Near Leander, TX 78641
David Z
Job Details:
07/20/2020
WASHER WHIRLPOOL WTW4950XW3
"Arrived on site to diagnose washer that was not finishing cycles. Performed diagnostic and error code checks. Found error code for lid lock and for slow fill / no fill. Tested lock and found lock working perfectly. Found cold valve was barely flowing any water and needed to be replaced. With no cold water unit could not rinse. Replaced valve and retested. Unit is now filling and working as designed.Call complete, no water leaks found."
Near Georgetown, TX 78628
Lou
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRT549SZDB00
"Arrived on site to inspect refrigerator tripping the breaker. Upon further inspection, I found plugged in, but no power going to it. I checked the breaker and found it tripped along with two other kitchen GFCI breakers. When I turned all three breakers on, one the kitchen breakers tripped and then the refrigerator breaker tripped. I was able to get the refrigerator breaker to hold long enough to test amp draw at the compressor. My amp reading was .73amps. I unplugged the unit and when I plugged it back in, the refrigerator breaker and both kitchen breakers tripped again. I recommended that the builder have someone check the breakers and also advised that Whirlpool does not approve of the GFCI breakers or outlets for the refrigerator or dishwasher. I was able to get the breaker to hold again and at the end of service, the refrigerator was still powered up and operating as designed. No water leaks observed during service, job completed."
Near Georgetown, TX 78628
Lou
Job Details:
07/20/2020
RANGE WHIRLPOOL WFC315S0JB0
"Arrived on site to inspect range panel damage. Upon further inspection, I found the range control panel dented on the right & left corners. I removed and replaced the panel and tested the unit and it is operating as designed. Job completed."
Near Briarcliff, TX 78669
Richard
Job Details:
07/20/2020
ICE MACHINE WHIRLPOOL WUI75X15HZ00
Arrived onsite for the ice machine not making ice. During testing found that the ice machine is not getting water. Upon inspection found that the water line going to the ice machine was crimped causing the issue. Un crimped the hose and ice machine is now getting water and tested good. Complete
Near Kyle, TX 78640
Robert
Job Details:
07/20/2020
RANGE AMANA ACR4303MFB4
"Arrived onsite to test LR burner not working. Tested unit, burner was open and switch was not sending 240v. Replaced burner and switch, tested unit and unit functions correctly. Job complete."
Near Round Rock, TX 78665
Jonathan S
Job Details:
07/20/2020
DRYER WHIRLPOOL MGD3500FW
Arrive onsite for dryer making a smell. Performed diagnostics code and found no error. Tested operation on high heat. Inspected inside of drum and found burnt rubber stuck to the back panel. Disassembled unit and inspected rollers and pulleys. Scraped remaining burnt rubber off interior of drum. Burnt rubber most likely came from laundry. Reassembled dryer and tested operation.
Near Andice, TX 78628
Jonathan S
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRS315SDHM05
Arrived on site for refrigerator slowing dispensing water. Inspected unit and work area. Tested dispenser operation. Removed water filter and tested and found restriction within water filter. Informed customer to replace only with Every drop brand. All other operations tested good. No water leaks detected.
Near Austin, TX 78724
Eman J.
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL FFHT1425VV
"Arrived onsite for refrigerator not cooling. Tested system. Not receiving power. Ordering power cord 5304520505, capacitor 5304520510 and pcb board 5304520505. Office please reschedule ; ordrng 1 5304520503 (PCB BOARD) and 1 5304520505 (POWER CORD ) and 1 5304520510 (CAPACITOR) and 1 AUTHO (AUTHO)"
Near Temple, TX 76502
Jonathan M
Job Details:
07/20/2020
ICE MACHINE KITCHENAID KUIX505ESS
"Arrived on site for ice machine that is not making very much ice. Inspected unit and work area. Customer advised that the unit was making extremely thin ice and ice was melting before it would build up. Ran unit through diagnostics and found the water valve barely pulling in water and timing out before filling the reservoir. Replaced valve and tested unit in diagnostics again. Unit filled properly but did not feel completely. The water level sensor would only let the unit fill up a fifth of the way into the water reservoir. When recirculating the water, there was not enough water to continue to recirculate at all times. Replaced recirculating pump (with water level sensor) and tested unit. Unit is working as designed. Call complete."
Near New Braunfels, TX 78130
Robert
Job Details:
07/20/2020
REFRIGERATOR GE GTS22WCPCRBB
"Arrived onsite to test unit for freezing in the refrigerator bottom. Ordering temperature control for refrigerator compartment. Will need to have sensor, motor and control def replaced as well. Need to bring on next visit. Need authorization. Office to reschedule ; ordrng 1 WR09X10104 (control temperature)"
Near Austin, TX 78717
Wesley
Job Details:
07/20/2020
DISHWASHER WHIRLPOOL WDT970SAHZ0
Arrived onsite for door not closing and corrected door alignment and unit is now operating as designed. Advised customer on use and care.
