Chance S

Appliance Express Rated 5.0 out of 5 stars based on 2 customer reviews

We serviced a
WHIRLPOOL BUILT-IN M/W
Model KMBD104GSS01
Near Salado, TX 76571
Chance S
Job Details: 08/25/2021
"Arrived on site for microwave not heating. Upon arrival I tested the unit with a glass of water for 1 minute and found the unit heating. I tested it again immediately after and found it not heating at all. I gained access to the control board and ran the unit a few more times to find it pushing intermittent voltage causing it not to heat every cycle. Im ordering a new control, UI and power supply to ensure a reliable repair. Office to reschedule when availability of parts is known.; ordrng 1 W11486764 (Control) and 1 W11486769 (UI) and 1 W11486781 (Power supply)"
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Temple, TX 76502
Chance S
Job Details: 08/25/2021
"Arrived on site for unit humming. Upon arrival the unit was unplugged and locked. Upon plugging the unit in the drain pump began to hum loudly. I entered diagnostics and began to cycle through error codes finding f9e1 drain pump, F1e2 motor drive over voltage, F8e6 water hazard, F3e3 inlet water temperature. When I finished checking error codes I tried to activate the lid lock and the unit would not unlock. While attempting to unlock the unit the f9e1 error code returned and the unit was then stuck trying to cancel a cycle. Upon attempting to check voltage at the outlet with my multimeter the outlet blew out. I advised the customer to seek an electrician before continuing with the repair. The unit will need a new drain pump and I will also order a new control to be install on return visit just in case. Office to reschedule when availability of the part is known and the customer has advised us that an electrician has inspected/repaired the outlet.; ordrng 1 W11447379 (Control) and 1 W11394572 (Lid lock assembly) and 1 W11033573 (Noise filter)"
We serviced a
WHIRLPOOL WASHER
Model MVWC565FW2
Near Temple, TX 76502
Chance S
Job Details: 08/25/2021
Arrived on site for washer leaving soap and brown spots on clothes. Upon arrival I entered diagnostics and found no error codes and all components passed testing. I inspected the bottom of the unit for any failed parts and found no issues. I then removed the agitator and wash plate to find a lot of dirty build up from powder detergent. I cleaned the area of any build up and advised the customer to switch to a liquid detergent so that the unit will completely break it down during a wash cycle. There are no further issues at this time. Call complete.
We serviced a
WHIRLPOOL WASHER
Model MVWB765FW2
Near Temple, TX 76502
Chance S
Job Details: 08/25/2021
"Arrived on site for washer making a loud noise during the spin cycle. Upon arrival I confirmed the complaint and began inspecting the unit. I gained access to the bottom of the unit and found oil thrown all over the bottom of the unit indicating a gear box failure. Upon disassembly I could not separate the gearbox from the basket due to the m being rusted together. An entire new basket assembly, outer tub, and 2 technicians will be needed to fully complete the repair. ; ordrng 1 W11161960 (Agitator) and 1 W10811957 (Basket) and 1 W11219115 (Outer tub) and 1 WPW10215093 (Drain pump filter) and 1 WP90767 (Drain filter screw) and 1 1 (2 man repair)"
We serviced a
MAYTAG RANGE
Model MER6600FZ2
Near Temple, TX 76502
Chance S
Job Details: 08/25/2021
Arrived on site for range oven not heating. Upon arrival tested unit and found the bake element not activating at all. I then gained access to the harness assembly of the unit and found the red wires burnt at the terminal block. I replaced the harness and reassembled the unit. After reassembly I tested the unit to find it preheating as designed. Call complete.
Leroy Thompson
Round Rock, Texas
08/13/2021
Overall Experience
Georgetown, Texas
08/11/2021
Chance arrived right on time, wore mask and went right to work. He got the problem diagnosed and resolved quickly and was on his way. Knowlegable and polite.
Overall Experience