Near Austin, TX 78759
Paul
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL WDF130PAHB0 Arrived onsite for the dishwasher not drying the dishes. I ran diagnostics and checked stored error codes. There were no stored codes and the unit completed the cycle and worked as designed drawing 8.4 amps with the heater energized in the wash cycle and at the start of the dry cycle. This unit is not manufactured with a automatic rinse aid dispenser. I went over detergent use with the customer. I went over cleaning the filters with the customer. There were no water leaks present at the time of service. Call complete. I called techline and spoke with Steve SR# 7723383691. Steve advised pods with rinse aid in them.
Near Austin, TX 78750
Paul
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL WRF757SDEM01 Arrived onsite for the refrigerator with a no ice condition and both sections not cooling properly. Ms stated both compartments had been cooling properly since I was here last but not much ice has been made. I found the ice bin completely full and showed ms. I checked the RC temp and it was at 37.7 degrees and the coil was clear. The FC temp was at -1.1 degrees. The ice maker had no error codes. I ran the harvest cycle and it dumped the ice. The unit is working as designed. There were no water leaks present at the time of service. Call complete.
Near Austin, TX 78750
Paul
Job Details: 11/08/2018
WASHER MAYTAG MVWX655DW1 Arrived onsite for the washer making grinding and rubbing noises. Ms stated that she found out that the washer sounds normal but was concerned about green rubber type particles that had been coming out of the washer and into the clothes. I took photos of the green particles. I checked the tub and under the wash plate and it was clean. Ms stated that Customer Care told her that it was probably a releasing agent use on the mold when the tubs are made that probably wasn’t removed properly. I checked the unit for stored fault codes and there were none. I ran the auto diagnostics cycle and the unit sounds and works as designed. I called techline and spoke with David SR# 7723385763. David said he had never heard of this but documented my findings. Call complete.
Near Austin, TX 78757
Paul
Job Details: 11/08/2018
ICE MACHINE KITCHENAID KUIC15PHZS0 "Arrived onsite for the icemaker that the needs cleaning light remains on after a cleaning cycle was run and in a regular cycle the reservoir fills and it starts circulating then drains out. I found the WLS defective causing the cleaning cycle to get interrupted, the control defaulting to a 3 minute fill time, and causing the reservoir to drain in a regular cycle just like it’s stated in TSP# 10747218 I quoted the customer SENSOR . I replaced the sensor and tested the unit. The units water fill cycle cycled off on the sensor like it should. I set the unit in a cleaning cycle and explained to mr that the needs cleaning light should go out now and if not to give us a call because the control would need to be replaced. There were no water leaks present at the time of service. Call complete."
Near Austin, TX 78758
Paul
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL WDF520PADB7 "Arrived onsite for the dishwasher with the door not closing correctly. Ms stated that the door really isn’t the issue but the machine leaks water. I found evidence of a field rat where it chewed up the sound barrier, the drain pump, and ate thru the sump. The sump and motor along with the drain pump will need to be replaced. From what I could see, all the hoses and the wire harness are good. I quoted the customer PUMP&MOTOR+ PUMP-DRAIN . Customer is going to replace the machine. Call complete."
Near San Marcos, TX 78666
Robert
Job Details: 11/08/2018
OVEN WHIRLPOOL WFG505M0BS3 Arrived on job for complaints of temperature too hi. Ran calibration to adjust temperature. No gas leaks detected. Job complete
Near Austin, TX 78723
Joseph C.
Job Details: 11/08/2018
WASHER WHIRLPOOL CAE2745FQ0 "Arrived on site for “dead unit” complaint. Inspected unit and could not get control to respond. Rear led was lit. Acquired approval from insurer, to change board. Removed and replaced board. Powered up unit and sparks came from behind control knob. Found no burned areas and all plugs making good contact. Ordering new control. No leaks detected, at time of service. Return for repairs on 11/13.; ordrng 1 W11188527 (W11188527)"
Near San Marcos, TX 78666
Robert
Job Details: 11/08/2018
WASHER GE GTW680BSJ0WS Arrived on job for complaints of not spinning. Ran diagnostics and got code #8 pressure sensor #16 slow drain #18 drain pump failed. Check pressure hose and cut tip to reseat to control also check for blockage. Run test #10 test sensor sensor test good. Run test#14 spin test good. No leaks detected.
Near Georgetown, TX 78628
Steve C.
Job Details: 11/08/2018
COOKTOP JENN-AIR JGCP536WP01 Arrived on site to replace the harness for the right front burner. Found the new part is incorrect and verified with Tommy. Will need to order the ignition harness and tech to verify part before scheduling customer.; ordrng 1 CNOTE (TECH2VERIFY) and 1 W10363277 (harns-wire)
Near Austin, TX 78745
Kevin
Job Details: 11/08/2018
WASHER MAYTAG MVWB725BW0 "Arrived on site and set washer into diagnostic cycle and found no saved error codes. Ran spin cycle and could detect the beginning of a bearing failure. Quoted customer for repair, bearing kit. customer will not be continuing with repair at this time, collected service fee."