Near Austin, TX 78754
Eman J.
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRX735SDHZ00
Arrived onsite for previous diagnosed parts. Install ice maker. Tested system. Everything works as designed. Job complete.
Near Austin, TX 78704
Jacob
Job Details:
07/20/2020
RANGE WHIRLPOOL KSGG700ESS1
Arrived onsite for unit not burning evenly on front right burner. Tested unit. Found that front right burner is not but burning as even. Ordered part. Rescheduled with customer ; ordrng 1 W10876582 (cap-burner) and 1 WPW10256028 (burnr-head)
Near Austin, TX 78748
Leonardo
Job Details:
07/20/2020
DISHWASHER AMANA ADB1400AGS1
Arrived on site to test unit for unit not washing. Found unit filling with water but wash motor not turning on. Replaced sump and motor test unit and unit test good job complete no leaks present at this time.
Near , TX 76550
Al
Job Details:
07/20/2020
ICE MACHINE KITCHENAID KUIX505ESS1
"Arrived to inspect ice machine not producing ice.Confirmed the complaint and found the ice sitting on the slab waiting to drop onto the grid cutter was not complete.Water was pumping in and draining from the unit.Called Whirlpool Tech line and spoke with CATHY SR#7728358261.Determined the issues are found are directly related to the sealed system failure.Ordering compressor, access valve and dye drier, authorization, sealed system tech and 2 hours.Office to reschedule with customer for return service appointment.Needs more work ; ordrng 1 CNOTE (AUTHORIZATION ) and 1 CNOTE (SEALED SYSTEM TECH ) and 1 CNOTE (2 HOURS ) and 1 CNOTE (RESEARCH FOR ACCESS VALVE ) and 1 WPW10200037 (DRIER TUBE) and 1 WPW10605286 (COMPRESSOR )"
Near Austin, TX 78703
Leonardo
Job Details:
07/20/2020
DISHWASHER KITCHENAID KUDE20IXSS8
Arrived on site to test unit for not starting. Tested unit found sump and motor hose leaking water causing machine not to function and display error codes.
Near Austin, TX 78748
Leonardo
Job Details:
07/20/2020
DISHWASHER WHIRLPOOL WDF330PAHS3
Arrived on site to test unit for unit not washing. Test unit and found unit not getting any water. Test unit and found float stuck in the full position. Secured float test unit an dunit test good job complete.
Near Austin, TX 78729
David S
Job Details:
07/20/2020
DRYER WHIRLPOOL WGD4815EW2
"Arrived on site for dryer having no heat. I inspected the unit and work area. I inspected the thermal cut off, thermal fuse, and thermostats, all checked good. I found the ignitor no glowing when calling for heat. I replaced the ignitor and the flame sensor. I tested the unit and the ignitor came on and ignite the flame. Unit is operating as designed. Job complete."
Near Luling, TX 78648
Noah D
Job Details:
07/20/2020
RANGE FRIGIDAIRE FFEF3003UW
"Arrived on site to inspect oven for burner issues, upon inspection found the burners had pressure switches that had been bent and made intermittent contact will need to order new burners, office to reschedule ; ordrng 2 5304516159 (BURNER )s and 2 5304516160 (SMALL BURNER )s"
Near Austin, TX 78703
Leonardo
Job Details:
07/20/2020
DISHWASHER WHIRLPOOL GU2455XTSB1
Arrived on site to test unit for unit not washing. Found bad fill valve. Replaced valve. Test unit and unit and washing correctly job complete.
Near Austin, TX 78759
Eman J.
Job Details:
07/20/2020
WASHER MAYTAG MVWC425BW0
Arrived onsite for washer not starting cycle. Tested system. Unit did not progress pass sensing cycle. Unplugged unit for 5min to reset it and enter diagnostics. Entered diagnostics. Everything worked as designed. Ran system in normal mode again. Did it progress pass sensing cycle. . Tested system. Everything works as designed. Job complete.
Near Austin, TX 78734
Brandon
Job Details:
07/20/2020
REFRIGERATOR JENN-AIR JBRFR30IGX00
"Arrived on site for customer complaint of unit making squeaking when closing door, and not sealing at top unless pushed closed. I found squeaking noise coming from bottom hinge, and unit not closing at top unless pushed shut. Ordering both hinges. ; ordrng 1 CNOTE (2 TECHS) and 1 CNOTE (OFFICE TO RESCHEDULE ) and 1 W11036493 (HINGE) and 1 W11233362 (HINGE)"
Near Austin, TX 78746
Kevin
Job Details:
07/20/2020
RANGE WHIRLPOOL KODE500ESS04
Arrived on site and found user interface is unresponsive, removed user interface and reset harness connections. After power cycling also found oven is set to Celsius. Corrected through tools and confirmed oven is now operating properly. Job complete"
Near Austin, TX 78717
Wesley
Job Details:
07/20/2020
DRYER WHIRLPOOL WED4815EW1
Arrived onsite for not drying and found unit not air flowing. All else checks good but determined to be clog in venting. Advised customer on repair.
