"Arrived on site to test unit for slow drain, tested unit found disposal plug not removed causing no drain, removed plug and tested, unit is now running as designed, no leaks detected job complete"

"Arrived on site to test unit for not heating, tested unit found gas not flowing but gas pressure is good at the wall connection, removed connection at the dryer and found wire nut inside coupler connection, removed restriction and do to excessive amount of pipe sealant inside gas valve, replaced gas valve as well and tested, unit is now running as designed, no leaks detected job complete"

Arrived on site to inspect unit for no heat. Upon closer inspection found gas turned off to house. Will need to reschedule when gas is on. Office to reschedule. ; saved tckt

"Arrived on site to inspect unit for not cooling either section at all. Replaced start device compressor kicked on. But ui still unresponsive, opened control box found moles for ui not plugged in. Plugged in molex, tested unit, unit is running as intended. No leaks present at this time. Job complete"

Arrived on site to replaced sump and motor. Replaced motor test unit and unit test good job complete.