Near Kyle, TX 78640
Leonardo
Job Details: 11/08/2018
COOKTOP GE JB968SOK1SS Arrived on site to replaced board. Replaced board test unit and broiler burned out. Replaced broiler element test unit and unit test good job complete
Near Austin, TX 78738
Cliff
Job Details: 11/08/2018
RANGE KITCHENAID KDRU783VSS03 Arrived on site to diagnose an oven that is throwing error codes and not operating. Tested unit and found communication error due to failed 30 inch oven appliances manager control. Replaced control and found oven now functional but oven light still not operating due to defective control. Re-ordering control and return date set for 11/13/18. Parts are covered by manufacturer five year parts warranty and only labor charges due from homeowner.Svc/Lbr; ordrng 1 W10876298 (cntrl-elec)
Near Bee Cave, TX 78738
Cliff
Job Details: 11/08/2018
REFRIGERATOR KITCHENAID KRFC704FPS00 "Arrived on site to diagnose a refrigerator that is not cooling properly. Found fresh food evaporator completely encased in ice due to a miscommunication with the controls and defrost sensor’s. Orion control, main control, and evaporator cover will need to be replaced to complete the frosting issue. Also noted odd behavior from UI during diagnostic test. User interface will need to be replaced as well to complete repair. Return date is set for 11/13/18. Advised homeowner to defrost unit at least 48 hours prior to service and had defrost waiver signed.; ordrng 1 W11039890 (cntrl-elec) and 1 W11167902 (COVER) and 1 W11169516 (CONTROL)"
Near New Braunfels, TX 78132
Diego G.
Job Details: 11/08/2018
MICROWAVE WHIRLPOOL WMH31017AS2 Arrived on site. Check for turntable issues. Found turntable and lightbulb not working. Verify no voltage going to light and turn table. Tested all switches all checked OK. Will need main board to repair unit.
Near New Braunfels, TX 78132
Diego G.
Job Details: 11/08/2018
MICROWAVE WHIRLPOOL WMH31017AS2 Arrived on site. Check for turntable issues. Found turntable and lightbulb not working. Verify no voltage going to light and turn table. Tested all switches all checked OK. Will need main board to repair unit.
Near New Braunfels, TX 78132
Diego G.
Job Details: 11/08/2018
MICROWAVE WHIRLPOOL WMH31017AS2 Arrived on site. Check for turntable issues. Found turntable and lightbulb not working. Verify no voltage going to light and turn table. Tested all switches all checked OK. Will need main board to repair unit.
Near Mountain City, TX 78610
Leonardo
Job Details: 11/08/2018
RANGE MAYTAG MER8775AS0 Arrived on site to test unit for no baking. Test unit and found broken bake element replaced bake element . Test unit by heating to 350 and unit test good job complete
Near Austin, TX 78749
Kevin
Job Details: 11/08/2018
WASHER WHIRLPOOL WTW7500GW0 "Arrived on site and found customer has a video of wash her during the agitation cycle making a clicking noise. The snow is is intermittent and was not duplicated when a load was started during the service call, the agitation cycle sounds normal. Spoke with tech line and they recommended replacing the slider and clutch SR7723385239 no water leaks from connections at time of service.; ordrng 1 W10447975 (slider) and 1 W10817398 (clutch)"
Near Marble Falls, TX 78654
Thomas L.
Job Details: 11/08/2018
WASHER WHIRLPOOL WTW8900BC0 Arrived on site for noise the operation. Found drain pump is noisy. Will do the washer repair on the return visit for the dryer as a customer needs to leave.; schdld next appmnt for 11/12 MON 8-12
Near Austin, TX 78748
Leonardo
Job Details: 11/08/2018
OVEN KITCHENAID KSEG700ESS2 Arrived on site to replace panel and fan. Replaced both parts test unit and unit test good job complete
Near Austin, TX 78733
Kevin
Job Details: 11/08/2018
DRYER WHIRLPOOL MED3500FW1 "arrived on site and found dryer is making a vibration noise while it is running added sound pads underneath motor mount and between fan shroud and cabinet bottom. Documented call with tech line SR7723383496 If this does not correct issue order, order ground, fan blade, and fan shroud will be needed. No lint found in dryer at time of service"
Near Austin, TX 78748
Leonardo
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL WDF330PAHW0 Arrived on site to test unit for unit coming forward when door opens. Found unit had come off the brackets. Secured unit to brackets and cabinet unit not coming forward any more. Job complete
Near Austin, TX 78737
Leonardo
Job Details: 11/08/2018
MICROWAVE GE JE1540GV02 Arrived on site to to replaced all parts. Replaced diode and magnetron and capacitor and all 3 switches parts test unit and unit heating correctly job complete.