Near Georgetown, TX 78633
Lou
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRF535SWBM00
"Arrived on site to inspect refrigerator water dispenser and ice maker not dispensing water. Upon further inspection, I tested the water dispenser and found the water coming out but not like it should. Removed the filter and tested again and same results only less water. When I removed the filter, I found the filter head housing leaking water.. I removed and replaced the filter head and tested. Unit is operating as designed. No water leaks observed at the end of service, job completed."
Near Round Rock, TX 78665
David S
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRF736SDAM11
"Arrived on site to install previous diagnosed parts. I gained access to the main control and the control panel, I replaced both new. I gained access to the damper control and replaced new. I tested the unit and it is operating as designed. Job complete."
Near Hutto, TX 78634
Cliff
Job Details:
07/20/2020
WASHER AMANA NFW5800HW0
Arrived on site to diagnose a washer that is shaking at the beginning of spin cycles. Tested all parts and found no mechanical failures with washer at this time. Advised homeowner on balancing procedures for newer front load washers. No further repairs are needed and all is working properly at this time.
Near Round Rock, TX 78664
Cliff
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRF954CIHZ00
Arrived on site to replace compressor and filter dryer for refrigerators. Replaced both parts and pulled vacuum on unit. Charged unit with 4.5 ounces of refrigerant. All is working properly at this time. No leaks were found at time of service.
Near Austin, TX 78702
Jacob
Job Details:
07/20/2020
WASHER WHIRLPOOL WFW72HEDW0
"Arrived onsite for unit having F3E1 error code. Put unit in diagnostic. Got F3E1, F5E2, F5E4, F6E3. Found ACU and switch needed to be replaced. Got authorization from landlord.mReplaced both parts. Tested unit. Unit test good. No leaks at this time. Job complete.
Near Lockhart, TX 78644
Noah D
Job Details:
07/20/2020
DRYER AMANA NED4655EW
"Arrived on site to inspect dryer for not heating upon inspection found the element not heating while operating, checked for continuity and voltages, found 120 got to element before being cut off by thermostat, harness also damaged. Ordering correct parts. Office to reschedule ; ordrng 1 3387134 (THERMISTOR ) and 1 W10745655 (HARNESS )"
Near Round Rock, TX 78665
Jonathan S
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL GI5SVAXV00
"Arrived on site to install previous diagnosed part. Removed failed starting device and installed new. Tested amp draw to compressor and found within range. Tested all other operations. All tested good, no water leaks detected.
Near Lampasas, TX 76550
Al
Job Details:
07/20/2020
WASHER WHIRLPOOL WFW86HEBC1
"Arrived to inspect front load washer errors.Found the following codes F3E1, F6E3 and F9E1 long drain error.Disassembled and disconnected the pressure hose and cleared it.Found the drain hose to the wall was in the drain approximately 3 feet with little to no air gap for an idea draining.I ran diagnostics test mode and unit tested as designed without errors.I zip tied the drain hose to the hot water valve with enough room for an adequate airgap.Ran a quick wash cycle and unit tested as designed.Cleaned out the drain holes in the front of the bellow to allow proper draining after wash cycle.All water lines were dry at the end of service.Job complete"
Near Austin, TX 78750
David Z
Job Details:
07/20/2020
DISHWASHER KITCHENAID KUDE70FXSS4
"Arrived on site to diagnose one dishwasher not running, and having to be consistently reset. Perfor,d diagnostic and found errors F4E1 wash motor no comm, F9E2 diverter stuck on,F6E6 water too cool, F8E1 slow drain. Ran unit in diagnostic cycle and heard was motor make one loud spray, and never made any other noise. Provided estimate to customer for a new sump and motor, and also may need a control due to the number of errors present and having to reset.
Near Austin, TX 78757
Scott
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRB322DMBM00
"Arrived on site , replace light switch . All checked normal no water leaks detected at time of service . Job complete ."
Near Killeen, TX 76549
Al
Job Details:
07/20/2020
WASHER WHIRLPOOL WTW5105HW0
"Called Whirlpool Tech line and spoke RICH SR#7728352924.Advised to replace the latch.Removed and replaced the latch, reassembled and unit tested as designed.All water lines were dry at the time of service.Job complete"
Near Georgetown, TX 78633
Lou
Job Details:
07/20/2020
MICROWAVE WHIRLPOOL WOC54EC0HS02
"Arrived on site to install previously diagnosed and ordered parts. Due to the console and main control failures, I removed and replaced both and tested. Unit is operating as designed. Customer was connecting unit to WiFi. Job completed"
Near Del Valle, TX 78617
Jacob
Job Details:
07/20/2020
DRYER MAYTAG MEDC215EW1
Arrived onsite for unit making noise during operation. Tested unit. Found that drum was not touching back wall causing noise issues. Back wall was out of alignment. Let customer know.
