Near Hutto, TX 78634
Andy
Job Details:
12/30/2020
MICROWAVE WHIRLPOOL WMH78019HZ3
Arrived on site to install previously
Near Austin, TX 78746
Luis
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRF540CWHB01
"Arrived on site for noise complaint. Found noise when condenser fan runs,found harness in compressor compartment obstructing fan blade,adjusted condenser fan housing,rerouted harness assembly noise no longer present"
Near Pflugerville, TX 78660
David S
Job Details:
12/30/2020
REFRIGERATOR KITCHENAID KRMF706ESS01
Arrived on site for dispenser not working. I inspected the unit and work area. I found the dispenser motor siezed. I found good voltage to the motor when called for. I replaced the dispenser motor. I tested the unit and it is now working as designed. Job complete.
Near Austin, TX 78748
Kevin
Job Details:
12/30/2020
RANGE WHIRLPOOL WFG505M0BS3
"Arrived on site and sound customer is experiencing glass on door hot to the touch. Per service pointer W10917778 added insulation to the inside of the glass door panel. This should help lower the external temperature of the glass. Range is otherwise operating normally, job complete"
Near Austin, TX 78738
Luis
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRS588FIHV00
"Arrived on site for defective icemaker. Removed defective icemaker installed a new icemaker ran diagnostics harvest test passed,ran fill test passed."
Near Austin, TX 78748
Richard
Job Details:
12/30/2020
MICROWAVE WHIRLPOOL WMH31017HS6
"Arrived onsite for the microwave not heating. During testing found that error code F1E4. Replaced control board and it did not resolve the issue. Replaced upper interlock switches and it did not resolve the issue. Will need to reorder control board , upper interlock, lower interlock, main harness. Office to schedule ; ordrng 1 W10892389 (Control) and 1 W11433682 (Upper interlock) and 1 W11433683 (Lower interlock) and 1 W11350914 (Harness)"
Near Spicewood, TX 78669
Brandon
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL WDF520PADM7
Arrived on site for customer complaint of unit not cleaning dishes and not dispensing soap. Found unit was clogged with hard water and soap scum from u it never being cleaned. Instructed customer to replace spray arms and clean 2-3 times with dishwasher magic.
Near Cedar Park, TX 78613
Wesley
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRX986SIHZ02
Arrived onsite and found unit drawer broken. Replaced upper freezer bin. Unit is now operating as designed.
Near Austin, TX 78752
Matthew
Job Details:
12/30/2020
WASHER WHIRLPOOL WFW560CHW0
Arrived onsite for washer vibrating or off balance. Upon arrival put unit in diagnostics. Found F0E5 unbalanced load. Cleared code and ran auto cycle. All test passed. Ran spin test only and passed. Instructed customer on proper loading and cycle selection to avoid unbalanced load and noise.
Near Leander, TX 78641
Justin
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL KDFE104HPS1
Arrived on site for dishwasher not drying dishes. Put unit into diagnostics mode and found no stored error codes. Put unit into test cycle and monitored amp draw from heater. Heater held correct amp draw. Found unit working as designed. Found customer had not been using rinse aid and I advised them on proper usage. Call complete.
Near Austin, TX 78745
Richard
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL WDTA50SAHZ0
Arrived onsite for the dishwasher not draining. During testing found that the drain pump was not working properly. Replaced drain pump and adjusted drain hose and dishwasher washer tested good and no leaks detected complete
Near Dripping Springs, TX 78620
Robert
Job Details:
12/30/2020
ICE MACHINE WHIRLPOOL KUIX505ESS1
Arrived on job for complaints of not making ice. Ran diagnostics and found compressor running but no frost pattern. Will need SS repair. ; ordrng 1 WP2313624 (condenser) and 1 WPW10200037 (drier-tube) and 1 WPW10218037 (evaporator) and 1 WPW10605286 (compressor)
Near Austin, TX 78731
Kevin
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL KFCS22EVMS8
"Arrived on site and replaced icemaker diagnosed on previous visit, after replacement icemaker immediately began cycling and filled with water. job complete"
Near Cedar Park, TX 78613
David S
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRT108FZDM05
"Arrived on site for sealed system. I inspected the unit and work area. I found the unit with no refrigerant in it. I installed a new compressor, Uv dryer and access valve. I put a sweep charge into the system and found no leaks. I evacuated the system and pulled a vacuum. I a measured charge into the system. I ran the unit for 10 minuets and found the evaporator forming a good frost pattern. The unit is operating as designed.; ordrng 2 W10891057 (coupler (LOKRING REPLENISHMENT))s"
Near Briarcliff, TX 78669
Brandon
Job Details:
12/30/2020
WASHER WHIRLPOOL WTW6120HC0
"Arrived on site for customer complaint of unit not starting a cycle, no error codes in diagnostics mode, however every function worked in component test, fill, agitate, spin. Ran diagnostics test cycle, found unit would not respond. Ordering main control. ; ordrng 1 W11498804 (Control) and 1 Cnote (Office to reschedule)"
Near Leander, TX 78641
Lou
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL WDF520PADM7
"Arrived on site to inspect dishwasher spray arms not working. Upon further inspection, I placed the unit in diagnostics showing error code F4E3-motor failure. Cleared the code and continued with testing and the unit dispensed water into the tub and the motor failed to come on (F4E3). Advanced through testing and the dispenser, drain pump, and element all operated as designed. I removed and replaced the sump/motor assembly and tested. Unit is operating as designed. No water leaks observed during service, job completed."
