Arrived on site for a dishwasher that is not washing dishes. Inspected unit and work area. Around the unit through diagnostics and confirmed an F4 E3 (wash motor not running) error code. Around the unit through an auto test and found the wash motor would not run. I replaced the wash motor and tested the unit. I found the unit working an operating as designed with no leaks present during operation. Call complete.

Arrived on site to install previously diagnose part. Inspected unit and worked area. Replaced the bake element and tested the unit. Found the unit working and operating as designed. Call complete.

"Arrived on site for a dishwasher that will not wash dishes. Inspected unit and work area. The customer advised the unit does fill, dispense soap, and drain bit that the soap never actually dissolves. I ran the unit through diagnostics and found an F4 E3 (wash motor not running) error code. I did confirm the wash motor would not run in an auto test and replaced the wash motor assembly. Tested the unit again and the unit began to work and operate as designed with no leaks present during operation. Call complete."

"Arrived on site for a washing machine that is going off balance and refilling. The customer advised that they have uneven floors in their laundry room and they assumed that that might be the issue. When they moved the washer to a different location, the unit seem to do a lot better with finishing out loads. I did confirm the uneven surfaces and checked the suspension. Found the suspension was good. I ran the unit through an auto test and the unit ran as designed but I found the washer rocking. I went ahead and adjusted the feet on the washer to level out the unit. Tested the unit and the unit is working and operating as designed. Call complete."

"Arrived on site for a refrigerator that has ice thats clumping. Inspected unit and work area. The customer advised that the issue was not with ice clumping but with the icemaker not making ice. She advised that she has had this happen several times where she has had to turn off and turn back on the icemaker for the icemaker to work. However, recently, she has been experiencing no ice production at all. I did confirm very little ice in the ice container and went ahead and replaced the icemaker. I tested the unit and found the unit working and operating as designed. Call complete."