Appliance Repair Sun City Texas

Appliance Express Rated 5.0 out of 5 stars based on 1 customer reviews

Near Sun City, TX 78628
Cliff
Job Details: 02/08/2021
RANGE WHIRLPOOL WCG55US0HS00 Arrived on site to diagnose a cooktop with a burner not operating properly. Found left rear burner Not fully installed. Reinstalled burner Properly and tested unit. Found all is functioning properly at this time.
Near Sun City, TX 78628
Jonathan
Job Details: 12/21/2020
UNKNOWN UNKNOWN NISSAN
Near Sun City, TX 78628
Jonathan
Job Details: 09/22/2020
UNKNOWN UNKNOWN NISSAN
Near Sun City, TX 78628
Lou
Job Details: 09/08/2020
DRYER WHIRLPOOL WED8000DW4 "Arrived on site to inspect dryer noises. Upon further inspection, the customer provided a video of the noise which sounded like the blower wheel or one of the rollers. I turned the unit on and tested and could not duplicate the noise. I disassembled the unit and found the blower wheel was broken. Removed and replaced the blower wheel and retested and unit is operating as designed. No lint observed during service, job completed."
Near Sun City, TX 78628
Paul
Job Details: 06/19/2020
DISHWASHER GE GDT655SSJ0SS Arrived onsite for a washer not drying again. I found the tub high limit tripped again. I reset the high limit and tested the unit in diagnostics. The unit was heating and working as designed. I tested the resistance of the thermistor from the control and found it correct. I found the control working as designed. I ran the machine and found it working as designed. I suspect loading issues causing the limit to trip and went over loading with the customer explaining to keep from loading large metal pots and pans in the lower rack above the tub where the high limit is. Call complete.
Joe
Sun City, Texas
05/06/2019
Great experience with the technician. Would recommend if you need any work done.
Overall Experience