Near New Braunfels, TX 78130
Noah D
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRX735SDHZ02
"Arrived on site to inspect fridge for icemaker sounds and broken handle, checked Icemaker sound and found the door sound is what the customer was hearing, fixed handle and checked for problems. No problems found. Complete"
Near Austin, TX 78737
Richard
Job Details:
07/20/2020
VENTHOOD KITCHENAID KXD4636YSS4
Arrived onsite for the vent hood not working. During testing found that the fan motor tested good. Vent motor tested fine. Found that there are about five micro switches that play a factor with fan motor coming on and fan speeds. Along with the push button. Quoted customer for micro switch assembly and push button. ; ordrng 1 W10833182 (covr-swtch) and 1 W11088943 (cntrl-elec) and 1 W11097349 (covr-swtch) and 1 W11098806 (switch) and 1 WPW10398341 (switch)
Near Austin, TX 78746
Luis
Job Details:
07/20/2020
REFRIGERATOR KITCHENAID KRSC500ESS00
"Arrived on site for fresh food not defrosting. Replaced defrost and side thermistor,secured thermistor to correct location on suction line using foil tape and a zip,installed a new fan scroll. Ran diagnostics checked air flow good,changed defrost setting to basic.m"
Near New Braunfels, TX 78132
Robert
Job Details:
07/20/2020
REFRIGERATOR KITCHENAID KRFF707ESS01
"Arrived onsite to replace fan support. Replaced support, tested unit and unit functions correctly. Job complete."
Near Cedar Park, TX 78613
Paul
Job Details:
07/20/2020
DRYER GE GTD42EASJ2WW
Arrived onsite for a dryer that after it was moved and installed it started making a loud screeching noise when turned on. I found the drum hitting the sheet metal on the blower housing causing the noise. I inspected the base in the front under the motor and blower housing and found it dented up causing the issue. The upper bearing assembly is worn also. The unit will need two men and scheduled for 2 hours to make repairs.
Near Marble Falls, TX 78654
James
Job Details:
07/20/2020
REFRIGERATOR FRIGIDAIRE FFSS2615TS2
"Arrived on site and installed new ice maker, valve and tubes. Sealed tube opening and tested operation. Unit tests good. Job complete"
Near Pflugerville, TX 78660
Kayman
Job Details:
07/20/2020
RANGE AMANA AGR4230BAB3
Arrived onsite for range with FL burner not igniting I inspected hat burner and could not get it to light I removed the burner head and replaced with new and the burner will light 9 out of 10 times. I am ordering (WPW10636224) burner head (WP98017461) cap (WPW10209657) ignitor (WP98017348) orifice.. ; ordrng 1 WP98017348 (orifice) and 1 WP98017461 (cap-burner) and 1 WPW10209657 (igntr-surf) and 1 WPW10636224 (burnr-top)
Near Austin, TX 78731
Paul
Job Details:
07/20/2020
DISHWASHER KITCHENAID KDTE704DSS0
Arrived onsite for a dishwasher that is not working. Ms stated sometimes it just shuts off and nothing responds. I ran the diagnostics cycle and found no stored error codes. I found the u it shutting off as soon as the vent fan started. The motor is shorting out. I found the pro wash selection on the control panel not working. I replaced the control panel and the vent fan. I ran the auto diagnostics cycle again and the unit worked as designed. Call complete.
Near Georgetown, TX 78633
Lou
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL GSC25C4EYY01
"Arrived on site to inspect refrigerator with no water dispensing. Upon further inspection, customer advised that the unit isn’t making ice or dispensing water. I removed the toe plate key the wiring at the bottom left hinge and it was good. I tested the water dispenser and could hear the valve working, but still no water. I disconnected the water line at the bottom left hinge area and tested the dispenser and a little bit of water came out but then stopped. I removed the filter and tested the water dispenser and water came out. Customer advised it’s a new filter. Due to the prescreened part I was sent with wing defective, I am ordering another housing and CNOTE-LSO PER CUSTOMER REQUEST and scheduled return service No water leaks observed during service and water to the unit was turned off for safety.; ordrng 1 WPW10238123 (housing)"
Near Buda, TX 78610
Leonardo
Job Details:
07/20/2020
MICROWAVE WHIRLPOOL WMH31017HS3
Arrived on site to test unit for unit spraying grease. Test unit and found unit not venting out and found fan working as designed at this time.
Near Austin, TX 78746
Kevin
Job Details:
07/20/2020
WASHER WHIRLPOOL WTW6120HW0
"Arrived on site and inspected washer and found sudsing saved error codes, adjusted load and go detergent dispenser per techline recommendation and discussed correct loading and specific wash options. Washer is operating properly, job complete 7728358550"
Near Austin, TX 78737
Kevin
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL KRFF507HPS00
Arrived on site and inspected refrigerator and found condenser fan assembly is destroyed. Found damage to the left-hand side of the refrigerator cabinet and evidence of something impacted the compressor and glanced off to crush condensor fan assembly. Reported condition of refrigerator t No water leaks from connections at time of service
Near Georgetown, TX 78626
David S
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRS325FDAM04
Arrived on site for fridge lights not working. I inspected the unit and work area. I found the freezer light not working and the fresh food lights dim. The customer agreed. I replaced the freezer led and all the lights came on bright. Customer paid in full with credit card.