Near Briarcliff, TX 78669
Brandon
Job Details:
12/30/2020
DISHWASHER KITCHENAID KDTM704KPS0
"Arrived on site for customer complaint of unit not powering on, found power supply not properly hooked up, I attached power supply, unit tested good."
Near Georgetown, TX 78633
Paul
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL WDT720PADM2
Arrived onsite for a dishwasher to replace previous diagnosed parts. I replaced the sump and motor. I tested the unit and found it working as designed. Call complete.
Near Driftwood, TX 78619
Robert
Job Details:
12/30/2020
WASHER MAYTAG MHW8000AW0
Arrived on job for complaints of error code. Ran diagnostics and found error code for slow drain. Cleared pump and test.
Near Buda, TX 78610
Richard
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL MDB9959SKZ
Arrived onsite for the dishwasher not draining. During testing found that there was debris stuck inside the drain pump housing causing the drain pump the bind up. Removed debris and replaced drain pump and dishwasher tested good and no leaks. Complete
Near Austin, TX 78733
Kevin
Job Details:
12/30/2020
DRYER WHIRLPOOL WED49STBW1
"Arrived on site and inspected dryer and found element has failed, prescreened element did not arrive and it will need to be re-ordered. ; ordrng 1 279838 (Heating element)"
Near Pflugerville, TX 78660
Wesley
Job Details:
12/30/2020
REFRIGERATOR KITCHENAID KRFF507HPS00
Arrived onsite and found unit freezer module shorted. Ordering module to repair. Advised customer on repair. ; ordrng 1 W10695459 (module)
Near Jarrell, TX 76537
Paul
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRX988SIBM03
Arrived onsite for fridge with ice maker and power issues. Tested unit and found UI failing. Units ice issue was due to UI failure turning off the cooling and having the ice form together and then breaking away once being dispensed. Installed parts unit working as designed. Job complete.
Near Austin, TX 78723
Matthew
Job Details:
12/30/2020
OVEN IKEA IBS550DS00
"Arrived onsite for oven not powering on. Upon inspection found thermal fuse failed. Replaced fuse, tested unit to 350 degrees and unit is functioning properly.
Near Austin, TX 78759
David Z
Job Details:
12/30/2020
OVEN KITCHENAID KEMS378SSS00
"Arrived on site to install previously diagnosed parts to resolve minimal heat. Opened door and found broil element was sagging in the outer coil and it wasnÂ’t heating. Tested element and temp sensor and both were showing open. Talked to SW and was able to verify the preheat and bake cycle alternates between inner and outer broil and bake element. Without broil element working a heat source is missing from the cycle. OhmÂ’d out bake element and found it within spec. Ordering new temp sensor. ; ordrng 1 WPW10131825 (sensor)"
Near Georgetown, TX 78628
Lou
Job Details:
12/30/2020
REFRIGERATOR KITCHENAID KRFC704FBS01
"Arrived on site to install previously diagnosed and ordered part. Due to the ice maker failure, I removed and replaced the ice maker and tested. Cycled power to the unit to reset controls and unit is operating as designed. While on site, I found the right RC door gasket torn. I am ordering the gasket and scheduled return service. No water leaks observed during service.; ordrng 1 W10917312 (gasket- BLACK)"
Near Hutto, TX 78634
Andy
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRF990SLAM02
Arrived on site to install previously diagnosed parts. Removed failed parts and replaced with new. Tested unit and all operations are normal. No water leaks present at time of service.
