Arrived on site to replace harness. Replaced main harness test unit and unit test good job complete.

"Arrived onsite for unit not functioning after install. Arrived onsite for unit not functioning. Customer stated unit was installed and never was able to use due to error. Tested and found unit attempts to fill and errors out. Ran diagnostics and recorded 9/2,8/4, 10/4 error codes. Returning with wash motor, inlet and float switch. Set to return Aug7, preferably After 10 am. ; ordrng 1 W11545764 (Float switch)"

Arrived onsite to replace failed strike. Replaced strike and tested to insure proper operation. Put unit in diagnostics and all cycles passed. Job complete.

Arrived onsite for washer not able to wash and found broken strike. Ordering strike to repair all else checks good. ordrng 1 W11457841 (Strike)

Arrived on site for leaking washer . Removed top panel and rear panel . Ran diagnostics wash several times . Ran quick wash and normal wash starts and couldnt duplicate leak . Did find wash next to unit wash running and leaking from door . Found build up under door glass and cleaned it up. Reran full wash cycle on other unit and no longer leaking . Suspect other unit was the leaking washer . Advised to wipe door glass periodically. Charged for diagnostics and 2nd man . Collected 303.08 AUTHO 33HPMJ; used 1 2nd tech from stock