Near Temple, TX 76502
Al
Job Details: 11/08/2018
WASHER WHIRLPOOL Wtw8000BW0 "Arrived to inspect (NOT SPINNING OR RINSING) issue. Washer was put in diagnostic mode and displayed OL code. During test tub rubbed, made noise and will need a bearing job. Office to order (W10435302) & (W10447783). No leaks observed at the conclusion of service test mode. Zip tie applied to drain hoseCNOTE- PLEASE ALLOW 2 hr window and bearing kit for tech to complete service.; ordrng 1 CNOTE (PROVIDE 2 HOURS WINDOW AND KIT) and 1 W10435302 (BEARING ASSEMBLY) and 1 W10447783 (BEARING KIT/ TOOL)"
Near Austin, TX 78737
Leonardo
Job Details: 11/08/2018
OVEN WHIRLPOOL RBS307PVB03 "Arrived on site to test unit for turning off. Test unit and unit test good at this time. Test board and fuse and power coming in. Unit working as designed, advised customer to check electrical by getting an electrician to check junction and breaker"
Near Marble Falls, TX 78654
Thomas L.
Job Details: 11/08/2018
DRYER WHIRLPOOL WED8900BC Arrived on site to Test unit for filter issue. Found that the filter does not fit into the housing properly because the housing is bowed. Will order a new filter housing.; ordrng 1 W11117302 (grill-out) and 1 W11129408 (housng-out)
Near Austin, TX 78759
Paul
Job Details: 11/08/2018
REFRIGERATOR KITCHENAID KBRA20ERSS "Arrived onsite for the refrigerator to replace the previous diagnosed defective parts. I replaced the control, RC thermistor, and the dampener control. I tested the unit and it is working as designed. Call complete."
Near Austin, TX 78751
Joseph C.
Job Details: 11/08/2018
OVEN MAYTAG MGR6600FZ0 "Arrived on site for “broken inner door glass” complaint. Inspected unit and found back door glass shattered. Vacuumed shards from unit and installed new door glass. Tested unit. Unit is performing as designed. No leaks detected, at time of service."
Near Austin, TX 78735
Luis
Job Details: 11/08/2018
REFRIGERATOR KITCHENAID KSCS23FTMS02 Arrived on site for no cool. Powered unit on found control shutting itself off diagnosed failed main control unit will need updated control kit. Return date set for sat 11/10; ordrng 1 CNOTE (LM ONLY) and 1 W10823803 (CONTROL )
Near Austin, TX 78723
Joseph C.
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL WRF560SMYM05 "Arrived on site for “frost buildup, in freezer” complaint. Inspected unit and found bottom of door hitting bottom lip of freezer compartment. Raised door. Checked unit. Door is closing as designed. No leaks detected, at time of service."
Near Round Rock, TX 78665
Tyler B.
Job Details: 11/08/2018
REFRIGERATOR KITCHENAID KFIV29PCMS00 "Arrived on site for no ice, ran diag found unit ice level sensor faulted empty bus let and unit shows full. Ordering emitter and will use receiver on RV. No leaks on site ; ordrng 1 W10870822 (cntrl-elec ICE)"
Near Spicewood, TX 78669
Cliff
Job Details: 11/08/2018
RANGE WHIRLPOOL WOS51EC7HS00 Arrived on site to diagnose an oven with a damaged door. Tested unit and found door dented in the lower left-hand corner. Replaced outer door panel and name badge and tested unit. Found all is functioning properly at this time.
Near Austin, TX 78745
Luis
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL ET4CSKXKQ00 "Arrived on site for no cool in fresh food. Removed evap cover found fan not running voltage to fan diagnosed failed Evap fan motor. Found ice in drain and bottom of freezer compartment advised customer to defrost unit for 24 to remove blockage in drain. Installed new evaporator fan motor,powered unit on checked fan motor unit working as designed."
Near Georgetown, TX 78633
Tyler B.
Job Details: 11/08/2018
MICROWAVE WHIRLPOOL GMH3204XVS2 Arrived on site for broken handle. Gave customer a quote for handle
Near The Hills, TX 78738
Cliff
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL WDT730PAHZ0 Arrived on site to diagnose a dishwasher that is not closing properly. Tested unit and found handle has come off due to defective set screws and handle assembly. Homeowner provided new handle. Installed new handle and tested unit. Found all is functioning properly at this time. No leaks were found at time of service.