Near Austin, TX 78757
Matthew
Job Details:
12/30/2020
REFRIGERATOR KITCHENAID KSF26C7XYY04
"Arrived onsite for refrigerator not cooling. Upon inspection found that unit appears to be leaking coolant at RC evaporator. Lines leading into cabinet are completely corroded. Called tech line for assistance and recommended Nitrogen test (SR7729619611) to confirm internal or external leak. ; ordrng 1 NITROGEN (NITROGEN )"
Near Cedar Park, TX 78613
Justin
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WSR57R18DM02
Arrived on site to install previously diagnosed parts. Gained access to evap thermistor and tested. Thermistor read way out of range. Tested harness and harness tested good. Installed new thermistor. Advised customer it may take 24-48 hours to get back to normal temperatures. Call complete.
Near Liberty Hill, TX 78642
Kayman
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL WDF760SADM0
Arrived onsite for dishwasher leaking. Upon inspection I found the unit would intermittently leak from the bottom left corner. I found the spray arm not spinning and shooting water to the left corner of the reservoir which allows water to overflow. The motor sounds weak or not pumping at full capacity. I recommended replacing the main control and wash motor assembly.
Near Leander, TX 78641
Lou
Job Details:
12/30/2020
OVEN KITCHENAID KODE900HSS00
"Arrived on site to install previously diagnosed and ordered part. Per previous techs diagnosis, they recommended replacing the upper blower motor assembly. Customer advised that they were using the lower oven when the error code F8E0 appeared. I tested both blowers in diagnostics and found the lower blower was not showing correct RPMÂ’s. I removed and replaced the lower blower and retested and it is operating as designed. I devised the customer of my findings and repairs. Job completed."
Near Austin, TX 78744
Luis
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRX735SDHZ03
"Arrived on site for freezing in fresh food. Checked damper operation good,added sealer between liner and damper seal to prevent cold air from migrating into fresh food with damper door closed,adjusted temperature setting."
Near Bertram, TX 78605
Cliff
Job Details:
12/30/2020
RANGE HOTPOINT RGB628ET1WH
Arrived on site to replace thermostat for range. Found thermostat is good in unit and igniter receiving power but igniter non-operational. Igniter will need to be replaced to complete repairs. .; ordrng 1 WB2X9154 (IGNITOR )
Near Leander, TX 78641
Lou
Job Details:
12/30/2020
MICROWAVE WHIRLPOOL WOC54EC0HS03
"Arrived on site to install previously diagnosed and ordered parts. Due to the main control and console failures, I removed and replaced the main control and console, cycled power in between replacements and tested unit. Unit is operating as designed. Job completed. I provided the customer with the new SAID number, along with the Whirlpool WiFi connect team number if they needed assistance with connecting the WiFi to the unit."
Near Austin, TX 78726
David Z
Job Details:
12/30/2020
COOKTOP JENN-AIR JGD3430BS00
Near Pflugerville, TX 78660
David S
Job Details:
12/30/2020
OVEN WHIRLPOOL WOD51EC0HS01
Arrived on site to install previous diagnose part. I inspected the unit and work area. I found the cabinet not built properly. There is a hole cut into the bottom shelf for the wall oven. According to whirlpools installation instructions is is supposed to be a solid shelf to allow for proper air flow. I replaced the console and tested the unit. It is now working as designed. Job complete.
Near Austin, TX 78732
Brandon
Job Details:
12/30/2020
WASHER WHIRLPOOL MVWB835DW4
"Arrived on site for customer complaint unit making loud noise, found oil on floor, failed gearcase, and basket stripped. ; ordrng 1 W11455453 (Gearcase) and 1 W10811960 (Basket) and 1 Cnote (Office to reschedule)"
Near Liberty Hill, TX 78642
Cliff
Job Details:
12/30/2020
DRYER MAYTAG MEDB835DW4
Arrived on site to diagnose a dryer that is making unusual noise. Tested all parts and components and found no failures with the dryer at this time. Drum may not have been aligned with rollers after previous service. Parts have found proper alignment during normal usage and no further repairs are needed at this time.
Near Hutto, TX 78634
Andy
Job Details:
12/30/2020
DRYER FRIGIDAIRE FASE7073NA2
Arrived on site for dryer error code. Tested and inspected unit and found failed heating element. Removed failed part and replaced with new. Tested unit and all operations are normal. No other repairs are needed at this time.
