTOR )
Near Killeen, TX 76542
Al
Job Details: 01/24/2019
REFRIGERATOR WHIRLPOOL WRF736SDAM13 Arrived to install previously ordered parts. Removed and replaced the MAIN CONTROL WPW10589838. Unit tested as designed. All water lines were dry at the time of service.JOB COMPLETE
Near Georgetown, TX 78628
Jerry C.
Job Details: 01/24/2019
REFRIGERATOR KITCHENAID KFIS29PBMS00 "KFIS29PBMS00 Arrived to instal parts. I found the unit would cool to 1 degree in the fc set to -5 and I verified all functions of the ice maker system, including fans fully operational. The ice maker housing was at 24 degrees and declined reasonably within the ice maker fan test. I inspected the fc evaporator area and found a large mass of ice at the cap tube entry area, denoting a leak within the evaporator. Office to order evaporator. Please allow three hours for sealed system service upon return. ; ordrng 1 CNOTES (3 HOURS SEALED SYSTEM SERVICE) and 1 WPW10608485 (evaporator)"
Near New Braunfels, TX 78132
Diego G.
Job Details: 01/24/2019
COMPACTOR KITCHENAID KTTS505ESS Arrived on site. Replaced dented panel. All functions tested OK. No leaks present. Job complete
Near New Braunfels, TX 78132
Diego G.
Job Details: 01/24/2019
COMPACTOR KITCHENAID KTTS505ESS Arrived on site. Replaced dented panel. All functions tested OK. No leaks present. Job complete
Near New Braunfels, TX 78132
Diego G.
Job Details: 01/24/2019
COMPACTOR KITCHENAID KTTS505ESS Arrived on site. Replaced dented panel. All functions tested OK. No leaks present. Job complete