Near Austin, TX 78723
Joseph C.
Job Details: 11/08/2018
MICROWAVE WHIRLPOOL WMH31017FS0 Arrived on site for “door close error” complaint. Inspected unit and found burned switches. Removed and replaced switches and interlocks. Installed two switches incorrectly and blew fuse. Removed and replaced fuse and corrected switches" unit is performing as designed.
Near Lakeway, TX 78734
Cliff
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL GI6SARXXF04 Arrived on site to diagnose a refrigerator that is leaking. Tested unit and found drain grommet clogged. Replaced grommet with drain tube kit and tested unit. Found all is functioning properly at this time. No leaks were found at time of service. Drain kit
Near Austin, TX 78732
Cliff
Job Details: 11/08/2018
COOKTOP WHIRLPOOL SC8720EDB3 Went on site to diagnose a cooktop that is sparking when not in use. Tested unit and found no mechanical failures at this time. All parts and components are working properly. Advised homeowner on possible moisture build up inside switch which caused issue and has now dried out correcting failure. No repairs are needed at this time.
Near Harker Heights, TX 76548
Arthur B.
Job Details: 11/08/2018
REFRIGERATOR GE GNE26GSDDSS Arrived onsite for customer complaint of french door refrigerator not cooling in RC section. Found unit is cool but cooling fan not circulating air. Unit will need new cooling fan. Found fan is discontinued. AHS will attempt to locate part. OF to R/S. No water connected to unit.; ordrng 1 CNOTE (NEEDS AUTHO) and 1 WR17X13142 (evap cover asm ff) and 1 WR60X10357 (FF EVAP MTR)
Near Round Rock, TX 78665
Tyler B.
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL WRX735SDHZ "Arrived on site for ice bucket suck and water build up on freezer gasket. Got ice bucket out, found ice maker not responding to test. R&R ice maker and tested good, found rails not fully installed, disassembled freezer sec. And reinstalled components as designed"
Near Temple, TX 76502
Al
Job Details: 11/08/2018
DRYER WHIRLPOOL WED4815EW "Arrived to inspect (Asset isn't heating well. Limited quantity of lint.) Tested the unit with the vent tester and discovered problem was not with the dryer, but with the ventilation system in the newly built house. Customer to contact builder for repair. All lint was cleaned while on-site. JOB COMPLETE."
Near Belton, TX 76513
Al
Job Details: 11/08/2018
WASHER WHIRLPOOL WFW96HEAC0 "Arrived on site for (NOW THE TIMER GETS STUCK AND THE UNIT IS RUNNING 45 MINUTES LONGER). Ran diagnostics test , unit showed no error codes. Customer did admit to filling soap dispenser up for each wash. Washer showed signs of excessive suds during diagnostic mode. Customer will cut back on soap use in the future. All water lines were dry at the time of service, no leaks observed. JOB COMPLETE."
Near Temple, TX 76502
Al
Job Details: 11/08/2018
DISHWASHER GE GSD2000G00WW "Arrived on site for (NOT STARTING ANY CYCLES- NOT FILLING W/ ANY WATER- NOT MAKING NOISES- UNIT WENT DEAD). Check underneath unit, also checked the breaker . Problem was with the breaker. Issue solved. All water lines were dry at the time of service. No leaks detected. No parts used. JOB COMPLETE."
Near Austin, TX 78748
Kevin
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL WRS588FIHZ00 "Arrived on site and inspected refrigerator and found condensation immediately outside of diffusers, took one picture. Inspected gasket’s and sound freezer door gasket is not sitting properly, Took one picture. Will need to bring back a new door to correct issue, add silicon to perimeter of freezer door liner and replace diffuser. No water leaks from connections at time of service.; ordrng 1 LW11037733 (DOOR) and 1 W10605341 (WIRE ASSEMBLY ) and 1 WP482338 (adhesive) and 1 WPW10355585 (gasket-fip)"
Near Austin, TX 78738
Luis
Job Details: 11/08/2018
WINE COOLER WHIRLPOOL WUW55X24DS0 "Arrived on site for no cool. Removed compressor cover found no traces of dye,removed evaporator cover found no traces of dye on evaporator. Removed foil tape around heat exchanger found traces of dye on heat exchanger,called tech support,per tech support heat exchanger is a non serviceable part and is unrepairable. Whirlpool will contact customer 2-5 business daysFile #7723383243"
Near Round Rock, TX 78665
Tyler B.
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL KDTE104ESS1 "Arrived on site for no wash and soap issues. Found unit heavily built with soap residue, found filters and spray arms clogged, ga e customer soap tips and started cleaning parts. Advised customer to keep running hot cycles in unit to clearer remains . No leaks on site"
Near Leander, TX 78641
Jonathan S
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL WDF130PAHB0 Customer needs to be reschedule. Only available Monday or Tuesday.; ordrng 1 SEENOTE (RESCHEDULE FOR MONDAY OR TUESDAY )
Near Hutto, TX 78634
Tyler B.