Near Austin, TX 78729
David Z
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL KDFE104HBL0
"Arrived on site to follow up on DW that is running super long cycles when using delay wash. Customer informed me they would set to 2 hour delay and come back 8+ hours later, and unit is running still. Talked to TJ at tech line SR7729614438. He informed yea that only part that controls this is the main control, but there are several factors that will increase that cycle time. First is that the OWI takes 2+ hours to calibrate and will increase cycle time. With delay wash unit will also fill with cold water and take an extended period of time to heat the water. Customer is going to run during the day and make sure the cycle finishes. Advised if the cycles finish then the unit is considered working as designed and there are no other parts to replace. Tech line said if there is no OWI code then itÂ’s working as designed. Found no OWI codes. Call complete."
Near Round Rock, TX 78664
David S
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRS588FIHZ00
Arrived on site for fridge making a noise. I inspected the unit and work area. I found the compressor making a buzzing noise. I inspected the compressor and found it not mounted properly. I corrected the compressor position. I tested the compressor and found it not making a buzzing noise anymore. Job complete.
Near Leander, TX 78641
Lou
Job Details:
12/30/2020
RANGE WHIRLPOOL WFC315S0JS0
"Arrived on site to inspect range error code. Upon further inspection, I found the unit display showing error code F3E0. Placed the unit in diagnostics and checked the temp reading and found it to be blank. Checked resistance to the oven sensor and found 1082 ohms which is within range. Checked continuity to the harness and it was good. I removed and replaced the main control and retested and unit is operating as designed. Job completed. Apartment vacant."
Near Austin, TX 78745
Luis
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRQA59CNKZ
"Arrived on site for no cool. Compressor and fans running,removed evaporator cover,no frost formation on evaporator can hear some refrigerant passing through called tech support per tech support information being sent to product review team
Near Austin, TX 78734
Brandon
Job Details:
12/30/2020
MICROWAVE KITCHENAID KOCE500ESS11
"Arrived on site for customer complaint of unit not heating in oven, found power supply issue, instructed customer to have electrician out."
Near New Braunfels, TX 78130
Noah D
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRS315SDHM02
"Arrived on site to inspect fridge for not producing ice, upon inspection found the motor stopped mid cycle, forced harvest and found no issues, ordering Icemaker due to intermittent issue. Office to reschedule ; ordrng 1 W10300022 (ICEMAKER )"
Near Kyle, TX 78640
Robert
Job Details:
12/30/2020
RANGE AMANA ACR4303MFB4
"Arrived on job for complaints of burners not working properly. Test operation of new burners, working properly now will need one more small and big burner.; ordrng 1 W11396790 (ELEMENT ) and 1 W11396792 (ELEMENT )"
Near Austin, TX 78702
Jacob
Job Details:
12/30/2020
OVEN KITCHENAID KSGG700ESS1
Arrived onsite for number 3 button on key pad barely working. Tested unit. Number 3 button barely gave any feed back. Tried to reset from breaker panel. Still had same issue. Ordered part. Office to reschedule ; ordrng 1 W10901124 (panl-cntrl)
Near Troy, TX 76579
Jonathan M
Job Details:
12/30/2020
WASHER WHIRLPOOL WTW7120HW0
"Arrived on site for a washer that is leaking on the bulky or towel cycles. Inspected unit and work area. Customer advised that the unit is not leaking on any other cycles. Placed unit in-service diagnostics and found no stored error codes. Tested individual components and found several not functioning. I called Techline and spoke to Andrew SR# 7729614014. He had me ask the customer when the unit starts to leak. The customer advised it was towards the end but definitely not during the wash cycle. He advised that being this happened only on bulky loads, he issue would be with the tub ring letting water out when spinning larger loads. He advised to replace the tub ring to get in new seals. Ordering part and office will need to contact customer for reschedule date due to psp item. ; ordrng 1 W11094304 (TUB RING )"
Near Hewitt, TX 76643
Jonathan M
Job Details:
12/30/2020
DISHWASHER MAYTAG KDTM354ESS1
Arrived on site for a dishwasher that has a torn control board. Inspected unit and work area. Found the right side portion of the control panel broken off. Customer advised that thereÂ’s no issues with the dishwasher other than the control panel being slightly broken. Ran unit through an auto test and the unit worked as designed. Submitted photos to review and was advised this is a cosmetic issue only and would not be covered. Advise customer of decision and customer advised he would try to glue it back on. Unit is working as designed. Call complete.
Near Austin, TX 78748
Richard
Job Details:
12/30/2020
WASHER WHIRLPOOL WTW8040DW4
Arrived onsite for the washer has coins caught between the agitator. During inspection found that there are coins caught in between the agitator.