Near Canyon Lake, TX 78130
Robert
Job Details:
07/20/2020
WASHER WHIRLPOOL WFW5620HW0
"Arrived onsite to test unit for leaks. Tested unit and found leak coming from torn bellow. Replaced bellow, tested unit and unit does not leak. Job complete"
Near Round Rock, TX 78664
Cliff
Job Details:
07/20/2020
DISHWASHER KITCHENAID KDTM404EWH3
Arrived on site to install previously ordered parts for dishwasher. Installed new control and tested unit. Found drain pump and all other components fully functional. No further repairs are needed and no leaks were found at time of service.
Near Austin, TX 78724
Eman J.
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRF555SDFZ04
Arrived onsite for refrigerator not making ice. Tested system. Found ice maker frozen. Defrosted ice maker. Tested system. Everything works as designed. Job complete.
Near Georgetown, TX 78626
Jonathan S
Job Details:
07/20/2020
WASHER MAYTAG MVWX655DW1
"Arrived on site to install previous diagnosed part. Removed failed inlet valve and installed new. Performed diagnostics mode and tested all operations. All tested good, no water leaks detected.
Near Round Rock, TX 78664
Kayman
Job Details:
07/20/2020
COOKTOP WHIRLPOOL WFE525S0JS0
Arrived onsite for cooktop with LR element not coming on but the cooktop on indicator light illuminated. I removed the glass cooktop and inspected that element. I found a visible break/short in the coils of that element. I replaced the surface element and the unit is working as designed. Job complete.
Near Georgetown, TX 78633
Lou
Job Details:
07/20/2020
DISHWASHER KITCHENAID KDTM404ESS3
"Arrived on site to inspect dishwasher gasket falling off. Upon further inspection, I found the gasket secured on the sides, but hanging down from the top. I inspected the gasket and found it torn on the left side. I put the gasket back into place and test3d the upper rack sliding it out and back in and found that the left side of the upper rack is snagging the gasket when sliding the rack out. I removed and replaced the gasket and adjusted the upper rack to where it would clear the sides of the tub when sliding in and out. Tested the unit and it is operating as designed. No water leaks observed during service, job completed."
Near Austin, TX 78717
Wesley
Job Details:
07/20/2020
DISHWASHER WHIRLPOOL WDF320PADS3
Arrived onsite and found unit had electrical issue at block. Repaired unit. All checks good. Operating as designed.
Near Buda, TX 78610
Robert
Job Details:
07/20/2020
RANGE WHIRLPOOL WFG505M0BS3
"Arrived onsite to replace LF valve. Replaced valve, tested unit and unit functions correctly. No issues with flames. Job complete."
Near Round Rock, TX 78681
Paul
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRF990SLAM00
Arrived onsite for a refrigerator not cooling properly and no ice. Upon arrival I found the ice bin full and both compartments at temp. Mr stated that when it first happened the RC coil had some frost on it coming out of the lower vents on the evaporator cover but he cleared the frost. I found the unit working as designed but explained to mr that I would set the unit to an 8 hour defrost instead of the adaptive defrost to see if this helps. I changed the defrost setting. Call complete.
Near Pflugerville, TX 78660
David S
Job Details:
07/20/2020
DRYER MAYTAG MEDC465HW0
"Arrived on site for dryer making a noise and having a burning smell. I inspected the unit and work area. I gained access to the inside of the dryer cabinet and found rubber shavings from the guide wheels. I vacuumed out the rubber shavings from the dryer and replaced the belt, guide wheels and pulley. I inspected the heating element and found nothing burning on the element. I spoke with customer about what I found inside the unit. Job complete."
Near Pflugerville, TX 78660
David S
Job Details:
07/20/2020
MICROWAVE WHIRLPOOL WMH53521HZ4
Arrived on site to install previous diagnosed part. I removed the damaged door and replaced with new. I inspected the door and found no imperfections. The customer inspected and agreed. Job complete.
Near Round Rock, TX 78665
David S
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRF535SMBM00
"Arrived on site for the ice maker not working. I gained access to the ice maker and tried to jump it, the ice maker won’t harvest. I quoted the customer for the ice maker. I installed the new ice maker and jumped it the ice maker harvested and did not fill with water. I installed the new valve and tested the unit. The unit is operating as designed. Job complete no water leaks detected."