Job Details: 11/08/2018
WASHER WHIRLPOOL CAE2795FQ0 "Arrived on site for tub rim replacement. R&R rim and tested good, no leaks on site"
Near Spring Branch, TX 78070
Diego G.
Job Details: 11/08/2018
DRYER MAYTAG MEDB725BW0 "Arrived on site. Check for noise issues. Called ASURION TECH LINE and they are recommending replacing motor. ordering motor, blower housing, blower wheel and Pulley. Office to resch ; ordrng 1 8544737 (blower wheel) and 1 8544739 (pulley,blower hous) and 1 W10256512 (housing) and 1 W10448896 (motor-drve)"
Near Spring Branch, TX 78070
Diego G.
Job Details: 11/08/2018
DRYER MAYTAG MEDB725BW0 "Arrived on site. Check for noise issues. Called ASURION TECH LINE and they are recommending replacing motor. ordering motor, blower housing, blower wheel and Pulley. Office to resch ; ordrng 1 8544737 (blower wheel) and 1 8544739 (pulley,blower hous) and 1 W10256512 (housing) and 1 W10448896 (motor-drve)"
Near Spring Branch, TX 78070
Diego G.
Job Details: 11/08/2018
DRYER MAYTAG MEDB725BW0 "Arrived on site. Check for noise issues. Called ASURION TECH LINE and they are recommending replacing motor. ordering motor, blower housing, blower wheel and Pulley. Office to resch ; ordrng 1 8544737 (blower wheel) and 1 8544739 (pulley,blower hous) and 1 W10256512 (housing) and 1 W10448896 (motor-drve)"
Near Georgetown, TX 78628
Tyler B.
Job Details: 11/08/2018
DISHWASHER MAYTAG MDB7749SBM3 Arrived on site for pre diag parts replacement. R&R control and panel. Tested good. No leaks on site
Near Canyon Lake, TX 78133
Diego G.
Job Details: 11/08/2018
WASHER WHIRLPOOL WFW92HEFC0 Arrived on site. Check for dispenser issues. Found detergent not getting flashed into tub. Will need correct dispenser assembly and water valve. Rescheduled for 11/14/18; ordrng 1 W10247306 (valve) and 1 W10862190 (HOUSING ASSY)
Near Canyon Lake, TX 78133
Diego G.
Job Details: 11/08/2018
WASHER WHIRLPOOL WFW92HEFC0 Arrived on site. Check for dispenser issues. Found detergent not getting flashed into tub. Will need correct dispenser assembly and water valve. Rescheduled for 11/14/18; ordrng 1 W10247306 (valve) and 1 W10862190 (HOUSING ASSY)
Near Canyon Lake, TX 78133
Diego G.
Job Details: 11/08/2018
WASHER WHIRLPOOL WFW92HEFC0 Arrived on site. Check for dispenser issues. Found detergent not getting flashed into tub. Will need correct dispenser assembly and water valve. Rescheduled for 11/14/18; ordrng 1 W10247306 (valve) and 1 W10862190 (HOUSING ASSY)
Near Leander, TX 78641
James
Job Details: 11/08/2018
DISHWASHER GE PDT855SSJ0SS Arrived on site and tested operation. Found no function from ui. Inspected control and found to have failed. Installed new control and tested. Found drain pump has also failed and will require replacement. All water connections dry at time of service. Office to schedule return visit as the parts breakdown does not have part numbers; ordrng 1 CNOTE (DRAIN PUMP)
Near Georgetown, TX 78628
Tyler B.
Job Details: 11/08/2018
COOKTOP KITCHENAID KCED606GBL01 "Sr7723386390 arrived on site for unit not sitting flush, found unit raised in front right corner. Tried a number of adjustments to correct but found the burner box warped causing unit to pop up 7/16th of 1" . Burner box not service part . Spoke with TL took demanded pics in quick pics. SR# above"
Near Georgetown, TX 78628
Tyler B.
Job Details: 11/08/2018
REFRIGERATOR KITCHENAID KSCS25FKSS00 Arrived on site for no ice or water despensing. Found harness at freezer door hinge shredded. Advised customer it would need a door to fix. Customer will be replacing unit.
Near New Braunfels, TX 78130
Robert
Job Details: 11/08/2018
REFRIGERATOR MAYTAG MFI2269VEW1 Arrived on job for complaints of refrigerator not running. Found UI not allowing any functionality but keyboard working. Replaced main control and test refrigerator power on and started cooling.