Near Killeen, TX 76542
Al
Job Details:
12/30/2020
RANGE WHIRLPOOL WGE745C0FS01
Arrived to inspect front right burner not working.Confirmed the complaint and found the infinite switch is defective.Order WPW10312185 and will return with the element.Office to reschedule the customer for return service due to parts availability.Needs more work.; ordrng 1 WPW10312185 (switch-inf (FRONT RIGHT))
Near Temple, TX 76502
Tyler
Job Details:
12/30/2020
RANGE ESTATE TES356TD0
Arrived on site for Range they had a glass door that broke up on arrival customer described that they found when they went to open the door after the oven was preheating that the trim on the side of the door seemed a little loose and the moment they open the door the glass fell right out of the door upon further inspection of the unit I was able to verify that due to the age of the range and the trim piece that broke the heat overtime had worn it down causing it to break and allowing the glass be damaged. Then go to authorization to replace the glass door as well as the two trim pieces on the left and right side of the door after making the repair I was able to verify that the door is now functioning as designed when it opens and shuts and none of the parts of loose. call complete
Near Little River-Academy, TX 76554
Paul
Job Details:
12/30/2020
DRYER GE DCVH680EJ1WW
"Arrived onsite to replace previous diagnosed parts. Replaced all four slides, belt, felt, and bearing. Tested prior to leaving, unit working to manufacture specs. Call complete."
Near Lakeway, TX 78734
Brandon
Job Details:
12/30/2020
WASHER WHIRLPOOL WFW5620HW0
"Arrived on site for customer complaint of unit making noise during high spin, found unit worked as designed but a little loud during spin.
Near Leander, TX 78641
Kayman
Job Details:
12/30/2020
RANGE WHIRLPOOL WFG505M0BS3
Arrived onsite for range with light socket not working. Upon inspection I found the bulb had broken and the base was left in the socket.
Near Waco, TX 76705
Jonathan M
Job Details:
12/30/2020
RANGE WHIRLPOOL WFE535S0JZ0
Arrived on site to install previously diagnosed parts. Inspected unit and work area. Replaced terminal block and wire harness and tested unit. Unit is now working as designed. Call complete.
Near Salado, TX 76571
Paul
Job Details:
12/30/2020
RANGE SAMSUNG FTQ3531WUX/XAA
"Arrived onsite for range large burners staying on high not cycling. Tested unit found infinite switches faulty. Replaced switches and tested unit, unit working as designed. Call complete."
Near Austin, TX 78759
Wesley
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL WDF330PAHS2
Arrived onsite and found unit tub under hyper tension from tight feet. Adjusted to relieve tension and eliminate break in seal on left side. Also adjusted door gasket position. Unit has now stopped leaking from left side while washing.
Near Leander, TX 78641
Justin
Job Details:
12/30/2020
COOKTOP WHIRLPOOL KCGC506JSS00
Arrived on site for cooktop with back right two burners not igniting. Upon further inspection I found plastic wrap from factory still on orifice and orifices needing to be tightened. Tightened orifices and tested u it. Unit now working as designed. Call complete.
Near Belton, TX 76513
Tyler
Job Details:
12/30/2020
REFRIGERATOR GE GFSS6KKYESS
Arrived on site for refrigerator meeting previously diagnosed sealed system equipment. On arrival found that previously diagnosed system issue was still a problem and then proceeded to make the needed repairs with the compressor UV dryer and coupler. After pulling a vacuum I was able to verify that the low side was sitting at -30 psi and held it for 10 minutes without any issues or signs of a leak unfortunately the UV dryer we were sent out with did not have an access valve on it so I could not verify any readings on that side but I was able to charge up the system on the low side and after filling the unit to 4.6 ounces as recommended then reassembled the unit and was able to verify after 20 minutes the unit was definitely cooling down as needed and inform the customer will take 24 hours for the temps to stop fluctuating and become stable and another 24 hours after that for the icemaker to fully fill the bucket up with ice. Call complete
Near Austin, TX 78703
Jacob
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL KDTE204EPA4
Arrived onsite for top drawer sliding out on itÂ’s own. Looked at rack. It wasnÂ’t rolling too much on its own. Called Tech line. Suggested to level the unit up more from the front feet. Said that the rack will fall some towards the front as the rack comes out. Said for customer to load any heavy dishes towards the back of the rack to help with the rack rolling out. No leaks at this time. Job complete. Got Sr#7729619248
Near Hewitt, TX 76643
Jonathan M
Job Details:
12/30/2020
WASHER WHIRLPOOL NFW5800HW0
Arrived on site for a washing machine that has a broken latch. Inspected unit and work area. Customer advised that the unit wonÂ’t remain out of the lock state. Attempted to power cycle unit and found the door still would not open. Manually unlocked the latch and replaced latch. Tested unit and unit is working as designed. Call complete.