Near Kingsland, TX 78639
James
Job Details:
07/20/2020
WASHER WHIRLPOOL WFC8090GX0
Arrived on site and installed new pump. Tested operation and found unit working properly. Job complete
Near Austin, TX 78749
Luis
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL ED5VHEXVQ01
"Arrived on site for cooling issue. Unit off,hit upper control box,unit powered on,diagnosed a defective thermostat. Replaced defective thermostat
Near Austin, TX 78752
Scott
Job Details:
07/20/2020
WASHER WHIRLPOOL WTW4816FW2
"Arrived on site for washer tripping breaker . Found cap had fallen down and broke a wire so every time washer would go into spin it would trip breaker . Replaced cap and fixed wire . Ran calibration and diagnostics,all checked normal . No water leaks detected at time of service. Job complete ."
Near Cedar Park, TX 78613
Lou
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL GI6SDRXXY00
"Arrived on site to inspect refrigerator ice maker not working. Upon further inspection, I saw water on the floor and it appeared to be coming from the unit. I checked the temps in the FC section ad it was 2 degrees. I checked the RC section and found a block of ice at the bottom the RC section. I found at the back right corner where it appeared that water was dripping from the waterbox area. I removed the waterbox cover and tested the water dispenser and when I tested the dispenser, the ice maker cycled water and water began to leak from the back of the waterbox at the top where the ice maker fill tube comes out of the cabinet. I found that the ice maker fill tube had popped out of the cabinet at the top of ice maker at the back left corner. Using some permagum and foil tape, I was able to secure the fill tube in its space and used the foil tape to hold it being as the cover was missing. I cleared the ice and retested the ice maker and it is operati
Near Austin, TX 78745
Kevin
Job Details:
07/20/2020
WASHER WHIRLPOOL WTW4816FW2
"Arrived on site and inspected washer and found no saved error codes, ran all functions in manual diagnostic and everything checks fine. Ran an automatic test cycle and a calibration cycle and both passed properly. Customer is letting washer fill before adding clothing. Discussed correct loading procedure, correct soap usage, and noise expectations with customer. No further repair is required at this time, no water leaks from connections at time of service, job complete"
Near Austin, TX 78748
Kevin
Job Details:
07/20/2020
DRYER WHIRLPOOL WED4850HW0
"Arrived on site and inspected dryer and found it is heating properly but there is no airflow through screen. Removed send hose from rear of dryer and airflow has returned. Went to the exterior will need to be cleared/cleaned before dryer should be used again. No further repair is required at this time, job complete"
Near Austin, TX 78750
David Z
Job Details:
07/20/2020
REFRIGERATOR WHIRLPOOL WRF767SDHZ00
Arrived on site to diagnose refrigerator with light out in freezer and top lights in RC. Performed diagnostic and found freezer LeD out. Replaced freezer Led. Retested and all lights are now on as designed. Call complete.
Near Hutto, TX 78634
David S
Job Details:
07/20/2020
MICROWAVE WHIRLPOOL WMH31017HS4
Arrived on site for microwave door being damaged. I inspected the unit and work area. I found the door scratched. I removed the damaged door and replaced with new. I tested the units operation and it functions as designed. I set the clocks on the range and microwave. Job complete.
Near Cedar Park, TX 78613
David Z
Job Details:
07/20/2020
DISHWASHER MAYTAG MDB8959SFZ4
"Arrived on site to diagnose dishwasher with report of leaking coming from door. Customer informed me this has only happened once so far and hasn’t happened Since, and additional cycles have been run. Ran diagnostic cycle and could not see any leaking.opened door and saw a large amount of suds built up in the tub. Unit is likely running suds over the floor pan due to the large amount of buildup in the tub. Advised customer to run a cleaner through unit to break down soap and this should resolve any leaks. Call complete."
Near Austin, TX 78723
Eman J.
Job Details:
07/20/2020
RANGE WHIRLPOOL WFG515S0JB0
Arrived onsite for previous diagnosed parts. Replaced burner head. Tested system. Everything works as designed. Job complete.
Near Austin, TX 78728
Kayman
Job Details:
07/20/2020
RANGE WHIRLPOOL WFG525S0HS1
Arrived onsite for range not igniting in preheat. I inspected the unit and found the oven section ignitor was warped and not making connection to ignite the manifold. I replaced the ignitor and the unit is working as designed. Job complete.
Near Austin, TX 78757
Scott
Job Details:
07/20/2020
DISHWASHER KITCHENAID KDTE334GPS0
Arrived on site for upper rack falling down . Found right side rail broken at weld . Replaced both rails . No charge per service pointer . No water leaks detected at time of service.job complete .
Near Canyon Lake, TX 78130
Noah D
Job Details:
07/17/2020
DRYER WHIRLPOOL WED5620HW1
"Arrived on site to inspect dryer for sounds, upon inspection found the console dead, 10 volts to console with no lights, ordering console and harness. Office to reschedule ; ordrng 1 W11160620 (HARNESS) and 1 W11314470 (CONSOLE )"
Near Austin, TX 78752
Jacob
Job Details:
07/17/2020
RANGE WHIRLPOOL WFE505W0JS0
Arrived onsite for control panel to unit have damage. Looked at panel. Saw damage. Replaced panel. No issues at this time. Job complete
Near Austin, TX 78701
Luis
Job Details:
07/17/2020
REFRIGERATOR WHIRLPOOL WRF555SDFZ08
Arrived on site for damaged handles. Replaced all handles
Near Smithville, TX 78957
Cliff
Job Details:
07/17/2020
REFRIGERATOR GE GSS23GGKNCWW
Arrived on site to perform sealed system repair for refrigerator. Replaced locked up compressor and filter dryer. Tested unit and found all is functioning properly at this time. No leaks were found at time of service.