Near , TX 78132
Robert
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL WDF520PADM7 Arrived on job for complaints of upper rack pulling out. Found stoppers not locking in place. Replaced stoppers and test. No leaks detected
Near New Braunfels, TX 78130
Robert
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL WDF130PAHS0 Arrived on job for complaints of not drying. Found water temperature low about 90. Recommended to be at 125. Ran diagnostics and heater working.
Near New Braunfels, TX 78130
Robert
Job Details: 11/08/2018
WASHER MAYTAG MVWC565FW1 Arrived on job for complaints of not spinning. Found lid lock not working. Replaced lid lock and test. Operation normal. Ran calibration and test for leaks. Job complete.
Near Leander, TX 78641
Jonathan S
Job Details: 11/08/2018
OVEN GE JT3500SF2SS "Arrived on site to install previous diagnosed part. Gained access to fuse, removed fuse and installed new. Ran factory reset and tested unit. All tested good."
Near Round Rock, TX 78664
Wesley
Job Details: 11/08/2018
RANGE KITCHENAID KGRT607HBS6 Arrived onsite and determined bake Ignitor to be failing. Ordering bake Ignitor to repair. Also return tech to make sure wiring is secure to panel. F2 e0; ordrng 1 9782065 (igntr-oven)
Near Round Rock, TX 78665
Wesley
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL WRX988SIBM03 Arrived on site and removed ice and heat treated unit gasket to repair gap. Also used silicon to improve seal. All checks good.
Near Canyon Lake, TX 78133
Diego G.
Job Details: 11/08/2018
DRYER WHIRLPOOL MED6000XW0 Arrived on site. Check for no operation issues. Found thermal fuse bad not allowing it to kick on. Being that we just came out and replaced repair kit only charged for part. thermal fuse. No leaks present. Job complete.
Near Canyon Lake, TX 78133
Diego G.
Job Details: 11/08/2018
DRYER WHIRLPOOL MED6000XW0 Arrived on site. Check for no operation issues. Found thermal fuse bad not allowing it to kick on. Being that we just came out and replaced repair kit only charged for part. thermal fuse. No leaks present. Job complete.
Near Canyon Lake, TX 78133
Diego G.
Job Details: 11/08/2018
DRYER WHIRLPOOL MED6000XW0 Arrived on site. Check for no operation issues. Found thermal fuse bad not allowing it to kick on. Being that we just came out and replaced repair kit only charged for part. thermal fuse. No leaks present. Job complete.
Near San Marcos, TX 78666
Robert
Job Details: 11/08/2018
RANGE WHIRLPOOL WFC150M0EW1 Arrived on job for complaints of light not working. Customer has changed bulb 3 times using correct bulb. Changed sock.
Near Leander, TX 78641
Jonathan S
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL KDTE404DSS0 "Arrived on site for dishwasher leaking. Removed outer door panel and kick plate. Performed diagnostics mode and monitor cycle. Found water leaking from vent. Removed vent and installed new. Found found buildup between water funnel and door. Removed food buildup. Per diagnostics mode and motor cycle. All tested good, no water leaks present at time of completed service. Spoke with customer on cleaning cycle."
Near Leander, TX 78641
Jonathan S
Job Details: 11/08/2018
DRYER WHIRLPOOL WED4815EW1 Arrived on site for dryer starting but not tumbling. Gained access to pulley and belt and found broken belt. Installed new belt and tested unit. All tested good. Spoke with customer on user care guide.
Near San Marcos, TX 78666
Robert
Job Details: 11/08/2018
RANGE WHIRLPOOL RF3020XGW0 Arrived on job for complaints of burner light on and burner hot if oven on. Burner switch shorted keeping light on. Heat of burner from oven vent. ; ordrng 2 WP3148953 (switch-inf)s and 2 WP3149404 (switch-inf)s
Near Leander, TX 78641
Jonathan S
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL WRF555SDFZ07 "Arrived on site for refrigerator freezing items in RC. Performed diagnostics mode and tested fresh food thermistor and damper door. Found air escaping with control damper closed. Removed ice maker assembly and gasket folded over and not allowing damper to close completely. Adjusted gasket and tested damper control. Tested good. Spoke with customer on air flow and operation. All tested good, no water leaks present."
Near Austin, TX 78747
Kevin
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL WRS325FDAW04 Arrived on site and inspected refrigerator and found the lights are on but it is not cooling and no fans are running. Replaced defrost control and there is still no function replaced thermostat and it will now run properly. Recommended to customer refrigerator be allowed to cool for at least 12 hours before food please put in it. No water leaks connections at time of service.
Near Horseshoe Bay, TX 78657
Thomas L.