Near Belton, TX 76513
Tyler
Job Details:
12/30/2020
REFRIGERATOR KITCHENAID KRFF507ESS01
Arrived on site for refrigerator not allowing the freezer door to open and frost building up according to the customer upon arrival. Upon further inspection of the unit I found that the frost on the door was being created because it was a clogged drain line in the freezer not allowing the door to open and shut properly causing hot air to get in.clearing out the drain line and getting rid of the ice in order to help the door shut after customers approval I made the repair and they were verified as a door nail seals as designed it will no longer have any icing issue. Call complete
Near Hutto, TX 78634
Andy
Job Details:
12/30/2020
WASHER WHIRLPOOL MVW7230HW0
Arrived on site for washer strike broken. Removed failed part and replaced with new. Tested unit and all operations are normal. No water leaks present at time of service.
Near Robinson, TX 76706
Jonathan M
Job Details:
12/30/2020
REFRIGERATOR KITCHENAID KFIS29PBMS00
"Arrived on site for a refrigerator thatÂ’s not cooling. Inspected unit and work area. Customer had unit unplugged for the past two weeks so both sections were room temperature. I plugged in the unit and found the unit cooling had been set to off. I asked the customer if they had potentially turned it off by mistake. Customer advised that they may have accidentally but they canÂ’t be sure as they have two other people in the home. Turned unit cooling on and the compressor kicked on. Both condenser fan and evaporator fans were running. Could not take amp draw off of compressor due to inverter. Found unit cooling and advise customer that due to the unit being unplugged and at room temperature, we would not be able to detect any potential defrost issues.
Near Salado, TX 76571
Paul
Job Details:
12/30/2020
REFRIGERATOR KITCHENAID KFIS25XVMS1
"Arrived onsite to replace previous diagnosed parts. Replaced start device and capacitor. Tested unit, unit working as designed.
Near Lorena, TX 76655
Jonathan M
Job Details:
12/30/2020
MICROWAVE JENN-AIR JMC2430DP01
Arrived on site for a microwave thatÂ’s intermittently turning itself on by itself and is making noises. Inspected unit and work area. Customer advised that there is a error message that comes on when keypads are touched. Customer showed me the issue and the unit is flashing an F2 E1 (stuck or shorted key). Unit will need control panel for repair. Ordering part in office will need to contact customer about reschedule date due to out of stock and PSP item.; ordrng 1 W11229663 (panl-cntrl)
Near Copperas Cove, TX 76522
Al
Job Details:
12/30/2020
DISHWASHER KITCHENAID KDTM404KPS0
"Arrived to install previously ordered part.Removed, replaced and unit tested as designed.Job completed."
Near New Braunfels, TX 78130
Andrew
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRS315SDHZ05
"Arrived on site to test unit for not closing properly. Replaced thimble, tested unit, unit works good. Customer was satisfied with improvement. Job complete."
Near Cedar Park, TX 78613
David S
Job Details:
12/30/2020
MICROWAVE GE JE1590SH02
Arrived on site to install previous diagnose part. I gained access to the magnetron and installed new. I reassembled the unit and tested it. I found it heating and working as designed.
Near Georgetown, TX 78626
Tommy
Job Details:
12/30/2020
OVEN WHIRLPOOL RBD307PVS00
Arrived onsite for previously diagnosed parts. Put control back into unit and tested. Unit is now operating as designed. Job Completed.
Near Copperas Cove, TX 76522
Al
Job Details:
12/30/2020
RANGE WHIRLPOOL WFC150M0JB0
Arrived to inspect range coils not functioning properly according to customer.Tested all burners and al burners were fully operational.No parts needed. Unit cycles on an off properly Job completed
Near Killeen, TX 76549
Al
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRF757SDHZ00
"Arrived to inspect freezer module not working causing the interior ff lights not to work.Confirmed the complaint and removed and replaced it and unit tested as designed..W11224590; ordrng 1 AUTHORIZATION (FOR UI, P&L ) and 1 W11224590 (cntrl-elec)"
Near San Marcos, TX 78666
Andrew
Job Details:
12/30/2020
COOKTOP WHIRLPOOL WCG55US6HS00
"Arrived on site to test unit for left front burner flames are really low. Found orifice had a small clog. Removed orifice and cleared. Replaced orifice, tested unit, unit works good. Adjusted flame to customer preference. No leaks detected. Job complete."