Near Austin, TX 78734
Brandon
Job Details:
07/17/2020
DISHWASHER WHIRLPOOL JDB9200CWX3
"Arrived on site to replace tracks, I could not pull unit out due to wood trim piece not allowing unit to be removed, customer is going to have someone remove wood trim to make unit accessible. ; ordrng 1 CNOTE (OFFICE TO RESCHEDULE ) and 2 W10546503 (adjuster)s"
Near Spicewood, TX 78669
Brandon
Job Details:
07/17/2020
WASHER MAYTAG N/A111
"Arrived on site for customer complaint of unit not completing cycle, found error codes F5e3 f6e2,
Near Burnet, TX 78611
James
Job Details:
07/17/2020
WASHER MAYTAG MVWB865GW0
"Arrived on site and tested operation. Found drain pump not energizing. Inspected pump and found harness to pump broken. Found pump has broken off of tub due to off balanced condition. Unit will need new harness, tub, gear case and drain pump to repair. Office to schedule return services for 2 hours; ordrng 1 W10811956 (GEARCASE) and 1 W11219115 (TUB) and 1 W11409746 (HARNESS)"
Near Waco, TX 76710
Jonathan M
Job Details:
07/17/2020
RANGE WHIRLPOOL WFE505W0HS1
"Arrived on site for range that is not heating. Inspected unit and work area. Customer advised the issue is not with he unit honor heating but wi5 the unit showing an error code every time they try to use it. Inspected unit and found an error code of F1 E0 (main control fault). Unplugged unit and power cycled unit. Removed error code and tested unit in a back cycle. Unit ran as designed. I called Techline and spoke to Steve SR# 7728348742. He advised anytime you get that code on this unit, we need to replace the control and clearing error codes and/or power cycling the unit won’t completely fix the issue. Ordering control board and will return . ; ordrng 1 W11314391 (cntrl-elec)"
Near Harker Heights, TX 76548
Tyler
Job Details:
07/17/2020
WASHER MAYTAG MHW6630HW0
Arrived on site for washer that had a leak and was giving a low flow error code according to customer. After speaking with the customer they did state that the washer only leak one time since our last repair and it was a very small amount of water and that it has not done it since it is very possible at this point that the water was just a little bit of residual water left over from initial repair of drain pump after running multiple diagnostic test on the machine I could not find any leaks anywhere occurring at any point during the wash cycles. As for the low flow Error code I put the machine in the diagnostics and found an F8E1 area code stating that the cold water inlet valve was having a problem I’ll check the connections on the wall and found that the wall connections were turned halfway off so I adjusted water cut off valves I also reset the machine and cleared out the area codes and found that the machine was working perfectly fine at this point with no
Near Seguin, TX 78155
Noah D
Job Details:
07/17/2020
WASHER WHIRLPOOL WTW4915EW2
Near Austin, TX 78745
Leonardo
Job Details:
07/17/2020
RANGE WHIRLPOOL WFE320M0JS0
Arrived on site to test unit for damaged panel. Found 4108 was not damaged job complete
Near Austin, TX 78745
Leonardo
Job Details:
07/17/2020
DISHWASHER WHIRLPOOL WDF330PAHS3
Arrived on site to test unit for unit leaking. Test unit and found drain hose connection had come loose. Secured connection test unit and unit test good job complete.
Near Austin, TX 78734
Brandon
Job Details:
07/17/2020
WASHER MAYTAG Mvwb700vq0
"Arrived on site for customer complaint of loud noise and unit not spinning properly, found loose bolt on rotor, as well as tub bearings going out. I put unit into diagnostic mode, found basket would not engage to spin cycle, I removed inner basket, found lots of oil from bearing and worn out hub. I tightened the loose nut on rotor, ordering outer tub with bearings and hub. ; ordrng 1 CNOTE (AUTH) and 1 CNOTE (OFFICE TO RESCHEDULE ) and 1 W10128830 (tub/drive shaft assy)"
Near Austin, TX 78701
Luis
Job Details:
07/17/2020
REFRIGERATOR WHIRLPOOL WRF555SDFZ08
Arrived on site for damaged ui. Installed a new ui control tested ui operations good.