Job Details: 11/08/2018
REFRIGERATOR KITCHENAID KRSF505ESS00 Arrived on site for no cool in either section. Tested unit in step 4 twice and the 3 way valve is not working properly. ; ordrng 1 3HOURSEALEDSYSTEM and 1 W10779331 (compressor) and 1 W11159142 (VALVE)
Near Horseshoe Bay, TX 78657
Thomas L.
Job Details: 11/08/2018
RANGE AMANA AKT3040E Arrived on site to replace left rear burner. The wrong burner was ordered. The right front burner was ordered. ; ordrng 1 WP32082801 (elmnt-surf) and 1 WP74011243 (switch- in)
Near Marble Falls, TX 78654
Thomas L.
Job Details: 11/08/2018
WASHER GE GFWH1200H0WW Arrived on site and replaced user Interface. The unit is supposed to power up and go into a mode to select the washer model. The new control would not power up and do that. All connections were correct. Unit will need another user interface. 2 man job. Office to reschedule; ordrng 1 2MANJOB (DRYER ON TOP OF WASHER. ) and 1 WH12X20814 (UI BOARD)
Near Round Rock, TX 78664
Wesley
Job Details: 11/08/2018
WASHER MAYTAG MVWC415EW1 Arrived on site and determined control to be failed and not sending any voltage to drain pump motor.
Near Leander, TX 78641
James
Job Details: 11/08/2018
RANGE KITCHENAID KGCU467VSS02 Arrived on site and tested operation. Found all flames to be blue and working properly. Customer stated that the unit had really small orange flames for about a week then the flames began working properly again. Found unit to be working properly at time of service and no issue found. Job complete
Near Leander, TX 78641
James
Job Details: 11/08/2018
MICROWAVE WHIRLPOOL WMH32519HZ3 Arrived on site and installed new wrapper and door. Tested for proper operation and found unit working properly. Job complete
Near Cedar Park, TX 78613
Lou
Job Details: 11/08/2018
WASHER WHIRLPOOL WTW4816FW2 "arrived on site to inspect washer not spinning. Upon further inspection, I placed the unit in diagnostics and the unit showed error codes F7E5 and F5E1. I cleared the codes and continued with testing. Found that the lid switch was not locking, but the unit continued testing and it operated as designed. I removed the console and removed the J6 connector and using my multimeter I tested the J6-2 to J6-3 for continuity and read it open. I am ordering a lid switch assembly and will return with all prescreened parts. I schedule return service for 11/13/18. No water leaks observed during service. I left a brochure on the countertop for the tenant and wrote do not use the unit until repaired.; ordrng 1 W10838613 (lid lock assembly)"
Near Round Rock, TX 78664
Wesley
Job Details: 11/08/2018
WASHER WHIRLPOOL WTW5000DW1 7723384371 spoke with JK. Documented that unit has no error codes and is functioning as designed and customer is completely dissatisfied with unit operation.
Near Wimberley, TX 78676
Diego G.
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL KFIS29PBMS03 Arrived on site. Replaced Deli control and harness. Positioned thermistor in correct spot an added silver tape. All functions tested OK. No leaks present. Job complete
Near Wimberley, TX 78676
Diego G.
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL KFIS29PBMS03 Arrived on site. Replaced Deli control and harness. Positioned thermistor in correct spot an added silver tape. All functions tested OK. No leaks present. Job complete
Near Wimberley, TX 78676
Diego G.
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL KFIS29PBMS03 Arrived on site. Replaced Deli control and harness. Positioned thermistor in correct spot an added silver tape. All functions tested OK. No leaks present. Job complete
Near Austin, TX 78727
Wesley
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL GI6SDRXXB06 Arrived on site and completed repair. Installed drain tube. Unit is now operating as designed.
Near Austin, TX 78703
Scott
Job Details: 11/08/2018
VENTHOOD KITCHENAID KXW4336YSS0 "Arrived on site for noisy blower . Found fan is making a horrible vibrating and clanging noise . Will need to order blower motor . Please call to set return visit .; ordrng 1 WPW10291602 (motor-fan)"
Near Austin, TX 78702
Scott
Job Details: 11/08/2018
RANGE WHIRLPOOL WGG555S0BS01 Arrived on site for right front burner not working . Found valve will not turn and knob is broken . Will for sure need knob and valve . Returning with switch harness in case needed . No gas leaks detected at time of service . Return 11/12 . ; ordrng 1 WPW10206288 (valve-brnr) and 1 WPW10506367 (knob)
Near Pflugerville, TX 78660
Wesley
Job Details: 11/08/2018
DRYER MAYTAG MGD9600SQ0 Arrived on site and repaired dryer with coil valves. Charged 189.99 for labor and 32.04 for part. Unit is now heating and drying. Good airflow.