Near Waco, TX 76712
Jonathan M
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRS950SIAM00
"Arrived on site for fridge raider thatÂ’s not dispensing water or making ice. Inspected unit and work area. Tested the water dispenser and found the inlet water valve trying to pull in water for not being able to. Removed the filter and tested the unit again found unit working as designed. Advised customer that this issue was due due to a faulty filter. The customer explained that they have tried two different filters and neither of them have worked. Customer showed me both filters that they used and I advise the customer their issue was due to replacement part filters.
Near Seguin, TX 78155
Noah D
Job Details:
12/30/2020
DISHWASHER WHIRLPOOL WDF520PADM7
"Arrived on site to inspect dishwasher for intermittently cleaning dishes, upon inspection found the pump not working at all, replaced pump and motor assembly, no problems or leaks found. Complete"
Near Killeen, TX 76542
Al
Job Details:
12/30/2020
REFRIGERATOR FRIGIDAIRE FRS26KF6EBK
Arrived to inspect liner burned inside refrigerator section of a side by side refrigerator.C
Near Temple, TX 76504
Tyler
Job Details:
12/30/2020
WASHER WHIRLPOOL WTW5105HW0
Arrived on site for washer making a screaming noise during agitation and spin. Upon entering diagnostics I could not find any error codes that indicated any sort of hardware or software failure but after running a diagnostic agitation and spin I verify that the gear case is indeed grinding I then went ahead and replace the gear case motor drive and the cam assembly and upon completion of repairs a retest of the unit and then found out that the new gear case we were sent out with was defective and is grinding worse than the old gear case was office will need to reschedule once availability of new gearcase is known; ordrng 1 W11423758 (GEARCASE)
Near Georgetown, TX 78633
Lou
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL KRFF707ESS01
"Arrived on site to install previously diagnosed and ordered part. Due to the ice maker fill tube failing, I removed and replaced the fill tube heater and tested. Unit is operating as designed.
Near New Braunfels, TX 78130
Andrew
Job Details:
12/30/2020
DISHWASHER KITCHENAID KDTM704KPS0
"Arrived on site to test unit for leaking from left side door. When wash cycle started unit leaked immediately. Found drywall screw was between left door gasket and door. Removed screw, checked dispenser and vent tube. Tested unit and leak is no longer present. No leaks at time of service. Job complete."
Near Round Rock, TX 78681
Tommy
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRF767SDHZ01
Arrived onsite for freezer light going out. Upon arrival found unit switches and lights worked bottom freezer light was dead had moisture in bulb. Spliced new light in. Light is now operating correctly. Job Completed.
Near Cedar Park, TX 78613
Wesley
Job Details:
12/30/2020
WASHER WHIRLPOOL WTW4816FW2
Arrived onsite and found unit unable to be properly installed because valve had been broken during move.
Near New Braunfels, TX 78132
Noah D
Job Details:
12/30/2020
MICROWAVE WHIRLPOOL KOCE500ESS01
"Arrived on site to inspect microwave for not heating and causing sparks. Checked wave guide and found large amounts of silicone, will need new wave guides and clear all silicone, ordering covers. Office to reschedule ; ordrng 2 W10120230 (PLATE)s"
Near Austin, TX 78733
Kevin
Job Details:
12/30/2020
RANGE GE JGP940SEK2SS
"Arrived on site and replaced all parts that showed up. Took one picture of flame heights and sent it to KB/AHS. Right front burner switch is not working now, a new switch harness will be needed to correct issue.; ordrng 1 WB18T10452 (Switch harness)"
Near Austin, TX 78724
Matthew
Job Details:
12/30/2020
REFRIGERATOR WHIRLPOOL WRS588FIHZ00
"Arrived onsite to replace previously diagnosed parts. When replacing upper air duct, had the same result. Called tech line for assistance and stated duct requires air duct clips SR7729622343. Will order clips to complete job. Office to reschedule.; ordrng 7 W10331728 (clip)s"
Near New Braunfels, TX 78132
Noah D
Job Details:
12/30/2020
DISHWASHER MAYTAG MDB4949SDE0
"Arrived on site to inspect dishwasher or not starting up, upon inspection found the motor capacitor had melted
Near Austin, TX 78723
Matthew
Job Details:
12/29/2020
REFRIGERATOR WHIRLPOOL WRS588FIHV00
"Arrived onsite for refrigerator doors not aligned. Upon inspection found hinges screws backing out causing cam to not catch properly. Removed door to secure all screws, reset door and doors aligned properly, job complete"
Near Meadowlakes, TX 78654
Cliff
Job Details:
12/29/2020
OVEN WHIRLPOOL RBS305PDB12
Arrived on site to diagnose an oven that is not heating. Found failed thermal fuse. Replaced fuse and tested unit. Found all is working properly at this time.