Near Liberty Hill, TX 78642
Al
Job Details:
07/17/2020
MICROWAVE WHIRLPOOL WMH32519HZ3
Arrived to inspect microwave light not turning off.Confirmed the complaint and removed and replaced control.Job complete
Near Austin, TX 78727
David Z
Job Details:
07/17/2020
REFRIGERATOR GE HA10TG31SS
"Arrived on site to diagnose refrigerator that customer said was still feeling hot. On arrival customer informed me another company has come out prior and performed the pointer WR49X30819-Compressor-Electricals-and-Condensate-Pan-Kit. This pertains to reducing the heat levels. Checked unit and everything feels cool to the touch with no indication of any unit part failures. Called and talked to CS in office for any advice and there is no repair that needs to be made on the unit, all is working as designed at this time. Call complete."
Near Bastrop, TX 78602
Cliff
Job Details:
07/17/2020
WASHER MAYTAG MVWX655DW1
Arrived on site to diagnose a washer that is shaking abnormally during spin cycles. Tested unit and found suspension worn due to unbalanced hub assembly. Hub will need to be replaced to complete repairs. I replace suspension today.; ordrng 1 W10528947 (drive hub kit)
Near Austin, TX 78737
Robert
Job Details:
07/17/2020
REFRIGERATOR GE TFX28PBBAWW
Arrived onsite to test unit despiser pad being stuck. Need to order display panel and dispenser pad.. ; saved tckt
Near New Braunfels, TX 78130
Noah D
Job Details:
07/17/2020
DRYER MAYTAG MEDB835DW4
"Arrived on site to inspect dryer for loud scraping noises, upon inspection found the wheels screeching and making loud noises. Replaced wheels. No problems found. Complete"
Near Burnet, TX 78611
Jonathan S
Job Details:
07/17/2020
WASHER MAYTAG MHW5630HC0
Arrived on site to install previous diagnosed parts. Removed dispenser and installed new. Removed failed control and installed new. Tested unit and found no response from UI. Checked terminal connector and found correct. Removed new control and installed old and tested. Found voltage going to UI and no response from UI. Will need to replace UI with control. Office to schedule appointment when ETA is available.; ordrng 1 W11322901 (CONTROL) and 1 W11325569 (CONTROL)
Near Hutto, TX 78634
David S
Job Details:
07/17/2020
DISHWASHER WHIRLPOOL WDF330PAHS2
Arrived on site for dishwasher not irking. I inspected the unit and work area. Customer stated the dishwasher isn’t filling with water and the only reason it has water in it right now is from wet dishes. I tried to drain the unit but the drain pump wouldn’t come on. I pulled the connector from the drain pump and found no voltage going to the drain pump indicating the control is bad. I replaced the main control and tested the unit. The unit is now operating as designed no water Leaks detected.
Near Granger, TX 76530
Al
Job Details:
07/17/2020
DISHWASHER WHIRLPOOL WDT710PAYM5
Arrived to inspect dishwasher not cleaning dishes..All water lines were dry at the time of service.Job complete
Near Wimberley, TX 78676
Robert
Job Details:
07/17/2020
REFRIGERATOR KITCHENAID KRMF706ESS01
"Arrived on job to replace motor,shaft and control. Replaced parts and icemaker despiser is fully operational. The unit still requires drawer wire harness, need to order part. Office to reschedule. Send RP.; ordrng 1 W11397195 (HARNESS)"
Near Liberty Hill, TX 78642
Jonathan S
Job Details:
07/17/2020
REFRIGERATOR WHIRLPOOL WRF993FIFM00
"(JJ) Arrived on site for fridge FC icemaker not producing ice. Attempted to perform diagnosis and was not able to get unit into diagnosis mode. Powered unit off at circuit breaker and performed diagnostics mode. After several attempts it went into test mode. Icemaker thermistor was opened. Removed ice,alter and measured icemaker resistance and found thermistor open.. Installed new ice,aker. Tested icemaker harvest and fill cycles. No water leaks detected during service.
Near Burnet, TX 78611
James
Job Details:
07/17/2020
DISHWASHER KITCHENAID KDTE254ESS2
Arrived on site and tested operation. Customer stated that the unit will finish a cycle and randomly trip breaker while not in use. Found no fault codes in memes and all functions test good in diagnostics. Found control very hot after diagnostics has ended and there is a capacitor on the control that has visibly failed. Installed new control W10866124 and tested operation. Unit tests good. Job complete
Near China Spring, TX 76633
Jonathan M
Job Details:
07/17/2020
REFRIGERATOR WHIRLPOOL WRS321SDHV
"Arrived on site for refrigerator that is not cooling and is making a clicking sound. Inspected unit and work area. Found unit evaporator fans running but the compressor not running. Removed back cover and found condenser fan not plugged in. The compressor was hot to touch and heard the unit try to start the compressor. Customer stated that that was the sound she was hearing. Tested starting device and found starting device and failed. Replaced starting device and plugged in condenser fan. Compressor was too hot for it to kick on. I advise the customer to give the unit 24 hours to cool down before plugging it back in. Advised that if the issue continues to persist, they would most likely be an issue with a sealed system due to the unit not running with the condenser fan for a year and a half and compressor not kicking on. Customer will call back if further issues persist. Call complete."