Near Wimberley, TX 78676
Brandon
Job Details: 11/08/2018
DISHWASHER KITCHENAID KUDS24SEBS1 "Arrived on site for customer complaint of soap dispenser being broken, I replaced soap dispenser, unit tested good."
Near Pflugerville, TX 78660
Wesley
Job Details: 11/08/2018
OVEN WHIRLPOOL WOD51EC0AS05 "Arrived on site and found control bad due to power outage surge.
Near Leander, TX 78641
James
Job Details: 11/08/2018
REFRIGERATOR WHIRLPOOL WRF767SDEM01 "Arrived on site and installed new ice box fan, evap fan and control. Plugged unit in to test and found all working properly. Customer has unit unplugged and in garage. Job complete"
Near Austin, TX 78753
Joseph C.
Job Details: 11/08/2018
RANGE WHIRLPOOL WFE530C0ES1 Arrived on site for “oven temps too high” complaint. Inspected unit and found sensor out of range. Removed and replaced sensor. Tested unit. Unit is performing as designed.
Near Georgetown, TX 78633
Jerry C.
Job Details: 11/08/2018
OVEN KITCHENAID KODE300ESS02 "KODE300ESS02 Arrived to inspect temperature issues. The customer had an inspector tell them the temperature of their oven was incorrect. I measured internal temperature at a bake setting of 350 and it claimed preheat at 358 degrees with a climb out to 370. 227, 367, 229 and 368. I advised the customer the unit was heating as designed. The door was not fully seated into the mount and required repair. The door worked as designed after the correction. Operational test good."
Near Round Rock, TX 78664
Jerry C.
Job Details: 11/08/2018
REFRIGERATOR GE DTS18ICRDRWW "DTS18ICRDRWW Arrived to inspect cooling issue. The unit was running upon arrival and when asked, the customer said it runs most of the time. Fc temperature was 12 and rc was 42. The compressor was quite hot and all tubing was hot on the high side, but cooling was noted on the return from the condenser. The compressor drew .9 and should have been pulling 1.2-1.5 with internal and high side temperatures as they were. I suspect a failing compressor. Office to authorize and order compressor, dye drier and service port. Please allow 2 hours for sealed system service. The rc and fc cabinet openings will require gap sealing upon return. No leaks observed during service. ; ordrng 1 CNOTES (SEALED SYSTEM SERVICE 2 HOURS) and 1 SF8404 (SERVICE PORT) and 1 WPW10143759 (dryer) and 1 WR87X10224 (compressor kit egys6)"
Near Round Rock, TX 78665
Jerry C.
Job Details: 11/08/2018
MICROWAVE GE JVM3160RF2SS "JVM3160RF2SS Arrived to inspect heating and power issues. I discussed the failure with the customer and found it actually occurs during heating. The customer had the breaker and wiring within the home corrected and the issue persisted. Due to it occurring during heating operations, the magnetron, capacitor and diode will require replacement. As a precaution, the transformer should be available to the returning technician and well. Office to authorize the mag, cap, fuse and diode, and all three door switches for return service. Office to schedule return service with the customer after authorization is obtained.; ordrng 1 CNOTES (AUTHORIZATION REQUIRED) and 1 WB20X10067 (h.v.transformer) and 1 WB27X10849 (hvdiode) and 1 WB27X11138 (fuse) and 1 WB27X11211 (magnetron) and 1 WB27X11214 (h.v.capacitor)"
Near Pflugerville, TX 78660
Wesley
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL WDT750SAHZ Arrived on site and found wire shorted at the power block. Repaired wiring and restored functionality. All checks good. No leaks.
Near Manor, TX 78653
Joseph C.
Job Details: 11/08/2018
OVEN WHIRLPOOL SF315PEPB1 "Arrived on site for “gas smell” complaint. Inspected unit and found burner bar loose. Refitted bar. Tested unit. Unit is performing as designed. No leaks detected, at time of service."
Near Temple, TX 76502
Al
Job Details: 11/08/2018
DISHWASHER WHIRLPOOL WDT790SLYM1 Arrived to inspect the top rack that fell off inside the dishwasher. Verified the issue and will order W10712395-ADJUSTER and reschedule customer. All water lines were dry at the time of service. ; ordrng 1 W10712395 (ADJUSTER)
Near Austin, TX 78732
Cliff
Job Details: 11/08/2018
DISHWASHER KITCHENAID KDTE404DSS0 Arrived on site to diagnose a dishwasher that is not dispensing rinse agent. Found rinse agent dispenser dial pushed past low setting causing no dispensing of detergent. Reset dial to proper position and tested unit. Found all is functioning properly at this time. Also customer concern about dimly lit light on the control panel. Panel is fully functional and light is not affecting function of unit. No repairs can be done through extended warranty as it is not a functional failure. Job is complete.