Near Austin, TX 78753
Luis
Job Details:
12/29/2020
DISPOSAL GAGGENAU MY NAME IS BOB
Near Georgetown, TX 78633
Kayman
Job Details:
12/29/2020
DISHWASHER GE GLD6960N20SS
Arrived onsite for dishwasher making drinking or growling noise. Upon inspection I found the unit would start to rattle or make a loud chattering noise coming from the drain pump when engaged. It sounds like the pump is beginning to fail. I recommended replacing the drain pump and impeller kit.
Near Taylor, TX 76574
Andy
Job Details:
12/29/2020
WASHER KENMORE 110.2235251
Arrived on site for washer not operating properly. Tested and inspected unit and found failed control and failing gearcase. Also found issues with latch. No repairs are to be done at this time. No water leaks present at time of service.
Near Pflugerville, TX 78660
Scott
Job Details:
12/29/2020
DRYER WHIRLPOOL WED4850HW0
Arrived on site for dryer not heating. Found element burned out due to bra wire grounding out heater. Remove wire and replaced element. Heating unit is normal and drying properly no lint buildup at time of service job complete.
Near Horseshoe Bay, TX 78657
Cliff
Job Details:
12/29/2020
DRYER WHIRLPOOL MED6630HC1
Arrived on site to diagnose a dryer that will not always complete cycles. Tested unit and found no errors saved in control or failures to unit at this time. Advised homeowner that small loads may not always contact humidity sensors causing unit to shut off prematurely. No further repairs are needed and all is working properly at this time.
Near Pflugerville, TX 78660
Scott
Job Details:
12/29/2020
RANGE WHIRLPOOL WFC315S0JS0
Arrived on site for broiler draw missing glides . Installed glides . Broiler draw in now installed correctly in range . Job complete
Near Austin, TX 78745
Luis
Job Details:
12/29/2020
REFRIGERATOR WHIRLPOOL WRT108FZDM05
Arrived on site for no cool. Compressor running no frost pattern on evaporator diagnosed leak at lokring connection on evaporator ordering evaporator and compressor. ; ordrng 1 W11407409 (Evaporator) and 1 W11209866 (Compressor) and 1 W10897195 (Coupler) and 2 W11401413 (Coupler)s and 2 W11401417 (Coupler)s and 1 2hrs (2hrs)
Near Spring Branch, TX 78070
Andrew
Job Details:
12/29/2020
OVEN GE PT9550SF4SS
"Arrived on site to test unit for probe constantly lit when operating upper oven. Replaced meat probe jack and harness, removed old control board and found new control was damaged. Put unit back together, tested unit, same issue. Needing control board to fix issue.; ordrng 1 Wb27x21657 (board machine contro)"
Near Austin, TX 78750
Justin
Job Details:
12/29/2020
WASHER WHIRLPOOL WTW5000DW3
"Arrived on site for washing machine that was not agitating and would not stop draining unless unplugged. Upon arrival customer had unit unplugged and when I plugged it in it went right into draining and would not stop. I canceled cycle and drain stopped. I put unit into diagnostics mode and found no stored error codes. I put unit into test cycle and manual tests and found unit working as designed. I gained access to control and tested VAC to L1 and Neutral and found 120V. I then tested VDC at J12 connector and found low voltage with pin unconnected indicating malfunctioned control. Replaced control and calibrated unit, unit now working as designed. Call complete."
Near Horseshoe Bay, TX 78657
Cliff
Job Details:
12/29/2020
OVEN JENN-AIR JJW3830WP00
Arrived on site to replace UI for oven. Replaced part and tested unit. Found all is working properly at this time.
Near Austin, TX 78717
Tommy
Job Details:
12/29/2020
RANGE WHIRLPOOL WFE515S0JS0
Arrived onsite for previously diagnosed parts. Upon arrival replaced main harness and block.
Near Temple, TX 76502
James
Job Details:
12/29/2020
REFRIGERATOR WHIRLPOOL WRS588FIHZ00
Arrived on site and tested operation. Found damper very loud when opening and closing. Tested in diagnostics and it only recognized position ever 3rd or 4th cycle. Installed new damper and tested. Unit tests good. Job complete